Jump to content
SAU Community

Recommended Posts

hey guys, was at a mates house today and decided to put in a manual boost controller, went for a drive, put my foot into it just a little, it spiked... so i pulled over, wound it down... got back in the car, cruised for about 2 minutes then got onto a straight bit of road and gave it another squirt... it almost choked up, coughing and spluttering and so on, took my foot off... when i went to put my foot down again, i hear a noise like a siren, i look around only to find the sound is coming from my car... so now i cant make boost, no matter how hard my foot is on the accelerator, it sounds like its coming from the inside the pod filter... so i go back to my mates house and pull it apart, all the way down to the turbo blades, checked it and nothing caught in there or any of the piping, put it all together again but still making the noise... i took the boost controller off but still it makes the same noise...

SO... was just wondering if any of you guys have ever had this issue or know what it is at all... just lost my job two days ago so cant really afford to go and get another one... any help would be greatly appreciated...

Cheers

Guy

Edited by SCR34M
Link to comment
https://www.sau.com.au/forums/topic/260701-turbo-whine/
Share on other sites

maybe, was a bit dark to finish the elimination process... so tomorrow morning ill check piping and all... spoke to hyperdrive and they reckon might be a leak on the manifold or exhaust somewhere... not sure, but the noise is really loud, like almost copper siren loud... just odd!

Link to comment
https://www.sau.com.au/forums/topic/260701-turbo-whine/#findComment-4472272
Share on other sites

Be careful. If its the bearing then the turbo will be spinning out of alignment. Hence the fins are spinning into the housing. Slowly feeding ur engine small metal filings. Did the boost gauge move to like 10psi? or nothing? Blow IC piping = no + boost

Link to comment
https://www.sau.com.au/forums/topic/260701-turbo-whine/#findComment-4472324
Share on other sites

Be careful. If its the bearing then the turbo will be spinning out of alignment. Hence the fins are spinning into the housing. Slowly feeding ur engine small metal filings. Did the boost gauge move to like 10psi? or nothing? Blow IC piping = no + boost

yeah it did before it stopped... now it just sits on 0... wont go past it

If it was blown turbo, wouldnt there be smoke?

Edited by SCR34M
Link to comment
https://www.sau.com.au/forums/topic/260701-turbo-whine/#findComment-4472331
Share on other sites

blown turbo.

same thing happend to mine, really loud whistle and car wouldn't go anywhere

took it off to find a lot of the intake side wheel not there and the shaft was making a lovely clunking sound when i tried to spin it with my fingers

Edited by inthisglass
Link to comment
https://www.sau.com.au/forums/topic/260701-turbo-whine/#findComment-4472336
Share on other sites

blown turbo.

same thing happend to mine, really loud whistle and car wouldn't go anywhere

took it off to find a lot of the intake side wheel not there and the shaft was making a lovely clunking sound when i tried to spin it with my fingers

shit, in that case, anyone got a turbo they wanna sell?...

Link to comment
https://www.sau.com.au/forums/topic/260701-turbo-whine/#findComment-4472360
Share on other sites

ohh yeahh man thats wats goin on with my r33 atm .. no boost at all .. chekd my cooler and nothing there ,...i took it to a guy i know and the told me its the turbo .. there is no smoke out the zorst but they still think its the turbo ... i hav no boost at all and it sounds like in getting a shitty air sound....

i have to take it it 1 morre tym for them to pull the turbo out and make sure that it is the turbo...

good luck with urs man ... fkn suks to hav no boost ayy :)

Link to comment
https://www.sau.com.au/forums/topic/260701-turbo-whine/#findComment-4473023
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...