Jump to content
SAU Community

Recommended Posts

Hey V35_Paul did you install or get installed the plenum spacers? how is it since? I'd like to do it too.

Also I've been trying to get headers for my V35 and I was going to get them through C-Red who did the install to his own V35 before he sold it, but I havn't been able to get in touch with him to get some.

Can anyone recommend where etc I can get a set and who could install them around Perth?

  • Replies 143
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Got my Spacer but yet to put it on. I'm doing a Dyno test before and after. I'm on the Dyno friday at 3 for the before test.

I also heard that you need to put the spacer on when the car is cold and that the computer "might" need running time to adjust to the spacer so i will do the after test monday.

I'll put it on myself doesn't look to hard.

Found this on Ebay http://cgi.ebay.com.au/Stainless-Steel-Exh...p3286.m20.l1116

don't know anything about it

Lots of Headers in US

Well I did the dyno test. My car is "Stock". Did 3 runs, I got 163kw on 2 runs and 162kw on one.

I couldn't put the Spacer on becasue the car is too hot, I'll put it on tomorrow then do another run on monday.

Here are my results of my best run

post-60315-1238755132_thumb.jpg

post-60315-1238755153_thumb.jpg

post-60315-1238755169_thumb.jpg

More problems with my Body kit. need clips for the side skirt. i'm going to try some plaster board cross screws. (When you screw them the back stars out and pulls tight) They are used to hold A/C up on plaster walls.

if it works i'll have my car back today looking super cool. (it was already cool before but now it's SUPER)

All done. Now i can stress less.

Body kit looks good, still need to put a badge on the grille, badges on the skirts and fog lights.

Tell me what you think, do you like it or should i have got something else?

pics with the phone

post-60315-1239334656_thumb.jpg

post-60315-1239334725_thumb.jpg

  • 1 month later...
Hey WA V35 owners.

Thought i would try and find out how many WA V35's there are.

Post a pic (if you got one) and count off.

(1)

hey im a new member from WA Ipost-63076-1243175761_thumb.jpgv had this ride for about 4 months and i love it its a 2003 v35 GT 6 speed manual hope ya all like

  • 1 year later...

its an old thread but seems to me that some have come and gone... can we do a count of who in wa actually uses this forum

1.xtc - please add along...this will give me an idea or indication to do the next cruise as i want as much members out there as possible, and a good notice.

  • 2 weeks later...

hey guys im ultra new..... just got my V last wednesday, hit the pits on friday and cleaned it up on the weekend

so yeah, i have been keeping an eye on this site for a while

Good to see that there are some V lovers in Perth

Im learning new things about my Beautiful car every day :P

Hope to see you on the streets some time, unfortunatly i work alot and get pretty busy doing ... well not doing much but

im glad that there are others in WA to help me out if ive got issues and..... i doubt it but if need be i may be able to assist you all :P

ill try and stay active

>.>

<.<

but im notoriously bad at using the internets

POST NO#1 COMPLETED! (bows)

now.. how do i send thisssss.......

Its a blue one xtc, not quite as sexy as yours (yet) haha, after polishing it up it seems to have a pearlieishie quality YAY !

doubt ill get to your lvl of mods but i will keep tinkering away at it who knows... thats what they all start saying next thing i know ive got a green car with fluro orange rims and a biplane wing on the back

errr... i think i just vomitted in my mouth. You can be assured i would never do that too my precious V.

oh and thanks for the warm welcome Crisp =D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I just bent the ends of my premo plates. It even went through Regency like that after the engine conversion and the inspector (a great bloke!) just squinted his eyes and said "I didn't see that". Plates, and how they look, are just something that have zero importance to me.
    • Yeah, I would have said the same. It makes me suggest that there are other things wrong, such that the ECU is totally unhappy with the broken sensor. The only other thought here is that maybe it is shorted, which might cause a different issue to the typical "disconnected" sensor.
    • The fact that US/JDM plates actually fit the skyline bumpers properly is a big, big thing for me as they are the correct dimensions. Annoyingly you can't opt for a normal plate (or plate combination) in that size. You have to make up your own one, and at that point you'd still know it wasn't randomly assigned. 
    • Well, really, that's any ECU, because it's not so much the ECU that the tuner connects to, but a laptop that's connected to the ECU. You have to have the tuning software installed locally. The "remote" part is essentially just remote desktop (RDP) or VNC type access. Nevertheless, if you're looking to upgrade, then you're immediately in the Haltech/Link territory, both of which can be done by any number of competent tuners here in Oz. But without a dyno, you'll definitely also need a wideband O2 sensor fitted, and you'll probably be relying on "auto" tuning a bit, where you drive it around under various loads and then apply the corrections that the ECU learns (basically applying the fuel trims that the ECU has to do to correct the mixtures). Tuning the timing is a little harder. It can be difficult to trust the old OEM knock sensors on RBs, so it is definitely best to have someone who knows what they're listening for, with knock ears (a piezo microphone connected to the engine, and and little amp and headphones so the listener can hear the angry men with hammers who live in the engine). That is more difficult to do remotely, and I suspect the only sane way is to be quite conservative on timing. But that's OK. You're probably waaaaay better off with conservative timing where you are. What is the fuel situation? 98RON available? Or low grade jungle juice?
    • I see your point, I didn't think too deep into it, was purely focused on the price. There's no bad blood between myself and GSM, they acknowledged the price was cheaper else where and at the time couldn't match it. 
×
×
  • Create New...