Jump to content
SAU Community

Recommended Posts

Hey guys,

I was thinkin of gettin these tailight overlays for the v35 from bluetbatmobile in the states..

post-11043-1237117367_thumb.jpg

But I'm concerned about road laws regarding taillights etc in nsw.. I plan to get cutouts for the lights, indicators, reverse lights, and reflectors so that theyre still clear, jus the rest of the taillight smoked.. and the leds.. I don't wanna get defected or have insurance turn down a claim cause of these.. My understanding though is that as long as the lights and reflectors are not covered you're in the clear? Does anybody know exactly?

Cheers,

Link to comment
https://www.sau.com.au/forums/topic/261264-overlays/
Share on other sites

Hate to break it to you mate, anything changed after certification is a defect.

Plain and simple.

The only thing, within reason, is the exhaust.

As for a cop defecting you, probably not, as for the insurance company.... probably not.

Realistically you could remove the film before it gets sent to the repairer.... and if the guy that hits you doesn't know any better - no biggie....

Of course, this would be insurance fraud - legally you're obligated to notify the insurer of any modifications to the vehicle.

In saying that, i attach some photos from my old Mitsubishi Mirage, i drove around with these tints for over 1 year - got defected once, and it still passed pink slip, twice.

post-59558-1237119715_thumb.jpg

post-59558-1237119737_thumb.jpg

post-59558-1237119758_thumb.jpg

post-59558-1237119972_thumb.jpg

Edited by g33k
Link to comment
https://www.sau.com.au/forums/topic/261264-overlays/#findComment-4479253
Share on other sites

yeh realistically i doubt that itll cause a problem.. n ok anything after certification is a defect.. im not so much concerned about that though.... that point aside would they be technically illlegal? I just want the comfort of knowing that if i get any shit for em I can argue they arent technically illegal... as you know law is a funny business .. maybe its time i read through the big book of traffic law again hehe :banana:

Edited by mjay
Link to comment
https://www.sau.com.au/forums/topic/261264-overlays/#findComment-4479302
Share on other sites

Hate to break it to you mate, anything changed after certification is a defect.

Plain and simple.

The only thing, within reason, is the exhaust.

incorrect.

these is nothing illegal about those lights, no light is affected or dimmed, it just darkens the surrounding areas.

if that were true, black surround altezza lights would be illegal, which is not the case.

Link to comment
https://www.sau.com.au/forums/topic/261264-overlays/#findComment-4479330
Share on other sites

actually ANY modification to ANY car, from factory, is technically illegal without an engineers certificate.

there ARE some owner certifiable modifications, but i rekon this one isnt. but how many people tint their rear lights? my S13 did! people do this stuff all the time, if you mod your car eventually youll get caught or it will bite you in the ass. its a risk we all take!!

Link to comment
https://www.sau.com.au/forums/topic/261264-overlays/#findComment-4479385
Share on other sites

actually ANY modification to ANY car, from factory, is technically illegal without an engineers certificate.

there ARE some owner certifiable modifications, but i rekon this one isnt. but how many people tint their rear lights? my S13 did! people do this stuff all the time, if you mod your car eventually youll get caught or it will bite you in the ass. its a risk we all take!!

go read the ADR's, there are some mod's that do not require engineers certification.

Link to comment
https://www.sau.com.au/forums/topic/261264-overlays/#findComment-4479395
Share on other sites

Well, this should settle it.

I just called RTA inspection bay (the place that do certifications to let you back on the road after a defect) - in NSW. Not sure about the equiv in VIC Roads.

They advise that any modification that hinders the visibilty of any light, is considered a defect and will not pass.

I even asked if you change the down light on the license plate to a different colour.

It actually has to be white.

So sorry my friend, you're out of luck, yes its a defect. It's not illegal to do, but it is to drive on NSW roads as its defective, hence making it illegal.

I agree, some modifications are OK, without engineers cert, i.e. Tyres up or down an inch.

Link to comment
https://www.sau.com.au/forums/topic/261264-overlays/#findComment-4479554
Share on other sites

Well, this should settle it.

I just called RTA inspection bay (the place that do certifications to let you back on the road after a defect) - in NSW. Not sure about the equiv in VIC Roads.

They advise that any modification that hinders the visibilty of any light, is considered a defect and will not pass.

I even asked if you change the down light on the license plate to a different colour.

It actually has to be white.

So sorry my friend, you're out of luck, yes its a defect. It's not illegal to do, but it is to drive on NSW roads as its defective, hence making it illegal.

I agree, some modifications are OK, without engineers cert, i.e. Tyres up or down an inch.

Fantastic so considering that the visibility of the lights are in fact not hindered in any way since only the surroundings are covered then these should be fine... Hmmm Except if i cover the LEDs they may argue back on that.. Might have to have cutouts for them too.. :D

Thanks for calling them up by the way :blink:

Link to comment
https://www.sau.com.au/forums/topic/261264-overlays/#findComment-4479866
Share on other sites

i have these on my tail lights and you can see them when you step on the brake pedal just as good as if they where not on

even with the lights on

ive had mine for about 8mths now had police behind me and had no probs they look better than the pink lens i have pics on here somewhere

think its under clear front bar lenses

Link to comment
https://www.sau.com.au/forums/topic/261264-overlays/#findComment-4480517
Share on other sites

Police may not stop you.. but the serious problem is that if the insurance company deny your claim, due to THEIR decision that the overlay hindered other people's view from behind, you are dead. Your word over theirs?

It is not likely u gonna go and conduct a 'scientific' test, in order to fight in the court?

tat's why i didnt buy it, even if i love to have it..

Link to comment
https://www.sau.com.au/forums/topic/261264-overlays/#findComment-4481148
Share on other sites

i have these on my tail lights and you can see them when you step on the brake pedal just as good as if they where not on

even with the lights on

ive had mine for about 8mths now had police behind me and had no probs they look better than the pink lens i have pics on here somewhere

think its under clear front bar lenses

Can you post a pic, cant find anything in search...

Police may not stop you.. but the serious problem is that if the insurance company deny your claim, due to THEIR decision that the overlay hindered other people's view from behind, you are dead. Your word over theirs?

It is not likely u gonna go and conduct a 'scientific' test, in order to fight in the court?

tat's why i didnt buy it, even if i love to have it..

Yeh that's exactly the concern I have, not the police but insurance, but if the law states that it's only illegal if the visibilty of the light is affected, then it's fair to say that with cutouts visibility is not affected... As we all know in law it's not what you say but how you say it..

Link to comment
https://www.sau.com.au/forums/topic/261264-overlays/#findComment-4481189
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Power steering is probably because someone has nuked the HICAS CU and you no longer have the variable power asist doing what it is supposed to. How much boost are you running? You are aware that any more than 10 psi on the stock ECU is just asking for it to go to full R&R (that's Rich & Retard, which is effectively Retarded and Retarded!) which kills all the power. Depending on the exact conditions, it can just be runnign on the fat and stupid end of the maps, then the conditions change, you make a little more boost and the ECU goes into panic.
    • @BuiltNotBought Just as GTSboy said.   If you want driveabilty and more low down torque..keep the stock runners. They are VERY good from a factory. I have them too on my RB25DET NEO and as a GTSboy i have fmic but with stock piping route(i have Blitz intercooler) Iam making around 320 BHP and the car pulls "hard" from like 2,5k all the way to 7k. I have it dyno tuned to mimic N/A power curve and making little less max torque due to the smallbox tranny. But driveability is very great. I had 350Nm below 3k so car feels very quick.   EDIT:  Not my channel but i saw this and i know that is what i want (and i have exactly this)  
    • Looking to sort out a couple of issues on my skyline  It recently was rebuilt, however rebuilder long story short did not give two flying effs about the work he did. So moving forward it's running but I have two persistent issues 1) it has a misfire / lag type of issue (was at higher RPMs but I had a dead piggy back ecu removed which improved it) now it's not as bad but still does it at random, I thought it may have been a boost issue I'm running an older turbosmart dual stage controller, turbosmart told me to try running off gate pressure however it still has a lag at random times. It has New MAF, maf plug, coil packs, sparks, CP harness.. injectors tested and cleaned. Factory ECU. 2) Power steering issue. It is tight as anything. Flushed power steering, rebuilt my pump because the bearing was shot. Flushed again still tight (mainly when parking and going slow into my driveway etc)  No kinks in hard lines, replaced the lines I could see had cracks. Still tough to steer.  I was told to shim a coin and place into the solenoid plug? Is there anything else. My steering angle sensor also has a issue. It's a used one I replaced, does it need to be calibrated? I feel like I've tried everything and this car is my voodoo doll.   
    • Holy shit... wow!!! I totally missed this
    • One main filter. Each tank has a prefilter to keep rocks and small children out, then the big main filter that also does water separation. Clogged the first one so bad it was like a rev limiter at 3200rpm. Literally just like dropping the throttle off and maintaining rpm!
×
×
  • Create New...