Jump to content
SAU Community

Recommended Posts

  • Replies 66
  • Created
  • Last Reply

Top Posters In This Topic

So your car was actually a legal height at the time?
the car was set to legal height when the gear was installed

Not at the time of instal. At the time you got pulled over was it a legal height and would it have been so if on level ground? If when you took it back they didn't need to change anything to make it a legal height then you'll have a leg to stand on.

Link to comment
https://www.sau.com.au/forums/topic/258570-defected/page/2/#findComment-4450872
Share on other sites

just went and took some photos with a spirit level and there is an extreme upward angle and an extreme left angle

both of these would make the car appear to low for the officers 110 mm measuring stick

(the wheels on the measuring police stick are 110 mm's in height )

i will get these pics blown up to take to court if i am able to adjourn it for another 3 weeks at my traffic lawyers request

cant wait till court tommorow!

Link to comment
https://www.sau.com.au/forums/topic/258570-defected/page/2/#findComment-4458002
Share on other sites

Being not level ie: a slope, incline ect doesn't make any difference to the measurement.

If the slope is constant with no undulation the measurement will be true.

You need an undulation, like a hump between front and rears or pothole..so the road is raised between your wheels or wheels lowered.

Goodluck with that.

Link to comment
https://www.sau.com.au/forums/topic/258570-defected/page/2/#findComment-4458033
Share on other sites

True the law is the law.

You'd have to have sponges for springs for an incline or decline to affect the test.

A flat surface is a flat surface whether it's tilted left-right up or down.

The issue is whether the surface was even (flat) ie: no undulations between the wheel base.

In other words the test can't be carried out on say a corrugated dirt road.

Hope he lucks out and gets a stupid judge.

Link to comment
https://www.sau.com.au/forums/topic/258570-defected/page/2/#findComment-4458476
Share on other sites

the point i have is that the upwards and left angle of that particular part of road is going to make quite a few stock cars fail the same "110 ''mm" height wheel

including a very stock vt ss commodore which came in at just under 100 mm

but upon taking it to flat ground both cars were fine

heinz tomato soup is 100 mm high and nothing catches on it underneath the skyline

i have also purchased the same wheel they have used to measure the ride height with as per my lawyers request

and thanks for the many good luck comments chaps lol

oh and if i do get raped

as the qld gov probably dont want me to win as then that will set a precedent and the flood gates will open with every low car claiming they were missmeasured

if i lose ill sell the skyline and import a 240zg with all the fruit

since it does not have 4 round tail lights im sure ill never be harrased for doing nothing again

lol

Edited by DAS KAMU
Link to comment
https://www.sau.com.au/forums/topic/258570-defected/page/2/#findComment-4459339
Share on other sites

Being not level ie: a slope, incline ect doesn't make any difference to the measurement.

If the slope is constant with no undulation the measurement will be true.

You need an undulation, like a hump between front and rears or pothole..so the road is raised between your wheels or wheels lowered.

Goodluck with that.

the spot i got done on did make a differance

Link to comment
https://www.sau.com.au/forums/topic/258570-defected/page/2/#findComment-4459373
Share on other sites

True the law is the law.

You'd have to have sponges for springs for an incline or decline to affect the test.

A flat surface is a flat surface whether it's tilted left-right up or down.

The issue is whether the surface was even (flat) ie: no undulations between the wheel base.

In other words the test can't be carried out on say a corrugated dirt road.

Hope he lucks out and gets a stupid judge.

surface was not flat

the judge today seemed to be on the ball

just a pity it was in richlands fuggen toothless junkies all over the place

Link to comment
https://www.sau.com.au/forums/topic/258570-defected/page/2/#findComment-4459379
Share on other sites

when it is all sorted ill post it all up

ill be scanning in the transcripts from the court date set for the 19/03/2009 at 9am

as i adjourned it today for 2 weeks

at least some of us who are not cops on here will see how the system "works"

i am yet to find someone who is willing to share the same information which sucks balls as id like to see how it all goes down

2 weeks till the big day

Link to comment
https://www.sau.com.au/forums/topic/258570-defected/page/2/#findComment-4459583
Share on other sites

when it is all sorted ill post it all up

ill be scanning in the transcripts from the court date set for the 19/03/2009 at 9am

as i adjourned it today for 2 weeks

at least some of us who are not cops on here will see how the system "works"

i am yet to find someone who is willing to share the same information which sucks balls as id like to see how it all goes down

2 weeks till the big day

Nice work, good win.

I'll retract that for later use...

Back to Good luck for you.

Good Luck

Link to comment
https://www.sau.com.au/forums/topic/258570-defected/page/2/#findComment-4460305
Share on other sites

Jaonson... Cameron here brads mate.

This reminds me of something that happened to my brother in his "civic" the other week, the cop was off duty and saw my brother come down the hill from caltex and turn left into horizon drive and come up behind him so the next day I was working from home and looking out the window at the time and saw the Red highway cop car pull up out the front... just at the time I hear my mother yell out "Cameron what have you done this time!"

Cop walks up the driveway and asks if my brother was hoem and I explained he was at work, he explained why he was looking for him etc. he wanted to check his car for the height of his car... things I see wrong with this was... his car is registered under my fathers name not his hes not on it... yet he asked for by name :S

Cop preceeded to goto his worksite, he works for leightons and measure his car to fine him $100 and 1 point but didnt make him goto court over it the car was 85mm due to the exhaust coming off its hanger.

Goodluck with the car J,

Link to comment
https://www.sau.com.au/forums/topic/258570-defected/page/2/#findComment-4462476
Share on other sites

just went and took some photos with a spirit level and there is an extreme upward angle and an extreme left angle

both of these would make the car appear to low for the officers 110 mm measuring stick

(the wheels on the measuring police stick are 110 mm's in height )

i will get these pics blown up to take to court if i am able to adjourn it for another 3 weeks at my traffic lawyers request

cant wait till court tommorow!

isnt legal height 100mm? if so 7 mm under that 110mm measuring wheel would actually be legal by 3mm...

Link to comment
https://www.sau.com.au/forums/topic/258570-defected/page/2/#findComment-4462657
Share on other sites

i took note of the wheel he had and i went and searched all the hardware stores for it

i found it and it is marked on the label as 100 mm's

but i assure you upon meusuring it - it is 110 mm's

its nice to have a bit of time to investigate

i hope i get a good result out of this

ill also be compiling a letter to the CMC of whoever the governing body are to keep these officers in line

Link to comment
https://www.sau.com.au/forums/topic/258570-defected/page/2/#findComment-4463634
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • PRICE  : $1400 LOCATION   : NSW Central Coast FIT  :  All Nissan 350Z type Z33 and Infinity G35 Coupe. See delivery note. Hi, brand new, unused, still in the box.  ($1850.00 is what i paid ) My bad luck !!! I thought my right front  Bilstein was cactus so i bought the ST 's to replace all.  Turns out the right front is fine ( loose mounting after service  by a well known importer of Bilsteins ) So im selling the ST's. They are made by KW ( no intro needed ) . Iam on the Central Coast and im willing to meet up in Sydney metro, within reason and Newcastle.
    • Yep, yeah would need to do the flywheel although the 6 bolt NA clutch can handle a 20de if just wants to replace the stocker.
    • No it's fine. Heat sleeve is a thing. With oil running through it it is unlikely. Engine off heat soak can be a thing though. There is no way that you have a leak through the hose. That has pressure behind it and any small hole will turn into a large one in very short order. It is so much more likely to be leaking from the connection.
    • Really? That's piss weak. I didn't know they hobbled the shitboxen that badly. OK. So probs need to buy a flywheel too. But that's not too bad.
    • Hi all. I already posted some newbie-ish questions here and there but this will be my first "big" post. Last summer I went and fulfilled a kind of childhood wish, because I just thought I needed this experience in my life no matter what. The car I bought is a mildly modded 1995 BCNR33 Vspec. It was repainted to a metallic orange color all around and it had all windows reseated. Not so well done black respray in the trunk and a metallic black in the engine bay. From outside it looks very nice except for a minor paint error on the roof and the rear spats needing new adhesive tape. The inside is pretty clean and no broken plastics, missing or faded buttons. Even the adjustable mirrors and trunk antenna work like a charm. Despite a moderately long list of issues I don't (yet) regret buying this car. Most mechanical problems are just due to age, like worn rubbers here and there. The underside sadly has lots of corrosion, especially to the back. It looks like it either has been driven in the winter for a while or it lived near the saltwater in Japan, the rust is nothing terrible but it'll require to be looked after. Mostly panel gaps and all the mounted components underneath are a bit crusty, but I don't think anywhere has progressed so badly that there's going to be holes. Front right jacking rail is crushed and needs some care so it doesn't develop into a rust crater at some point. Worst part is definitely the strut towers. I thought they looked fine but after taking off the strut bar I noticed that it actually started bulging up on the passenger side. Probably would have passed on the car or negotiated down by some thousand Euros more if I had noticed this before buying, but here we are. Trunk area also has signs that there was a water leak to the interior once but nothing too crazy, I guess lots of Skylines had this at some point. As for the list of (known) issues, I'll try to make this compact. I hope the coloring is self explanatory. Mechanical: -Various busted or soon-to-be busted rubber bushings and ball joints. Will replace ball joints with OEM or better and bushings with polyurethane where possible. -Shaking steering wheel at above 80kph -downshift from 5th to 4th is a bit crunchy unless I rev-match, might just try to renew the shifter assembly, but it's not a priority issue -tailshaft centre bearing could use a replacement, is it worth going 1-piece tailshaft as it doesn't look too fresh all around? Chassis: -underbody corrosion on many spots and in hollow spaces, needs to be treated -corrosion on many bolts, hoses, lines, suspension components, subframes, will be treated when replacing of the bushings is needed as time goes on -strut tower top panels and some of the surrounding panels are rusty, so needs fixing. Will look into doing this with a buddy in the winter, otherwise bite the bullet and pay a professional -driver side door is misaligned to the body and needs to go a slight bit more inwards -both door windows are misaligned and have an airgap where the window meets the door at the B pillar -The Aerocatch latches for the bonnet have locks but no keys, need new keys. -driver side door window is kind of gritty and could use a polish -damaged jacking rails and front frame rails, from people lifting the car the wrong way, might have this fixed by a bodyshop Electrical: -Nismo tachometer is just bouncing and displaying nonsense, supposedly worked fine when the stock ECU was still in the car -An old Greddy boost controller sits on the dash which will be removed as it servers no purpose anymore. -a led segment rpm gauge is on the steering column, will probably also be (re-)moved once the Nismo tacho is working correctly -there was an attempt to make the sound system better by the previous owner but it was just inducing noise all the time, ripped out the amp and filters in the back, no music for now -trunk antenna goes up as long as the radio is on regardless of the mode, I want it to only rise if I choose Radio specifically or per switch -3rd brake light is a bit dimmer than the taillights but everything was converted to LEDs so mabye now it just seems dimmer? -reverse light flickers, have to test if that behavior changes when I fiddle with the gear stick. Hope I can get around changing the switch. -Left side taillight, blinker section has minor water intake and is humid after washing. Other side has a hole in it, probably for that exact reason. I'll probably reseal them entirely and plug the holes. Engine: -minor coolant drips on one or the other hose -rear turbo leaks oil onto the exhaust making the car essentially undriveable due to fire hazard -Oil filter relocation kit has an oil drip at the Dash lines, will probably make a new connection there and tighten real good and pray -throttle body assembly is slightly stuck for the first throttle pedal input after sitting for a while I'm always open to suggestions and advice from more experienced people, I'm sure half of this list is easily dealt with and just requires some time and effort to sort out properly. Once I have some proper pictures of the car I will post some in this thread, I just have to remember to take some more once I get the chance to. Will post updates when I have news on anything, I want to try to keep this thread as kind of a logbook as well. Ultimately my goal for this car is to just enjoy it. An engine rebuild is probably going to happen sometime as well, because it is old after all. It will never be fully new again, I am just not that rich. But I want it to look good, work well and not rot away while I drive it. I'm probably gonna spend a lot of money on this journey, hopefully not an unreasonable amount.
×
×
  • Create New...