Jump to content
SAU Community

Carbon Fiber Bonet

Kerr34

By Kerr34,
in Western Australia

 Share

Recommended Posts

2LV8ETR Mentor

2LV8ETR

Posted
Posted
hey guys just wondering if people have any idea on cost, installation, where i can get them from and your opinions on looks

Greets man.

My opinion only:

Buy one yourself and install it yourself - it's just a few bolts and some lining up to do.

As far as getting them, try doing an online search and you'll find many places that have them. If you don't have a retailer close, just get them to ship it to your doorstep.

The other thing is they do look good. But unless you garage your car when not in use, they fade. I've got one on my race car and after 2 years it's fading.

Hope this helps.

Later!

Kerr34 Rising Star

Kerr34

Posted
  • Author
Posted
Greets man.

My opinion only:

Buy one yourself and install it yourself - it's just a few bolts and some lining up to do.

As far as getting them, try doing an online search and you'll find many places that have them. If you don't have a retailer close, just get them to ship it to your doorstep.

The other thing is they do look good. But unless you garage your car when not in use, they fade. I've got one on my race car and after 2 years it's fading.

Hope this helps.

Later!

just wondering about the fading how about if the car is permanently under a car cover (the ones that u put onto the car to stop wind rain etc. will that decrease the fading?

2LV8ETR Mentor

2LV8ETR

Posted
Posted
just wondering about the fading how about if the car is permanently under a car cover (the ones that u put onto the car to stop wind rain etc. will that decrease the fading?

Should do. It's only fading because the car is in direct sunlight all of the time.

PSI Parts Veteran

PSI Parts

Posted
Posted

Check to see if the car cover is UV resistant, along with a UV resistant clear coat, which can easily be reapplied if you are unhappy with the fading.

We might have some Z tune style hoods left, doing a stock take this week :down:

Char Experienced

Char

Posted
Posted (edited)

yer their illegal, insurance wont cover them,

they can have just a little problem what with possibly come thru ur windscreen and take ur head off

to quote Evman from just commodores

"The reason they're illegal is because they change the crash rating of the car. Where a metal bonnet would bend and buckle, a carbon fibre bonnet wouldn't. For example, if you hit a pedestrian, a carbon fibre bonnet would be more likelly to cut into the person rather than bend. Here's some trivia - one of the reasons the cost blew out on the Monaro 427 was because of it's carbon bonnet. The problem was, in a frontal impact, the bonnet would be pushed through the windscreen, into the driver and passenger. Scary really. "

Edited by Char
br3ndan Mentor

br3ndan

Posted
Posted

in wa is possible to get a permit for the bonnet.

As long as there isnt too many Vents and whatever crap on them.

How do i know this?

Ive seen a permit for a fibreglass bonnet with a sheet of carbon on top. Althought his one didnt have any vents on it.

R DIRTY 3 Grand Master

R DIRTY 3

Posted
Posted
yer their illegal, insurance wont cover them,

they can have just a little problem what with possibly come thru ur windscreen and take ur head off

to quote Evman from just commodores

"The reason they're illegal is because they change the crash rating of the car. Where a metal bonnet would bend and buckle, a carbon fibre bonnet wouldn't. For example, if you hit a pedestrian, a carbon fibre bonnet would be more likelly to cut into the person rather than bend. Here's some trivia - one of the reasons the cost blew out on the Monaro 427 was because of it's carbon bonnet. The problem was, in a frontal impact, the bonnet would be pushed through the windscreen, into the driver and passenger. Scary really. "

I think youll mind thats actually a myth....but its the right theory

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • The Bogan
      NC MX5

      By The Bogan · Posted

      Kittens in first to claim dominance of the residence, then puppies later From past experience, the other way around can be problematic to say the least  Those weird "Dobby looking"  little kittens are not cheap....LOL
    • MBS206
      NC MX5

      By MBS206 · Posted

      At least yours have parkour down pat. One of mine will still trip over his own shadow and fall over... He's a special type of cat... Ha ha ha
    • MBS206
      NC MX5

      By MBS206 · Posted

    • SteveL
      Leak from Tokico BM50 Brake Master Cylinder

      By SteveL · Posted

      The question then becomes - was there any fluid coming from that hole before you did the rebuild ?    You may not have noticed, of course.   Depending on how you did the rebuild, the possibility has to be considered that somehow (cleaning ?)  fluid entered that hole and is now being 'forced'  out by small movements of the proportioning valve.   From the factory, there's actually a small rubber plug in that hole but with age and under-bonnet heat it's quite common for it to 'go missing'.  That rubber plug is designed to allow the venting process but also to prevent 'stuff' getting to the area (prevent corrosion, etc).   The plug is also not available as a spare part AFAIA. Personally I wouldn't race and buy a new master just yet but keep an eye on the area to see if the 'leak' continues.   If you're concerned about brake fluid damaging nearby paintwork, cable tie a piece of suitable absorbant material over the hole and remove/monitor occasionally.    Operation of the proportioning valve and the brake master itself won't be affected, but also keep an eye on brake fluid level, of course. In terms of a new master, the genuine part is getting expensive, unfortunately.  Amayama is showing AUD900+.   I was searching recently and there's an aftermarket part available from Japan made by 'Parts Assist': https://zenmarket.jp/en/yahoo.aspx?q=BNR32%2bBM50&p=1 Whether it's any good I have no idea, although in my experience Japanese aftermarket stuff is pretty good quality-wise.   The above site allows overseas buyers to purchase stuff more easily from Japan but there are fees and shipping costs, of course.   The original Japanese seller page is here: https://auctions.yahoo.co.jp/jp/auction/p1197401228 Copper/Nickel is fine but I still prefer bundy tube and it's also cheaper.
    • Duncan
      NC MX5

      By Duncan · Posted

      Your chihuahuas look weird!
×
×
  • Create New...