Jump to content
SAU Community

Relief In Sight For Aussie Importers, Car Enthusiasts Ect Ect


Recommended Posts

Japan exports drop 45% to new low!

http://news.bbc.co.uk/2/hi/asia-pacific/7909248.stm

Japan also had a trade deficit of 952.6 bn yen ($9.9bn; £6.8bn), the lowest figure since records began in 1979.

The demand for Japanese cars in particular dropped by 69%.

Demand for electronics and other goods has also slumped as global economies and consumer spending contract, pushing Japan deeper into recession.

I know this sounds bad, but with the Aussie dollar taking a wholloping over the last 5/4 months or so, this appears to be some relief in the short-middle term. If you understand how currency values fluctuate in the international market, you would see these export figures as a powerful and telling indicator that the Japanese Yen is likewise poised for an even greater fall.. So with less demand for Japanese products, also brings about in a depleation in demand for the Japanese currency, with a fall in demand also comes a drop in value. Therefore, if the value of the Japanese Yen is to drop, then even against our somewhat weaker Aussie dollar, imports from Japan (Electronics, Cars, Parts ect ect) should hence become cheaper for us once again! :D

*toot*

Edited by Marco-R34GTT

won't our dollar be low still as it was before, $1 AUD is still only buying 96 YEN whereas only a bit more than a year ago the AUD was buying as high 107 YEN?

someone please let me know, how will it look for exchange rates seeing as though Australia's economy is going okay where Japan's economy is going into recession?

won't our dollar be low still as it was before, $1 AUD is still only buying 96 YEN whereas only a bit more than a year ago the AUD was buying as high 107 YEN?

someone please let me know, how will it look for exchange rates seeing as though Australia's economy is going okay where Japan's economy is going into recession?

if you can get 96 yen for 1AUD, take it, then run!!!..

won't our dollar be low still as it was before, $1 AUD is still only buying 96 YEN whereas only a bit more than a year ago the AUD was buying as high 107 YEN?

someone please let me know, how will it look for exchange rates seeing as though Australia's economy is going okay where Japan's economy is going into recession?

Here is a good sight Andrew.

http://www.ozforex.com.au/

$1AUD is currently buying 63.5 Yen.

AUD vs JPY over the last 12 months:

http://www.chartflow.com/fx/historybasic.asp

Edited by Marco-R34GTT

japanese cakes rock my pants man

japanese.jpg

but srsly, with the whipping the australian dollar is getting at the moment, I dont think we can hope to see any real improvement, especially one that is going to be reflected in the price of parts, any time in the hear future. The price of cars is gonna takew a bit of a hit, but the truth is, even with the AU in freefall over the last 6 months, importing hasnt actually gone up in price anywhere near as much as you would expect, ergo we are already seeing the cost savings in that area.....

I think if the AUD/YEN it will still only be around high 60's - low 70's at very best for the moment 5 piont swing helps alot, the problem is though that the Japanese are buying alot of the 2nd hand stock and also new cars aren't selling, making it hard to buy good quality 2nd hand gear to send here - be interesting to see where it all ends up over the next six months.

Edited by OzCarImports

JAPANESE INDUSTRIAL OUTPUT PLUNGES!

Looks like our Japanese friends are in for some rough economic times.. This reiterates my point that a fall in the Yen should soon follow..

Here is some basic economic theory as to HOW this happens and what causes currencies to fluctuate on the international market..

http://en.wikipedia.org/wiki/Exchange_rate

JAPANESE INDUSTRIAL OUTPUT PLUNGES!

Looks like our Japanese friends are in for some rough economic times.. This reiterates my point that a fall in the Yen should soon follow..

Here is some basic economic theory as to HOW this happens and what causes currencies to fluctuate on the international market..

http://en.wikipedia.org/wiki/Exchange_rate

the fall in the yen (against USD) has already happened, down 8% for the week. However this isn't good news unless

you're american as it outlines that the ONLY safe place for money is now the USA, not switzerland, not Japan (and not australia).

So the aussie isn't going to shoot up anytime soon and it needs to, to make a dent on these import prices.

  • 2 weeks later...

The Yen is over valued as well though, I remember honda was calling for the japanese government to decrease the value of the yen or they were threatening to move offshore.

Hopefully we will see the yen come down in value which will offset the terrible AUD

Japan is a very large trade partner.

Japan's industry based on product supply from us = secodary and tertiary

Australia supplies primary product for this. Primary products attract the lowest value add.

If Japan gets a currency flogging so do we. It's not getting better anytime soon. There is still room for it to get worse.



  • Latest Posts

    • Price seems pretty good to me. Also seems a hell of a lot cheaper then buying another vehicle that only ever gets used for towing.  I'm a long way from you mate, I'm a couple of hours out of Brizzy. 
    • New [400]Z, they're available in manual and you don't have to worry about parts scarcity. 
    • Just planning to have the wiring neat and hide as much as possible.
    • The sodium acetate, mixed with citric acid, doesn't actually buffer each other. Interestingly though, if you used Sodium Acetate, and acetic acid, THAT becomes a buffer solution. Additionally, a weak acid that can attack a metal, is still a weak acid that can attack a metal. If you don't neutralise it, and wash it off, it's going to be able to keep attacking. It works the same way when battery acid dries, get that stuff somewhere, and then it gets wet, and off it goes again breaking things down. There's a reason why people prefer a weak acid, and it's because they want TIME to be able to be on their side. IE, DIY guys are happy to leave some mild steel in vinegar for 24 hours to get mill scale off. However, if you want to do it chemically in industry, you grab the muriatic acid. If you want to do it quicker at home, go for the acetic acid if you don't want muriatic around. At the end of the day, look at the above thumbnail, as it proves what I said in the earlier post, you can clean that fuel tank up all you want with the solution, but the rust that has now been removed was once the metal of the fuel tank. So how thin in spots is your fuel tank getting? If the magazine on the left, is the actual same magazine as on the right, you'll notice it even introduces more holes... Well, rust removal in general actually does that. The fuel tank isn't very thick. So, I'll state again, look to replace the tank, replace the fuel hanger, and pump, work out how the rust and shit is making it past the fuel filter, and getting into the injectors. That is the real problem. If the fuel filter were doing its job, the injectors wouldn't be blocked.
    • Despite having minimal clothing because of the hot weather right now, I did have rubber gloves and safety glasses on just in-case for most of the time. Yes, I was scrubbing with my gloves on before, but brushing with a brush removes the remaining rust. To neutralize, I was thinking distilled water and baking soda, or do you think that would be overkill?
×
×
  • Create New...