Jump to content
SAU Community

Inner West Crew Whoretown (toowong/st Lucia/kenmore/indooroopilly And Sometimes Sunnybank?)

funkymonkey

By funkymonkey,
in Queensland

 Share

Recommended Posts

Isola Grand Master

Isola

Posted
Posted (edited)
Mine are good compared to driving with parkers on. That's about it lol.

niggah prease. I could see just fine with your lights on, and my lights OFF.

Don't expect to hear from him till monday night

Yeah I know, but was leaving it there for him to find. Turns out there's no such thing as a filter and ERD Dan thought I was on drugs. Quick phone call later he thinks my abs has raped my 4WD. Need to check sensors.

300HP out of the 20 should be pretty easy. Will only stop my nightmares if I don't ever have to do any work on the Z32.

Suggestions for reaching power target? I did so much research on VGs that now I don't know what to do with my RB.

NO work on it? What if it needs a bangin' stereo? :(

Who's Michelle?

Someone Tristan and I have both worked with

What toys?

These squeaky toys :P:D

SNC01214.jpg

yo

i got rid of my original lights (inc bulbs.) when i bought the blue ones

the bulbs in the original ones were those bluey ones they sell at repco for stupid expensive prices (for what they are)

my new bulbs are 100w ones (stock is 60w) - they are sexy, overnight parts from hongkong lol

@p.s. - yeh sure

@p.p.s. - yeeh had to dog - needed to pick up copper nut, and that involved a trip to manly lol

Think mine were hungee wottas too from memory. Probably using the same (or close to) what I used to have.

sweet :rofl:

what was Colin doing at Manly? :P

Edited by Isola
  • Replies 37.7k
  • Created
  • Last Reply

Top Posters In This Topic

  • Smity42

    6056

  • Isola

    4161

  • astrotristan

    3047

  • Beelzebub89

    2843

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

FineLine
FineLine

Are you allowed to drive a turb on p plates. ?

FineLine
FineLine

They do indeed mate. doesnt matter where you live these days, if its a line its a target. Mine are kept under lock and key.

FineLine
FineLine

Yes Yes! It truly is....If you like long delays and the worst farken traffic in the state.

Posted Images

Isola Grand Master

Isola

Posted
Posted

soooo......

Avatar is a complete piece of boring ass shit. Only good thing about it was getting to see that silly mole Michelle Rodriguez die again. Predictable rehashed phone in hack of a movie.

How do I go about getting back the 2hs 41mins of my life? Does anyone have a flux capacitor?

PWND Grand Master

PWND

Posted
Posted

euro disney epic fail

waste of $140 in entry fees. in terms of rides, movie world or dreamworld rate higher

anyways, it's 1:30 am, and i gots to be up at 5am for our flight to new york. shall have a look for a mets hat once there.

will have net at the hotel in ny, so shall annoy you farkers some more

peace out

666DAN Grand Master

666DAN

Posted
Posted
soooo......

Avatar is a complete piece of boring ass shit. Only good thing about it was getting to see that silly mole Michelle Rodriguez die again. Predictable rehashed phone in hack of a movie.

How do I go about getting back the 2hs 41mins of my life? Does anyone have a flux capacitor?

So glad I refused to ever watch a 3D movie about blue fairies, I'm going to use that 2h:41 and put it to good use....drinking

Bunta Grand Master

Bunta

Posted
Posted
@ Andy:

What was the name of that RB management system that you were raving about a while ago that allows you to run without AFMs? Could I use it on my 20? And will it handle what I just said to Colin & Martin?

Adaptronic, though they are better for 4cyl applications as the e420c only has enough drivers to run a 4cyl in sequential spark. they have a e1280s now but i think it is around the same price as a vipec ect, the main advantage of a e420c was the pirce. it you are happy to run wasterd spark though the e420c is still a really really good computer, my old r33 is running happily on one

Isola Grand Master

Isola

Posted
Posted
shall have a look for a mets hat once there.

Thanks :(

So glad I refused to ever watch a 3D movie about blue fairies, I'm going to use that 2h:41 and put it to good use....drinking

Yeah, I would never have watched it if the GF hadn't. I got bored a few times and went off to make coffee and things, so it probably doesn't owe me the full 2:41, but pretty close :)

Adaptronic, though they are better for 4cyl applications as the e420c only has enough drivers to run a 4cyl in sequential spark. they have a e1280s now but i think it is around the same price as a vipec ect, the main advantage of a e420c was the pirce. it you are happy to run wasterd spark though the e420c is still a really really good computer, my old r33 is running happily on one

Thanks Andy. Don't know why I thought it was an RB one. I'll keep on the hunt :)

Bunta Grand Master

Bunta

Posted
Posted
Thanks :(

Yeah, I would never have watched it if the GF hadn't. I got bored a few times and went off to make coffee and things, so it probably doesn't owe me the full 2:41, but pretty close :)

Thanks Andy. Don't know why I thought it was an RB one. I'll keep on the hunt :)

vipec ftw

Bunta Grand Master

Bunta

Posted
Posted
Cheers - I'll read up on them :)

btw - does anyone know how much mines ECUs go for for the 32? I got a dude wanting me to make him an offer on his, and I have NFI how much to say...

0$ they are for jap fuel and are really only useful to get rid of the speed limiter

Bunta Grand Master

Bunta

Posted
Posted
Is that really the only benefit from it? What if it's mapped for Aus fuel?

you cant remap them, the eprom is covered in about 3 inches of epoxy so it cant be swapped out, the benefit is that on jap fuel they give you slightly better fuel and ignition maps and move the rev limiter and speed cut and the richen and retard part of the standatd ecu. But in Aus all it does is make the car run lean.

Isola Grand Master

Isola

Posted
Posted
you cant remap them, the eprom is covered in about 3 inches of epoxy so it cant be swapped out, the benefit is that on jap fuel they give you slightly better fuel and ignition maps and move the rev limiter and speed cut and the richen and retard part of the standatd ecu. But in Aus all it does is make the car run lean.

ok cool, thanks again :)

I'm reading up on Vipecs, but it's making my brain hurt. So much info!!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • CF.Panda
      R34 25GT Engine Light 21

      By CF.Panda · Posted

      I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Butters
      UniClutch

      By Butters · Posted

      Well they got my money but they are not getting my gearbox ! 
    • GTSBoy
      ECU sees many times the speed than speedo does (R34 swap)

      By GTSBoy · Posted

      It's needed for rolling idle up, and I think it is a decider on VCT also.
    • Kinkstaah
      ECU sees many times the speed than speedo does (R34 swap)

      By Kinkstaah · Posted

      I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...