Jump to content
SAU Community

Inner West Crew Whoretown (toowong/st Lucia/kenmore/indooroopilly And Sometimes Sunnybank?)


Recommended Posts

>butts in....

For those attenting happy laps @ QR with SAuQLD on 15th Jan please note the new on-track time of 6:30am. Pass it on folks.

successful day was successful. got the last 3 cartons of spaten oktoberfest from the german club, and mowed the lawn like a baws with newly restored ride on. Win.

Next job: Fit turbo to ride on :thumbsup:

successful day was successful. got the last 3 cartons of spaten oktoberfest from the german club, and mowed the lawn like a baws with newly restored ride on. Win.

Next job: Fit turbo to ride on :thumbsup:

f**ker

was planning on going out there tomorrow to get one more carton

Somehow landed a gig of designing and testing the infrastructure to be put on this new mine site.

Watch this space for epic failures.

Nice Mang. Who is that with?

Anyone play BF3 on PC? Need someone to do co-op missions with...

Yerp can probably do some co op. I normally just play bulk conquest though lol.

Nice Mang. Who is that with?

Still with the same company, we have a contract for a mining company (largest in the world, to give you an idea) basically I am currently moving in and out of asset groups as IM from each of these groups keeps wanting me to stay with them so I move around so they don't get attached to me. This new project is a bit daunting considering I've never done anything like this before, I will have network services at my disposal as well as countless other pros just around the corner so if successful will definitely look good on the resume.

I expect this site to go into full execution end of this year. So if I'm hanging from a light fixture, you know why.

Morning Mangs,

Back at work :(. FML.

Great Stuff Keaton!

Yerp can probably do some co op. I normally just play bulk conquest though lol.

Yeah you unlock sh*t from doing co-op though :).

Add me on origin: Smity42. Then we can do co-op, and multiplayer on the same server, etc.

Going to umart this arvo to get a new video card and some SSDs... PC was struggling with this new fangled BF3 shiz...

I thought that was about regular HDD's or something...

Still, graph

That being said most of the 240gb drives are more than double the price of a 120gb drive, so its a non choice anyway

why run just standard drive setup.

I bought bf3 on the ps3 cause i wanted to play it without having to upgrade my computer just yet, now my computer is starting to die looks like i'll have to upgrade anyway

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • @Murray_Calavera  If I were an expert I wouldn't be in here looking for assistance.  I am extremely computer literate, have above average understanding on how things should be working and how they should tie together.  If I need to go to a professional tuner so be it, but I'd much rather learn and do things myself even if it means looking for some guidance along the way and blowing up a few engines. @GTSBoy  I was hoping it would be as simple as a large vacuum leak somewhere but I'm unable to find anything, all lines seem to be well capped or going where they need to be, and when removed there is vacuum felt on the tube.  It would be odd for the Haltech built in MAP to be faulty, the GTT tune I imported had it enabled from the start, I incorrectly assumed it was reading a signal from the stock MAP, but that doesn't exist.  After running a vacuum hose to the ECU the signal doesn't change more than 0.2 in either direction.   I'll probably upload a video of my settings tomorrow, as it stands I'm able to daily drive, but getting stuttering when giving it gas from idle, so pulling away from lights is a slow process of revving it up and feathering the clutch until its moving, then it will accelerate fine.  It sounds like I need to get to the bottom of the manifold pressure issue, but the ignition timing section is most intimidating to me and will probably let a pro do that part.  Tomorrow I'll try a different vacuum line to T off of, with any luck I selected one that was already bypassed during the DBW swap. @feartherb26  I do have +T in the works but wanted to wait until Spring to start with that swap since this is my good winter AWD vehicle.  When removing the butterfly, did it leave a bunch of holes in the manifold that you needed to plug?  I thought about removing it but assumed it would be a mess.   I notice no difference when capping the vacuum line to it or letting it do its thing.  This whole thing has convinced me to just get a forward facing manifold when the time comes though.
    • Update: tested my spark plugs that are supposed to be 5ohms with a 10% deviation and one gave me a 0 ohms reading and the rest were 3.9ohm<, so one bad and the others on their way out.
    • 9" wheels are a little too wide for a RWD 32. They can fit. People have put R33 GTR wheels on 32s for years and years. But they are a very tight squeeze. This has been known for about 30 years. As I said - there is no difference between a 17 and an 18 in terms of what will fit. The rolling diameter needs to stay about the same as stock - not very much larger. If you increase that, you will start to have problems. If you increae rolling diamater at the same time as yo increase width, you will have problems earlier. as 9" wheels are pushing the boundaries already, you would need to be careful with tyre choice. I would put 8.5s on the front of mine, but would expect problems with 9s.
    • post up screen shots of your injector tables
    • Diagnostic flow for a code 21 says check signal at the ECU pins, on a voltmeter of some kind it should read 0.1V at idle, 0.12V cranking, 0.15-0.25V at 2000 rpm. Check each coil such that +1, -3 is infinite or very high resistance, -3, +2 should do the same. (-1, +3), (+3, -2), (+1, -2), and (-1, +2) should all be somewhere between 0 ohms and high resistance. If you trace the path from the coil pin all the way back to the ECU in the diagram the resistance you measure at the coil vs connected to the harness should be pretty much the same. 
×
×
  • Create New...