Jump to content
SAU Community

Inner West Crew Whoretown (toowong/st Lucia/kenmore/indooroopilly And Sometimes Sunnybank?)


Recommended Posts

Morning Mangs,

TFIF. Wonder if I can get away with an 8 hour day today?

For Scott: Z32_ECU_Modifications_Direct_R33_Plugin V6.pdf. Booyah, V6. Please don't use the V3 one to do mine :P.

just keep a pair of baby socks in the car, fits perfectly over the gear knob and either stops it from getting hot in first place if you remember to put it on when parking, or protects your hand after the fact if you forget.

Hmmm i wonder what people would think if they walked past my car and saw my knob covered by a baby sock lol.

Very good idea but i think changing knob would be better as i never did like the one i got.

So I unhooked my wastegate actuator hose before work, went for a drive around to warm up (then a bit longer lol)

Anyway, hit around 10-12psi a few times (before backing off), but laggy, and can still hear a balloon squeak type noise.

Dump pipe on incorrectly?

Stock manifold (untouched when I replaced the turbo)

It's a split dump/front pipe, but not one of the shitty JJR ones, it's got a huge long split for the wastegate gasses. I also checked when I had it disconnected that the wastegate flapper doesn't catch on the interior of the dump (like on the JJR ones)... but that may have changed when I put it all back together..... I'm thinking maybe the gasket could be sitting shitty or something?

The wastegate is completely shut at idle.

So I unhooked my wastegate actuator hose before work, went for a drive around to warm up (then a bit longer lol)

Anyway, hit around 10-12psi a few times (before backing off), but laggy, and can still hear a balloon squeak type noise.

Dump pipe on incorrectly?

so refresh my memory

you are getting no boost when everything is hooked up, but when you unhook the feed to the actuator you can get boost?

Probably a dumb dumb question but one I've never known the answer to

Does the diameter or length of vacuum hose make a difference? Specifically in this case intercooler piping nipple -> actuator?

Edited by mosquitocoils

Yeah I try and keep them as short as needed so that's good.... how about thicker/thinner? Any advantage?

Morning Mangs,

TFIF. Wonder if I can get away with an 8 hour day today?

For Scott: Z32_ECU_Modifications_Direct_R33_Plugin V6.pdf. Booyah, V6. Please don't use the V3 one to do mine :P.

Success

Morn.

Stuck on a train. Plus side it's fark yeah Friday.

I'm on a trian, I'm on a muthaflipping train....

Hmmm i wonder what people would think if they walked past my car and saw my knob covered by a baby sock lol.

Very good idea but i think changing knob would be better as i never did like the one i got.

Too many knobs in that. Not my idea of a fun night out.

Stock manifold (untouched when I replaced the turbo)

It's a split dump/front pipe, but not one of the shitty JJR ones, it's got a huge long split for the wastegate gasses. I also checked when I had it disconnected that the wastegate flapper doesn't catch on the interior of the dump (like on the JJR ones)... but that may have changed when I put it all back together..... I'm thinking maybe the gasket could be sitting shitty or something?

The wastegate is completely shut at idle.

What turob is it? didn't you buy a highflow? It may have a balance issue....

Damnit, Nistune only posted this morning, won't get it till Monday now :(.

Still get to play with the software

Correct... Although I can still hear a squealing leak under boost

gasket or turbo is my guess.

sadface :(

This is for you.

sadface.jpg

oh and scarface.

1235596271926_f.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
    • EMU Classic. For what I need it to do I see no reason to upgrade. Link and Haltech would both cost an extra chunk of money for a lot of unutilized features
×
×
  • Create New...