Jump to content
SAU Community

Recommended Posts

  • 3 weeks later...
Hey..

How much for the Grille and thermo fan?? Thats if you still have them...

Im in Vic 3805

Cheers

I still have both

$30 for the grille

$50 for the thermo (blade pulled off the motor still works just needs a new nut)

And id say roughly $30-$40 freight as there quite big.

  • 2 weeks later...
Do you happen to have the factory leather auto shift knob, if so how much delivered to brisbane?

i will have a look thru the pile and get back to ya.

  • 3 weeks later...

Bump

Will swap everything thats left (adds up to $2200ish) for a set of R34 GTR rims or something wide and nice offset, sick of the stock autech rims (which can be included in the swap).

Or someone just buy the lot and i'll do a deal, old man wants it gone from his shed, the "few months" i said it would take to get rid of it has been and gone.

still got the 02 sensor

i have a heap of 02 sensors, i am unsure if they work or not so not to keen on selling them on, best to get a new one, i think the EL falcons ones where the same just had to put ur plug on it, around the $70 mark?

  • 5 months later...

Hi mate, any chance you might still have the LHS mirror and black mounting arm (mainly after the black mounting arm)? Getting desperate to find one. Live in Brissy and happy to pay freight. Cheers.

Hi mate, any chance you might still have the LHS mirror and black mounting arm (mainly after the black mounting arm)? Getting desperate to find one. Live in Brissy and happy to pay freight. Cheers.

All good, found one locally :action-smiley-069:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
×
×
  • Create New...