Jump to content
SAU Community

Recommended Posts

hey guys, was at a mates house today and decided to put in a manual boost controller, went for a drive, put my foot into it just a little, it spiked... so i pulled over, wound it down... got back in the car, cruised for about 2 minutes then got onto a straight bit of road and gave it another squirt... it almost choked up, coughing and spluttering and so on, took my foot off... when i went to put my foot down again, i hear a noise like a siren, i look around only to find the sound is coming from my car... so now i cant make boost, no matter how hard my foot is on the accelerator, it sounds like its coming from the inside the pod filter... so i go back to my mates house and pull it apart, all the way down to the turbo blades, checked it and nothing caught in there or any of the piping, put it all together again but still making the noise... i took the boost controller off but still it makes the same noise...

SO... was just wondering if any of you guys have ever had this issue or know what it is at all... just lost my job two days ago so cant really afford to go and get another one... any help would be greatly appreciated...

Cheers

Guy

Edited by SCR34M
Link to comment
https://www.sau.com.au/forums/topic/260701-turbo-whine/
Share on other sites

maybe, was a bit dark to finish the elimination process... so tomorrow morning ill check piping and all... spoke to hyperdrive and they reckon might be a leak on the manifold or exhaust somewhere... not sure, but the noise is really loud, like almost copper siren loud... just odd!

Link to comment
https://www.sau.com.au/forums/topic/260701-turbo-whine/#findComment-4472272
Share on other sites

Be careful. If its the bearing then the turbo will be spinning out of alignment. Hence the fins are spinning into the housing. Slowly feeding ur engine small metal filings. Did the boost gauge move to like 10psi? or nothing? Blow IC piping = no + boost

Link to comment
https://www.sau.com.au/forums/topic/260701-turbo-whine/#findComment-4472324
Share on other sites

Be careful. If its the bearing then the turbo will be spinning out of alignment. Hence the fins are spinning into the housing. Slowly feeding ur engine small metal filings. Did the boost gauge move to like 10psi? or nothing? Blow IC piping = no + boost

yeah it did before it stopped... now it just sits on 0... wont go past it

If it was blown turbo, wouldnt there be smoke?

Edited by SCR34M
Link to comment
https://www.sau.com.au/forums/topic/260701-turbo-whine/#findComment-4472331
Share on other sites

blown turbo.

same thing happend to mine, really loud whistle and car wouldn't go anywhere

took it off to find a lot of the intake side wheel not there and the shaft was making a lovely clunking sound when i tried to spin it with my fingers

Edited by inthisglass
Link to comment
https://www.sau.com.au/forums/topic/260701-turbo-whine/#findComment-4472336
Share on other sites

blown turbo.

same thing happend to mine, really loud whistle and car wouldn't go anywhere

took it off to find a lot of the intake side wheel not there and the shaft was making a lovely clunking sound when i tried to spin it with my fingers

shit, in that case, anyone got a turbo they wanna sell?...

Link to comment
https://www.sau.com.au/forums/topic/260701-turbo-whine/#findComment-4472360
Share on other sites

ohh yeahh man thats wats goin on with my r33 atm .. no boost at all .. chekd my cooler and nothing there ,...i took it to a guy i know and the told me its the turbo .. there is no smoke out the zorst but they still think its the turbo ... i hav no boost at all and it sounds like in getting a shitty air sound....

i have to take it it 1 morre tym for them to pull the turbo out and make sure that it is the turbo...

good luck with urs man ... fkn suks to hav no boost ayy :)

Link to comment
https://www.sau.com.au/forums/topic/260701-turbo-whine/#findComment-4473023
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
×
×
  • Create New...