Jump to content
SAU Community

Recommended Posts

Defi style boost guage with wiring just needs to run a vacuum line - $30

R32 gtst el dash lighting kit can be changed from blue to green - $30

does not light up the whole dash but looks good when lit

r32 gtr bov

can be used for r32,33,34 gtst and gtt - $50

Nismo short shifter came out of a 32 never used in my car was told couldnt fit???

maybe because it didnt have the 2 plastic pieces on the bottom and bounced around to much - $50

QFM K500 pads for r32 gtst

used for about 5000km have about 90% meat left

honestly the reason to sell is that they made my front rotors squeak to much when driving - $50 pair

good to have cheap pads though and they do brake very well

r32 gtst AAC valve

not sure how its working but ive cleaned it out powdercoated black - $15

Turbosmart boost T - $40

self explanitory

Drift catch can silver

all fittings and brackets - $50

Splitfire D1 ignition system

( its an earthing kit for coilpacks)

cant use cause i want my coilpack cover on

http://www.skylinesaustralia.com/forums/Sp...Di-t157059.html -$50

s14 non hicas powersteering pump and resivoir and bracket - $100

veilside rear bar for r32 gtst, brand new never fitted or used - $100

r32 4 door taillights in gc - $60 both

5mm spacers - $10

Parts are in Northern Melb

Pickup or postage extra on small items

pm or email me with any questions

pics up soon

Link to comment
https://www.sau.com.au/forums/topic/259391-cleaning-shed/
Share on other sites

bump

also found a set of front guard liners for r32 - $50 pair

and a set of springs from damper adjusted GAB shocks

the rear are stiffer than standard springs and the fronts stiffer and lower (these are blue rears are black) - $40 set

Link to comment
https://www.sau.com.au/forums/topic/259391-cleaning-shed/#findComment-4459714
Share on other sites

one last part a genuine veilside r32 front bar, came off a 32 gtr

is a 2 part bar and has the veilside stickers on the inside

bottom lip is broken in half and bar has some cracks but fixable - $70

Link to comment
https://www.sau.com.au/forums/topic/259391-cleaning-shed/#findComment-4461362
Share on other sites

Defi style boost guage with wiring just needs to run a vacuum line - $30

QFM K500 pads for r32 gtst

used for about 5000km have about 90% meat left

honestly the reason to sell is that they made my front rotors squeak to much when driving - $50 pair

good to have cheap pads though and they do brake very well

r32 gtst AAC valve

not sure how its working but ive cleaned it out powdercoated black - $15

Turbosmart boost T - $40

self explanitory

Splitfire D1 ignition system

( its an earthing kit for coilpacks)

cant use cause i want my coilpack cover on

http://www.skylinesaustralia.com/forums/Sp...Di-t157059.html -$50

s14 non hicas powersteering pump and resivoir and bracket - $100

veilside rear bar for r32 gtst, brand new never fitted or used - $100

r32 4 door taillights in gc - $60 both

5mm spacers - $10

set of front guard liners for r32 - $50 pair

and a set of springs from damper adjusted GAB shocks

the rear are stiffer than standard springs and the fronts stiffer and lower (these are blue rears are black) - $40 set

one last part a genuine veilside r32 front bar, came off a 32 gtr

is a 2 part bar and has the veilside stickers on the inside

bottom lip is broken in half and bar has some cracks but fixable - $70

still all for sale

need cash for clutch fund :D

edit: also have a kenwood sub in box made for r32 boots (low level box) with DUB monoblock amp for $400

about 3 weeks old

Link to comment
https://www.sau.com.au/forums/topic/259391-cleaning-shed/#findComment-4484548
Share on other sites

  • 5 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...