Jump to content
SAU Community

Help! replace r33 rear spearkers


Recommended Posts

there should be 2 bolts holding the bottom of the rear seats, undo them then you have to lift it up quite hard.. it should come out. there should be another 2 bolts holding the rear of the seats, undo them. Now take the parcel shelf off gentally as you dont want to snap it. unscrew and replace speakers :D

my parcel shelf was tuff to get off, had those baby seat bolt thingys in it when it was complied. You might have to unbolt these through the boot. There are other clips you need to unscrew through the boot as well.

I couldn't fit 6x9s because the left side speaker touchs the battery.

If you intend to fit a sub, don't bother with the 6x9's.

Personally, i bought a "top of the line" set of Hertz 6" mid bass woofers for the rears, does the job :( (After all it is a performance car and you don't want to weigh it down with subs, etc.. ;) )

Only want to say that you don't have to cut the metal to fit 6x9's. Just have to put them in on an angle to follow the existing "D" shape cutout in the body.

I have put Sony Xplod 6x9's in (these are not particularly slimline or anything). It is fiddly but it can be done.

I posted details of this some months ago. See attachment

Enjoy

Factory R33 S1 speakers are 6.5" all round! . After listening to others on this forum say 6, I went out a bought 6s only to waste 4 hours making brakets to fit them properly :(

And yes, the backseat will need to come out before you can get at the rear speakers.

Do a search in the Car Audio section :uh-huh:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...