Jump to content
SAU Community

Recommended Posts

hey i know there are topics like this already but i just want to know whats the best wheels for drifting (r33 gtst).

ie. 17" by 9.5" off set??? tire size/brands front and rear sizes. dont care if i have to roll guards and shit like that. only want opinions from people that drift and know a thing or 2 about it. thanx guys

Link to comment
https://www.sau.com.au/forums/topic/259287-best-wheel-combo/
Share on other sites

17 X 8.5 and 17X9 or 9.5 would be a good set up, I ran that size and I found that the best tyres where BRIGESTONE RE55 semi slicks up front and what ever your budjet alows on the rear ( obviously dont put semi's on the rear ) alott has to do with what sort of power your car has because you dont realy want to hit the track with 10" wide rears and not enough power to get them spinning, DRIFTTEKS are good but you could hunt around for something like a forged SSR, WORK, VOLK/RAYS, BUDDY CLUB, or some thimg like that, as you will find a fully forged wheel heaps better for drift due to how much lighter they are. I can stress enough how important the semi slicks are in the equasion though they make a bloody huge difference and you will achive mad high speed entries with F all under steer if any.

thats my 2cents anyway.

off sets and spacers varrie heaps, from memorie I ran a conservitive +32 off set which isnt the toughest looking but I had bolt on spacers and I was on a budget at the time and got my ssr's cheap of a mate.

u have to understand that question is basically the same as asking "what turbo should i run"

without added details theres really no way we can answer it.

what tyres do u want to run, whats ur budget, do u want to stretch, do u want lightweight, are u willing to roll ur guards, do u want tough fitment etc etc

ok mate..

tyres- what do people recommend?

budget- im not gonna spend 3k on drift wheels but maybe half that or 2k max (not including tyres)

stretch- if thats whats best for drift and how much should you stretch em???

light weight- if it suits my budget

roll guards- already said i would in my first post!

tough fitment- again if it suits my budget

i'll throw one in you forgot to mention nisskid

power- 240rwks

yeh i would only need to know power if i was reccomending a tyre, not wheel. as far u wanting a reccomendation on tyre, thats a whole different ball game, once again depends on ur budget. in 17" u have a few common sizes, 235/45 probably being the most common around that size, 255/45 being the next more commonish size, not a lot bigger than that around in 17's. this is important for drift as ull be going through them pretty quickly.

if u went the 235's, id be going a 9.5", bit of stretch to keep the cheaper tyres sidewalls firm, but also lets u go up to a 255 comfortably if u choose to. offset of around +35 will make them sit comfortable, obviously the lower u go the tougher it will look, but the harder it will be to fit the tyres comfortably.

i run 5zigen 17 x 9.5 +22 all round. on the front i run brigestone potenza re55 semi slicks as well and swear by them. on the back i run 235/45/17 federal 595S but they are getting quite exxy in the cost, i found after trying out so many that these tyres suit me best. its sort of trial and error as to which tyre will best suit the way you like the car to feel.

alot of the cheap tyres delam quickly and feel like you are skating when doing fast transitions

also the federals are great in the wet awesome water dispersion.

yeah 33 gtr's are a fantastic wheel, there one of the lightest rims getting around especially in the price range, like i said and the other guys GO THE RE55's on the front they are one mean semi slick!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Edited by WHITE R33
not really.

you left off where I clearly stated "in that sort of price range" they weighed and trialed heaps of wheels on the new zealand gtr drag car owned by rece mcgreggor and he found them an extremely eficiant wheel, From memorie him gtr with the hydraulic lock set up in it went low 9s and I think high 8s in the end.

you left off where I clearly stated "in that sort of price range" they weighed and trialed heaps of wheels on the new zealand gtr drag car owned by rece mcgreggor and he found them an extremely eficiant wheel, From memorie him gtr with the hydraulic lock set up in it went low 9s and I think high 8s in the end.

yes and no, u said "especially", which meant including regardless of the price range. they are light, but not crazy light. my modenas weighed less in a 17x9.5, and my 17x9 works weighed less as well, both bought for between 1/5 and 1/3 of the price of GTR wheels.

they are a good wheel tho, def reccomend them.

yes and no, u said "especially", which meant including regardless of the price range. they are light, but not crazy light. my modenas weighed less in a 17x9.5, and my 17x9 works weighed less as well, both bought for between 1/5 and 1/3 of the price of GTR wheels.

they are a good wheel tho, def reccomend them.

verry true, agree with nisskid on that if you could dig up a cheap set of jap forged heels then do that for sure, but yeah i just meant the 33 gtr's are good on a budget.

good luck mate, get some pics up when u decide what your going with I ove 33 drift cops

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Have you done the Ignition Sync Wizard in the AEM software?
    • Find out what RPM it was idling at with the IACV unplugged. It's very weird that the rpm didn't change at all, and then it stalled. When it stalls is it nearly like a switch off, like you've turned the engine off? Or is it more stutters and sputters and coughs to death over a few seconds? Or does the RPM just slowly keep going down and down? Have you done a test of trying to start it with the AFM unplugged? Does it still die?     If you Follow Josh's advice on using Nistune to check the voltages (which is a perfect method!) if you see anything out of wack voltage wise, THEN get the multimeter out and read the voltage directly at the sensor. If the two vary, then you're now looking for a wiring issue vs a sensor issue. So be aware, what the ECU sees, may not be what the sensor is actually saying too...
    • You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
×
×
  • Create New...