Jump to content
SAU Community

Recommended Posts

well its not a r33 or r34 motor its actully a r32 im very lucky to cum across this motor well i bought this motor 4 6k they said its got nismo turbos meatal head gasket and cams so i told them no worrys ill take it i bought about 6k of parts for it ecu,coil packs etc no internals as i was taking it all apart so i could paint it up at work i found adjustible cam gears thort cool as we were putting the timing belt kit on we noticed the crank was moving back and forth 3 to 4mm so i ordered big end bearing and conrod bearings wen we went to chang the bearing we took the sump off and found all the goodies forged pistons conrods r33 balanced crank and a grex oil pump the old bearing were nismo items so yea sounds a bit to good to be true but it happened

well its not a r33 or r34 motor its actully a r32 im very lucky to cum across this motor well i bought this motor 4 6k they said its got nismo turbos meatal head gasket and cams so i told them no worrys ill take it i bought about 6k of parts for it ecu,coil packs etc no internals as i was taking it all apart so i could paint it up at work i found adjustible cam gears thort cool as we were putting the timing belt kit on we noticed the crank was moving back and forth 3 to 4mm so i ordered big end bearing and conrod bearings wen we went to chang the bearing we took the sump off and found all the goodies forged pistons conrods r33 balanced crank and a grex oil pump the old bearing were nismo items so yea sounds a bit to good to be true but it happened

good stuff, thats what i ,meant by not throwing in a second hand engine in without checking it... its lucky you got a good engine to start wiv, my conversion cost so much coz ive got a fairly big engine setup, thats where it costs the most...

good result, mine is weeks away from completion and i cant wait to drive it...

same cant wait to take it down the strip and see wat i can get with street tyers hoping to get into the 12s and it left alice springs today so hopfully be at boost worx next week to get finished

1 more question will it be loud as i dont hav any cat mufflers or any thing its just stright pipe pretty much i no its illegal but in this town cops r pretty cool they dont mind it as long as u got good tyers and u dont act like a wanker in town they dont really care wat u got dun to ur car

i have to moove to your town... wonder if theyd pull u over for max boost gate open!!!

you should run 12s easy,maby 11's, i ran 13.0 in my old s14 with only 14 psi, exhaust and a clutch with bald tyres...

it probably would be loud but not massivly....

  • 1 month later...
  • 4 years later...

A mate did a similar conversion and I'm pretty sure he used these guys I've linked below; my mate basically sent the original RB25 loom across with the RB26 loom and the guys modified it and sent back the modified loom. They were super helpful and the car started first turn of the key. Didn't cost much either from memory.

http://www.sideshows.net.au/contact/

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
×
×
  • Create New...