Jump to content
SAU Community

Recommended Posts

Hey guys,

I've been searching and digging around for some info, but I can't really find what i need...

Anyway, I have an RB25DE head from an R33 (YES it HAS VCT!)

Now, I had a workshop do the tapping of the hole for the oil feed to the VCT...

Now my issue seems to be, he's tapped the hole on the SIDE of the head...

IE, pretend you're bolting on the inlet plenum, the way that bolt is being done up to bolt it to the head, is the same way you would do up the oil fitting to the head...

As in, the hole is on the side, not the front...

Now, why such an issue I hear you all ask... Well issue is, when I have the little adapter, plus the oil line bolted onto it, it fouls on the water feed into the plenum.

As in, the actual fittings JUST clear it, but the alloy oil line fouls it, no matter how hard you turn it, as the fittings JUST clear (As in, half a millimetre)

So I went back to my local place for getting bits and pieces like this, after a bit of chatting, instead of running a straight adapter out of the head, I got a 90 degree bend so I could clear everything...

ISSUE! This fitting cant be screwed in, as it fouls on the head as you turn it to screw it in (Where the stud goes through, it hits this bulge)

So, I'm wondering, how have others done their oil fittings if their hole is tapped in the same spot.

OR, if I plug this hole, and DON'T feed my VCT any oil at all, what issues can I encounter? Should I pull the VCT valve out and just put a plug in here too? Or would I be better off getting a fitting that will fit the VCT hole, plugging the one I tapped and just feeding constant oil up there. (I don't care right now if VCT does, or doesn't work)

I don't have the cash to change cams, hence, not worried right now if I lose VCT, so long as i don't smash a motor to pieces...

Any help...

Thanks

Link to comment
https://www.sau.com.au/forums/topic/257996-rb25-head-vct-modifications/
Share on other sites

Hey man,

I can't exactly go drilling and tapping shit at the moment, as the head has already been service, cleaned and rebolted to the motor.

I'm at the part of needing to get this oil line done, so I can put my inlet plenum back on...

You may not have any other option. Can you gat a 45deg fitting instead of the 90 deg one you bought, it may be able to be screwed in and clear the inlet manifold. Has the workshop offered any advice as to why they did it this way instead of the way everyone else does it?

I drilled into the end of the bush which faces the front of the car. This means that no fileings goes in side the engine.

all you have to do is pull the plug out. modify it and push it back in. job done

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • One thing I can tell you is, do it properly the first time. If you encounter unexpected problems just let the car sit for a week or two if you have to get some other parts or figure stuff out.  I'd have said go and use as many OEM parts as possible but since you want to change the turbo later on a custom kit is probably the better choice. Since I have no experience with RB25 just compare parts diagrams and images before buying a line kit and it should be easy to see if it has everything you need. Amayama has very good parts diagrams and part number lists, that is what I used a bunch to figure out what I might need. And don't forget to plan ahead and possibly renew other stuff that's easy to get to while you're in there doing the turbo lines. Happy wrenching
    • Update 4:   Hi all, good news. Engine is running and all the gaskets and seals seem to be working as intended. No leaks so far, even the JB Weld seems to hold. I flushed out the old coolant a few times and put in fresh coolant, not Nissan stuff, I decided to try the Ravenol Protect FL22, they claim it works for a wide variety of JDM cars and the opinions on it by some people were pretty good. And it has the nice poison green color! And man am I glad I bought a coolant system tester earlier this year, vacuum filling works wonders on this engine. I can definitely recommend this to anyone still doing it the old school way. All you need is compressed air supply. Will have to do a small test drive as soon as I can, I removed the gauge cluster again as the tacho needle was still bouncing around a bit but it was much better than before already.  I also found some cracks on all 4 tires inner and outer sidewalls. Apparently these tires should 't be parked on for extended periods or be kept under 0 degrees during storage, which I did not know. Clearly the previous owner didn't look into those details either, he probably bought them just cause they are cool semi-slicks. I'm just wondering how tf I am supposed to reach 30-80 degree tire temperatures on the public road consistenly, these tires were never going to work for my use case. I'll probably order Continental SportContact7 ones as these are the best allround summer tire available right now and I don't think I'll need anything crazier for now. Do let me know if you have experience with various tires and which ones you recommend.
    • You have no idea how many goddamn boxes I received these past three months haha Most have been put to use by now though, luckily
    • Not going to pretend I didn't do a bit of junky work this time around, but mostly due to the fact that some things I am not willing to spend days fixing right now, like wiring. I try to do most things properly the first time around.
    • Regardless of neglect or incompetence, fixing either is tedious and annoying. Most of the neglect on my car is definitely rust. I hope I can at least pass inspections later on and they won't fail the car due to slightly corroded hardlines. I was generous with rust converter and wax and it looks ok, most lines in the rear are hard to see properly anyways.  Definitely will test them though to make sure they don't rupture under pressure, in that case the car isn't going anywhere this year.
×
×
  • Create New...