Jump to content
SAU Community

Inner West Crew Whoretown (toowong/st Lucia/kenmore/indooroopilly And Sometimes Sunnybank?)


Recommended Posts

Mine are good compared to driving with parkers on. That's about it lol.

niggah prease. I could see just fine with your lights on, and my lights OFF.

Don't expect to hear from him till monday night

Yeah I know, but was leaving it there for him to find. Turns out there's no such thing as a filter and ERD Dan thought I was on drugs. Quick phone call later he thinks my abs has raped my 4WD. Need to check sensors.

300HP out of the 20 should be pretty easy. Will only stop my nightmares if I don't ever have to do any work on the Z32.

Suggestions for reaching power target? I did so much research on VGs that now I don't know what to do with my RB.

NO work on it? What if it needs a bangin' stereo? :(

Who's Michelle?

Someone Tristan and I have both worked with

What toys?

These squeaky toys :P:D

SNC01214.jpg

yo

i got rid of my original lights (inc bulbs.) when i bought the blue ones

the bulbs in the original ones were those bluey ones they sell at repco for stupid expensive prices (for what they are)

my new bulbs are 100w ones (stock is 60w) - they are sexy, overnight parts from hongkong lol

@p.s. - yeh sure

@p.p.s. - yeeh had to dog - needed to pick up copper nut, and that involved a trip to manly lol

Think mine were hungee wottas too from memory. Probably using the same (or close to) what I used to have.

sweet :rofl:

what was Colin doing at Manly? :P

Edited by Isola

soooo......

Avatar is a complete piece of boring ass shit. Only good thing about it was getting to see that silly mole Michelle Rodriguez die again. Predictable rehashed phone in hack of a movie.

How do I go about getting back the 2hs 41mins of my life? Does anyone have a flux capacitor?

euro disney epic fail

waste of $140 in entry fees. in terms of rides, movie world or dreamworld rate higher

anyways, it's 1:30 am, and i gots to be up at 5am for our flight to new york. shall have a look for a mets hat once there.

will have net at the hotel in ny, so shall annoy you farkers some more

peace out

soooo......

Avatar is a complete piece of boring ass shit. Only good thing about it was getting to see that silly mole Michelle Rodriguez die again. Predictable rehashed phone in hack of a movie.

How do I go about getting back the 2hs 41mins of my life? Does anyone have a flux capacitor?

So glad I refused to ever watch a 3D movie about blue fairies, I'm going to use that 2h:41 and put it to good use....drinking

@ Andy:

What was the name of that RB management system that you were raving about a while ago that allows you to run without AFMs? Could I use it on my 20? And will it handle what I just said to Colin & Martin?

Adaptronic, though they are better for 4cyl applications as the e420c only has enough drivers to run a 4cyl in sequential spark. they have a e1280s now but i think it is around the same price as a vipec ect, the main advantage of a e420c was the pirce. it you are happy to run wasterd spark though the e420c is still a really really good computer, my old r33 is running happily on one

shall have a look for a mets hat once there.

Thanks :(

So glad I refused to ever watch a 3D movie about blue fairies, I'm going to use that 2h:41 and put it to good use....drinking

Yeah, I would never have watched it if the GF hadn't. I got bored a few times and went off to make coffee and things, so it probably doesn't owe me the full 2:41, but pretty close :)

Adaptronic, though they are better for 4cyl applications as the e420c only has enough drivers to run a 4cyl in sequential spark. they have a e1280s now but i think it is around the same price as a vipec ect, the main advantage of a e420c was the pirce. it you are happy to run wasterd spark though the e420c is still a really really good computer, my old r33 is running happily on one

Thanks Andy. Don't know why I thought it was an RB one. I'll keep on the hunt :)

Thanks :(

Yeah, I would never have watched it if the GF hadn't. I got bored a few times and went off to make coffee and things, so it probably doesn't owe me the full 2:41, but pretty close :)

Thanks Andy. Don't know why I thought it was an RB one. I'll keep on the hunt :)

vipec ftw

Cheers - I'll read up on them :)

btw - does anyone know how much mines ECUs go for for the 32? I got a dude wanting me to make him an offer on his, and I have NFI how much to say...

0$ they are for jap fuel and are really only useful to get rid of the speed limiter

Is that really the only benefit from it? What if it's mapped for Aus fuel?

you cant remap them, the eprom is covered in about 3 inches of epoxy so it cant be swapped out, the benefit is that on jap fuel they give you slightly better fuel and ignition maps and move the rev limiter and speed cut and the richen and retard part of the standatd ecu. But in Aus all it does is make the car run lean.

you cant remap them, the eprom is covered in about 3 inches of epoxy so it cant be swapped out, the benefit is that on jap fuel they give you slightly better fuel and ignition maps and move the rev limiter and speed cut and the richen and retard part of the standatd ecu. But in Aus all it does is make the car run lean.

ok cool, thanks again :)

I'm reading up on Vipecs, but it's making my brain hurt. So much info!!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • I said Garrett style. Not Garrett genuine. And something in the G30 550 range is what you want. Not those pokey little old fashioned T28 sized things. The intake ports in the head are small. There is little benefit in fattening up the runners and leaving ths actual ports small. Just run what you've got. And on the subject of Nistune vs Haltech etc..... You know you can control the transmission with decent standalone ECUs these days, right? No need to keep any of that old Nissan bullshit. Don't get me wrong - I use Nistune on my Neo. But it is a DET, so the number of bodges and workarounds I had to do to make it work in a chassis without ABS, TCS, etc, is quite small compared to the herniated arsehole you will have trying to make it work on a motor that doesn't have some of the things that the turbo ECU wants to see. Just easier to bite the bullet and go aftermarket outright.      
    • Hmm. Only when the f**king thing is actually working. Still can't find the leak. And that's with dye being put in the last 3 times!
    • Ok so will run the piping over that radiator and no plenum it is. Put that money towards a Haltech and see what suits. Any ideas something like an elite 2000 or 2500 right? My long term goal is 300kw e85 and manual swap and that’s a dream come true. For now will be 200kw and auto the stock rb25det neo intake isn’t too expensive with throttle body. If I was to have the port matching done, Would that be better than the stock de intake as the det has bigger holes plus has the spots for sensors etc? And suit more long term?  appreciate the advice?   
    • You understand AFR is not the only thing that contributes to it pinging yeah? Funnily, what the AFR gauge will tell you when it likely is pinging, is going to make you think things are really safe and good.
×
×
  • Create New...