Jump to content
SAU Community

26/30 Parts Have To Go!

richie$$$rich
 Share

Recommended Posts

richie$$$rich Contributor

richie$$$rich

Posted
Posted

Its a "I've had a GUT full sale" 26/30 Parts priced to go!

This is posted on other web sites. first in best dressed. Hello everyone,

As it states above. I'm F**Kn over this engine setup. All parts priced togo. New project is in the pipe line.

*GT42/T51r SPL rear 1200HP+ turbo INC MANIFOLD INC Wastegate INC screamer pipe also INC dump pipe $2800.00 the lot.

* RB26 Complete head INC Cam Gears,clear cam cover, 6 throttles and ARP head bolts. Just been reco'd by Robbie abbott engines and had 10 Hours of porting done. Priced to go $1800.00 (RECO & PORTING BILL WAS $1500)

*800cc Denso Injectors INC Rail (Dyno use only) $600.00

*Argo Rods (800hp+) and wisco forgies (8.5:1) $800.00 (Used F**k all)

*Haltech E11v2 INC wiring $1200.00

*2 Speed Powerglide with 3500convertor and Transbreak Built to hold 1200HP Plus B&M shifter INC tail shaft $3000.00

I've got other parts like RAJAB water pump pully ($100) , ROMAC harmonic balancer ($250) , Brand new RB30 Crank colla ($50)

* 3.5in EX system. with no cat and one muffler. ($300)

All parts are priced to get them the F**k out of my life! Going V8 turbo

PM me or call on 0418 787 314 on the Gold Coast. Postage can be arranged at buyers expense.

Link to comment
https://www.sau.com.au/forums/topic/259217-2630-parts-have-to-go/
Share on other sites
Swiper the Fox Grand Master

Swiper the Fox

Posted
Posted
Its a "I've had a GUT full sale" 26/30 Parts priced to go!

This is posted on other web sites. first in best dressed. Hello everyone,

As it states above. I'm F**Kn over this engine setup. All parts priced togo. New project is in the pipe line.

*GT42/T51r SPL rear 1200HP+ turbo INC MANIFOLD INC Wastegate INC screamer pipe also INC dump pipe $2800.00 the lot.

* RB26 Complete head INC Cam Gears,clear cam cover, 6 throttles and ARP head bolts. Just been reco'd by Robbie abbott engines and had 10 Hours of porting done. Priced to go $1800.00 (RECO & PORTING BILL WAS $1500)

*800cc Denso Injectors INC Rail (Dyno use only) $600.00

*Argo Rods (800hp+) and wisco forgies (8.5:1) $800.00 (Used F**k all)

*Haltech E11v2 INC wiring $1200.00

*2 Speed Powerglide with 3500convertor and Transbreak Built to hold 1200HP Plus B&M shifter INC tail shaft $3000.00

I've got other parts like RAJAB water pump pully ($100) , ROMAC harmonic balancer ($250) , Brand new RB30 Crank colla ($50)

* 3.5in EX system. with no cat and one muffler. ($300)

All parts are priced to get them the F**k out of my life! Going V8 turbo

PM me or call on 0418 787 314 on the Gold Coast. Postage can be arranged at buyers expense.

price on rods only.

polishstorm Mentor

polishstorm

Posted
Posted

Price on the whole bottom end of the RB30 including oil pump, water pump etc. Also who built the motor and was it a series two block used? did you also use a gates timing belt? has it all been modded with new tensioner tapped into block already to mate to the RB26 head.

richie$$$rich Contributor

richie$$$rich

Posted
  • Author
Posted
Price on the whole bottom end of the RB30 including oil pump, water pump etc. Also who built the motor and was it a series two block used? did you also use a gates timing belt? has it all been modded with new tensioner tapped into block already to mate to the RB26 head.

Update

Piston and Rods SOLD

Head and ECU SOLD

Oil Pump and crank colla SOLD

I have a re gound crank for sale now. $250

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • r32-25t
      Why am I hitting a power wall with my stroked RB25?

      By r32-25t · Posted

      When you say your cams are 272/262 is that 272in and 262ex?
    • Kinkstaah
      Nismo GT Pro LSD configurations

      By Kinkstaah · Posted

      We're arguing semantics. I am saying 45 accel and a 55 deccel ramp are "2 ways". Even a 45 degree ramp and an 89 degree ramp is "2 ways", because it is literally... two ways. The cusco 55/30 ramp is a 2 way. It's two ways. I get it though - in normal nomenclature a "2 way" would be 45/45 or 55/55 or 60/60 i.e the same locking in both directions. And something like 45/65 would be considered "1.5 way". I would then say if we're getting into the nitty gritty then every locking diff is a "2 way" diff and we should not speak in 1.5, or 2 ways but ramp angles instead. Which ofc if one of those ramp angles is 90deg, that side is not doing any locking. :p So Nismo don't obviously sell 3 things. The fact of the matter that they only sell two items really goes to show that there's a 2 way and a "1,5 way" which is really a 1 way. I believe the actual lockup for the 'adjustability' of the GT pro is really just setting preload for when the ramps actually start locking up. It's not changing how much 'wayness' there is. It is (somehow) horribly explained. People just buy whatever diff and go "locks up good bruh" and that's what ends up on socials forever.  
    • PranK
      New Skyline will be RWD and manual

      By PranK · Posted

    • GTSBoy
      Nismo GT Pro LSD configurations

      By GTSBoy · Posted

      No, you're wrong, and you've always been wrong about this. The Nismo has 2 sets of openings. One is a real 2-way, and the other is a 1-way. There is no 1.5-way possible with the ramps that they offer. A real 1.5-way does exist. That Cusco stuff I posted is a prime example. If the forward drive ramps are, say 55°, and the overrun ramps are, say, 30°, then you will get about half as much LSD effect on overrun than you do on drive. It is real, it realy works. OK, you're slightly right. The Nismo has 55° and 45° ramps on the 2-way, so it does offer less LSD effect on overrun. But, I think that just means that they've (probably) sensibly established that you do not want actually equal LSD effect on overrun. You just want "quite a lot, but not quite as much as the drive LSD effect".
    • DraftySquash
      Newbie from VIC

      By DraftySquash · Posted

      Just wanted to unearth this and post my baby with the new front ❤️😝 Took her to my wedding rehearsal today. Next up is getting wide skirts (after wedding)
×
×
  • Create New...