Jump to content
SAU Community

Recommended Posts

up for sale i have,

set of 6 440cc r34 gtr injectors which have been cleaned at flow tested at "injection correction" in hornsby approx 3 months ago and since then have not been fitted and are still in packaging.

good for rb20 or rb26 for a little over 300rwkw

cost me $300 to buy injectors

+

$170 to clean and flow injectors flowed at 440cc

only asking $300+delivery but prefer pick up in sydney. reason for selling is that i bought a r34 and sold the r32.

also for sale is a front bar off a r32 skyline plus a side skirt for passenger and rear pods for rear bottom quarters.

front bar has been modified to accept front mount intercooler and side skirt has a crack in it.

otherwise could do with paint if your real picky...rear pods are in good condition.

pick up only in sydney.

side pods $50

side skirt $20

front bar $50

or all of them for $100.

also for sale rb20det turbo from r32 93 model 80,000k's never boosted other then standard in immaculate condition without a spot of blowby or bearing movement with inlet flange, water lines, oil bolt, oil dump.

$180+postage or pick up preffered.

r34 gtr fuel pump with fuel sensor etc

came off gtr with 30,000k's in great condition good for little over 300rwkw

$100+postage or pick up preffered

also r32 gtst factory alloy wheels 16" with 90-95% tread only has minor gutter rash on "one" wheel barely noticable came off 80,000k car in top condition in as new "intenza sava" 225/50/16 tyres cost me $150 each.

tyres alone cost me $600

price: $350 for wheels and tryes, pick up only sydney

rb20det standard air filter box

great condition with brand new air filter panel..just needs external metal clips which you can source for a buck or two from a wreckers.

price:$25.00 ono

rb25,rb20det head covers a bit greasy but nothing degreaser couldnt clean up as new...

$50 pick up only.

prices are cheap as they are so no low ballers all parts are genuine and as described so 1st in with money best in.

"parts will be on ebay in a week if not picked up on here"

parts located in sydneys west

contact me via pm or on 0424266986

happy shopping.

post-39384-1237024315_thumb.jpg

post-39384-1237024369_thumb.jpg

post-39384-1237024622_thumb.jpg

post-39384-1237024708_thumb.jpg

post-39384-1237024762_thumb.jpg

post-39384-1237024833_thumb.jpg

post-39384-1237024902_thumb.jpg

post-39384-1237024957_thumb.jpg

post-39384-1237025004_thumb.jpg

post-39384-1237025071_thumb.jpg

post-39384-1237025185_thumb.jpg

side skirts and pods for 2door or 4 door

from what im aware pods can be used on either 2 or 4 door.

but either way these are from a 2 door.

hi mate

thinking of geting your turbo but what else do i have to do? extra work like tuning any ideas? cause my car has got a boost gauge of i think 10 psi

the turbo is still for sale, i know its in great condition and will take 10 psi without any issues.

pm me if interested.

up for sale i have,

set of 6 440cc r34 gtr injectors which have been cleaned at flow tested at "injection correction" in hornsby approx 3 months ago and since then have not been fitted and are still in packaging.

good for rb20 or rb26 for a little over 300rwkw

cost me $300 to buy injectors

+

$170 to clean and flow injectors flowed at 440cc

only asking $300+delivery but prefer pick up in sydney. reason for selling is that i bought a r34 and sold the r32.

also for sale is a front bar off a r32 skyline plus a side skirt for passenger and rear pods for rear bottom quarters.

front bar has been modified to accept front mount intercooler and side skirt has a crack in it.

otherwise could do with paint if your real picky...rear pods are in good condition.

pick up only in sydney.

side pods $50

side skirt $20

front bar $50

or all of them for $100.

also for sale rb20det turbo from r32 93 model 80,000k's never boosted other then standard in immaculate condition without a spot of blowby or bearing movement with inlet flange, water lines, oil bolt, oil dump.

$180+postage or pick up preffered.

r34 gtr fuel pump with fuel sensor etc

came off gtr with 30,000k's in great condition good for little over 300rwkw

$100+postage or pick up preffered

also r32 gtst factory alloy wheels 16" with 90-95% tread only has minor gutter rash on "one" wheel barely noticable came off 80,000k car in top condition in as new "intenza sava" 225/50/16 tyres cost me $150 each.

tyres alone cost me $600

price: $350 for wheels and tryes, pick up only sydney

rb20det standard air filter box

great condition with brand new air filter panel..just needs external metal clips which you can source for a buck or two from a wreckers.

price:$25.00 ono

rb25,rb20det head covers a bit greasy but nothing degreaser couldnt clean up as new...

$50 pick up only.

prices are cheap as they are so no low ballers all parts are genuine and as described so 1st in with money best in.

"parts will be on ebay in a week if not picked up on here"

parts located in sydneys west

contact me via pm or on 0424266986

happy shopping.

actually my number is 0424266984

injectors sold, pods sold (pending payment), fuel pump sold, wheels sold, turbo sold, cam covers sold.

still for sale, $25 front bar, $15 passenger side skirt, $20 standard r32 air filter box with air filter. all items pick up only

from syd, 2197.

  • 5 weeks later...
injectors sold, pods sold (pending payment), fuel pump sold, wheels sold, turbo sold, cam covers sold.

still for sale, $25 front bar, $15 passenger side skirt, $20 standard r32 air filter box with air filter. all items pick up only

from syd, 2197.

only these items left...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • No. GKTech arms have spherical bearings in them. No bushes. You will not need bushes for those arms. The sphericals are a bit of a maintenance nightmare. I have replaced all of mine several times in the 5 or so years I've had them, and I have the arms out regularly to clean and lube the balls. Worth the pain on an R32, because the standard arm design is trash. If you need the camber adjustment, there are other options (than the GKTech ones), although I would still lean towards and prefer the GKTech ones, even with the maintenance load of the sphericals. The caster adjustment is also highly valuable, allowing for setting the car up to drive straight. There are a million options for these, including the GKTech ones. I've had Tein rods on mine for 20 years and the balls are much less trouble in that location. Never given me a moment's pain. All positives, no negatives. I consider them compulsory.
    • Lol yeah I ordered the clips mentioned and as far as the amayama diagrams go i think thats all I'll need. Fogured id ask, sometimes people's first hand experience doesnt always match up to diagrams haha, i guess I'll wing it and worse comes to worse I'll just deal with it as I go
    • Thanks for all that information I appreciate it. To answer your questions: - Yep that's what I mean. These guys are professional painters to so I must be missing something. It's a bit hard to explain. - With the primer landing on clearcoat, I make sure that the surrounding clearcoat is scuffed to 240 grit as my epoxy primer says that I only need to sand the area to 240 grit. - Yeah so similar to the first question, assuming that the paint landed on the unscuffed clearcoat because I've seen that happen. - Yep I want to prep the surface in that order. Only reason because epoxy primer will protect it from rust and I need that atm with this crappy Sydney weather. I think I was worried about time, if I try to put the filler down but screw it up somehow and I don't have time to sand it off and reapply it then need to put primer later that it might start to rust again so I wanted to apply the primer as quick as possible to not deal with rust.  - I just deleted some answers, I just realised after watching a video and what you said about looking at the data sheet, that I need to read the data sheet on the specific filler I'm using. It's possible now that I put epoxy primer first was a waste of time and need to go to bare metal lol
    • I did. I went to a suspension guy and he told me because I don't have adjustable camber arms it's the reason why my car veers towards the left if I take my hands off the wheel but if I drive my other every day car and take my hands off the steering wheel it goes completely straight. I think it's common with Skyline's. In order to fix the problem, I likely need gktech camber arms then nismo bushes since I have poly bushes atm, then a wheel alignment after that. With my car if I take my hands off the steering wheel on a really bumpy road before stopping at a light I have to hold my steering wheel somewhat tight otherwise my car will legit just go completely in the other direction quite quickly and I'll slam into something lol instead of stopping straight. I Believe this YouTuber had the same issue and fixed it with gktech arms. At timestmap 6:05 he talks about how the car doesn't veer anymore after installing these arms.  
    • hello! does anyone have a schematic that shows how to test the blower motor resistor for the vac system? i believe the part# is 27761-15U00. I think the resistor is toast, but would like to be able to test it somehow before i embark on the journey to find a new one. cheers! 27761-15U00
×
×
  • Create New...