Jump to content
SAU Community

Recommended Posts

Hey guys,

Whenever I come to a stop my car will idle fine, but then after a few seconds it will drop and the car stalls.

Sometimes it won't stall and it kicks back up to normal again.

Previously my R34 was running fine, yesterday I bought a cannon muffler and got it installed, and it didn't have the problem beforehand.

I took it to my mechanic and he reset the ECU but I'm still having the same problem, he then increased the idle to 900 but still it drops and comes close to stalling (but hasn't stalled on me with the increased idle yet).

Has anyone had this problem before? Can you please help me diagnose the problem? :blush:

Any help/advice?

Link to comment
https://www.sau.com.au/forums/topic/257920-idle-dropping-car-stalling/
Share on other sites

I'm not a mechanic, but if you took it to a mechanic who simply increased your idle i would search for a new one! I would start by checking your afm and give it a clean with spray on contact cleaner (available from dick smith etc)

I have no idea, but remember it could just be a coincidence. Don't kill hours trying to solve the problem based on the muffler install, start with simple, cheap 5 minute checks and see if it helps. If you had installed a full exhaust that was much more free flowing and had an oiled pod filter the extra air drawn through can put oil on the afm and cause false readings. While this may not be the case, it is where i would start before doing more time consuming things, which is why your mechanic tried simply resetting the ecu before anything else like getting the spark plugs out and checking for fouling etc

Once again though, I'm not a mechanic

its gotto do with back pressure of the exhaust if its related to the cannon, was the old reonator removed and replaced with the canon? ive got a feeling its the 02 sensor and the ecu combined, I had the same problem in a manual r33 gts-t.

My solution was partly due to a number of things...

i cleaned AFM,

Changed spark Plugs,

Cleaned throttle body....

gained alittle more power and car stopped stalling, but it would still drop almost to a stall at roundabouts and stuff....

i ignored the problem since it didnt complertely stall anymore and just thought its an old engine....

i changed the 02 sensor from the original nissan one to an EL falocon 02 sensor for $70 from repco, cut the wires and tied them together and replaced the old one....not only did i gain an extra 100-200km/tank but to my surprise my revs stayed constant at idle and never dropped below 700rpm no matter how i drove it...

most likely your 02 sensor is broken coz they meant to be changed every 40 000km anyway. you will spend $70 on a falcon one like i did or $200ish for nissan replacement part, either way you will definately get your money back by saving fuel over a few months...

see if that works, and if it doesnt, the money you save from fu3el with the 02 sensor will help you to pay a profesional to find the prob...

its located at the beginning of your exhaust pipe just after the engine....

100% the O2 sensor is dead, my car is doing it right now as well and has happened a few times in the past. Change the sensor and everything runs like new again :down:

Which O2 sensor? And where is the O2 sensor located? (car is a R34 98 Automatic, 4door non turbo)

The 02 sensor is located on the exhaust manifold. If you're not too good with wiring etc - best stick with a genuine 02 sensor :D

Also check for vacum leaks (vacum hoses) and the main intake pipe between the afm and the throttle body - make sure its on firmly.

While you're at it it is a good time to clean the throttle body too.

  • 11 months later...

mate belive me,

try these steps.

before u stops the car put it into N. see how u go. if it not stall that is ur Automatic Transmission.

just chk ur fliud level. 100% its too low. top up with fluid in between L-H make sure to not to over fill.

see how u go.

if not, dont waste your time with doing crap.

possible case is ur TCC Solenoid in the auto box. it is not a expenvice part. [$50-70] if u have a skill u can do it by ur self. other wise take it to good transmission repare workshop.

if u in sydney PM me i will tell u where to go.

Hey guys,

Whenever I come to a stop my car will idle fine, but then after a few seconds it will drop and the car stalls.

Sometimes it won't stall and it kicks back up to normal again.

Previously my R34 was running fine, yesterday I bought a cannon muffler and got it installed, and it didn't have the problem beforehand.

I took it to my mechanic and he reset the ECU but I'm still having the same problem, he then increased the idle to 900 but still it drops and comes close to stalling (but hasn't stalled on me with the increased idle yet).

Has anyone had this problem before? Can you please help me diagnose the problem? :banana:

Any help/advice?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
    • Final update!!! Got the front bar fitted and sprayed and all sorted now. My cutouts worked great and the indicators aren’t just falling off. 😂  
    • Is this a brand new LSD? if so, have you followed any break/bed in procedure for it? Usually involves heaps of figure 8 patterns, a fluid flush.
    • It's TWO steering wheels actually. 😛 one for each hand They are wheels, and they steer!
×
×
  • Create New...