Jump to content
SAU Community

Recommended Posts

hey i recently bought a 1993 r32 nissan skyline GTS-T with the following modifcations.

Pod filter

Blow off valve

koni adjustables

blitz access ecu (was told either came with the car or was optional when sold new)

i have a few questions.

1. just wanting to know whether there is any information that i need to know about this car or the rb20det engine

2. since i have the blitz access ecu, are they any good?, wat are they like when tuning?, and do many people use/tune them

3.i have noticed lately that when idoling the engine fluctuates around 100 revs, i have placed new sparkplugs and gtr coils due to one dying, would this just be a tune and maybe a dyno that i need?

4. How do i know if the car is running lean?

Link to comment
https://www.sau.com.au/forums/topic/258067-r32-general-discussion/
Share on other sites

if your not sure about anything, first thing you should do is take it to a good workshop, with a dyno.. get them to do a FULL service and dyno run. anyone can tell you that theyve had this done and that done... but if you get it done yourself... you will be sure.

most japanese ecus run too rich for aussie fuel.. engine idle could be many things... like a leaking bov, dodgy air flow meter, etc.

keep caroozing this site, and do searchs first before posting a topic asking a simple question.. most topics have already been covered many times.

as for information on the car or the engine... what is it you'd like to know?? the RB20 is the underdog of the RB engines... people dump on it before giving it a chance, but they are capable of being thrashed over and over and handling more power than they have any right to.

the r32 is getting on a bit now, so most of the suspension bushes etc are due to be replaced..

cheers

Linton

1. just wanting to know whether there is any information that i need to know about this car or the rb20det engine

2. since i have the blitz access ecu, are they any good?, wat are they like when tuning?, and do many people use/tune them

3.i have noticed lately that when idoling the engine fluctuates around 100 revs, i have placed new sparkplugs and gtr coils due to one dying, would this just be a tune and maybe a dyno that i need?

4. How do i know if the car is running lean?

1. Nothing especially

2. I've not heard of them. Some guy here reckons that it can only be tuned in the US, and some other guy here reckons they're pre-set and not tuneable.

3. Could be lots of things - try searching

4. Run it on a dyno

yeah cheers guy, i just recently was told by a tuner that the blitz access model are locked and the only real way to tune them is if u have the code (which i dont) or for them to be remapped, not cheap :-(

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
×
×
  • Create New...