Jump to content
SAU Community

Recommended Posts

hi all,

i did a quick search and couldnt find exactly what i was after.....so i thought i would quickly post something up in here...

Ok have a S2 r33.....rb25det......so u know what ur workin with....and its auto

wantin to put a BOV on it....?? is this ok/safe to do?? i have been told about stalling problems by doin so?? or do i simply clean out my AAC out and all that to stop that???

so yeah, jus finding out if its all ok to install one and that i wont have any problems with it...

let me know

Cheers

Link to comment
https://www.sau.com.au/forums/topic/258106-bov-on-an-auto/
Share on other sites

yeah it will stall....

even with a full block off plate in the bov (for fulleh sik flutterz) it will stall.

at low rpm, like braking to turn a right angle corner across lanes slow speed etc. aftermarket bov or blocked bov will stall with the auto.....

so.. what to do?

grab a piece of metal, thicker than a coke can preferably.

grab the bov gasket, and cut metal to shape. Im using some .5mm thick aluminium plate.

so cut to shape, drill 2x bolt holes, then with smaller drill bit drill a couple of small airflow holes - circular like in the centre for some minor airflow

install nice and tight

test drive, you'll still have the bov, but it will flutter a bit, boost feels "tighter" (?),

because it isnt entirely blocked off it wont ever stall but sounds pretty cool (just like a $200 aftermarket bov, tried that) and boost pressure seems to be slightly more "on tap" than previously

wife loves it, hated it when she stalled it, so I drilled the little holes in the middle of the block off plate and now it doesnt stall but flutters very nicely indeed :P hektic-br0

Link to comment
https://www.sau.com.au/forums/topic/258106-bov-on-an-auto/#findComment-4438876
Share on other sites

ahh ok cool....so jus get a blanking plate...and install one of them....but make sure i put some small holes in the middle of it so it has some air flow to stop the stalling???

yes!!

coke can will do, but thicker metal seems less dodgy to me :P

my centre-drilled bov block off plate is nicely filed and machined, 30min home project after a few bongs ey? !

Link to comment
https://www.sau.com.au/forums/topic/258106-bov-on-an-auto/#findComment-4438884
Share on other sites

hi

i am confused what you want to do?

a) make the car make bov noises?

b) fit a different bov?

c) make it flutter ?

if a, fit a pod filter, the std GTST already has a bov

if b, change the bov to a different one, just dont go for an AMTO venting one, that will make the car stall

if c, block the std bov off as Tangles has said, that will make it surge and flutter

the stalling occurs when using an AMTO setup, that is, you dump the bov'd to the atmosphere

Link to comment
https://www.sau.com.au/forums/topic/258106-bov-on-an-auto/#findComment-4438905
Share on other sites

on auto paul even with full plumback ater-market bov it will stall

with blocked bov it will stall

only ever occasionally but will do

so you do the bov backing plate, put some small holes thru the centre of it, and it wont stall, but will be like option ©

Link to comment
https://www.sau.com.au/forums/topic/258106-bov-on-an-auto/#findComment-4438956
Share on other sites

Brendo, you FAIL :thumbsup:

Blocked bov, havent stalled it yet! Rev's hunt if i am WOT thru 1-3 then stomp on the brakes(eg, fwy :laugh: )

i blocked mine to see if my FMIC would make good sounds, its shit, so unblocking it.

even if it does stall, if you can drive with webbers, you can drive a car with an atmo or blocked bov

Link to comment
https://www.sau.com.au/forums/topic/258106-bov-on-an-auto/#findComment-4439232
Share on other sites

Had no probs on the rally car with atmo BOV and it runs AFM. Used to with the old Blitz but changed it to a GFB Stealth and set to full atmo and no probs. Used to stall with the blitz as the piston wasn't closing so had to continually stab the throttle when braking to a stop. Was no probs though.

Was thinking of taking the Stealth off the Mazda to put on the GTR cos you can vent just enough air back to the inlet to stop the stalling but still get the sound of the atmo BOV. Dunno yet if I'll do it but might be fun for a while, I do miss the sound it makes.

Link to comment
https://www.sau.com.au/forums/topic/258106-bov-on-an-auto/#findComment-4439898
Share on other sites

Guest jaysiin001

i have been told stalling issues will occur.

however i have a megasonic on my r33 manual. it does not stall.

it only stalls if i have the a/c going and when i change gears. but, if i change gears at a normal pace it stays alive. but it i change gears slow and let the revs go down, it will stay down and stall.

Link to comment
https://www.sau.com.au/forums/topic/258106-bov-on-an-auto/#findComment-4439963
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...