Jump to content
SAU Community

Recommended Posts

Hey V35_Paul did you install or get installed the plenum spacers? how is it since? I'd like to do it too.

Also I've been trying to get headers for my V35 and I was going to get them through C-Red who did the install to his own V35 before he sold it, but I havn't been able to get in touch with him to get some.

Can anyone recommend where etc I can get a set and who could install them around Perth?

  • Replies 143
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Got my Spacer but yet to put it on. I'm doing a Dyno test before and after. I'm on the Dyno friday at 3 for the before test.

I also heard that you need to put the spacer on when the car is cold and that the computer "might" need running time to adjust to the spacer so i will do the after test monday.

I'll put it on myself doesn't look to hard.

Found this on Ebay http://cgi.ebay.com.au/Stainless-Steel-Exh...p3286.m20.l1116

don't know anything about it

Lots of Headers in US

Well I did the dyno test. My car is "Stock". Did 3 runs, I got 163kw on 2 runs and 162kw on one.

I couldn't put the Spacer on becasue the car is too hot, I'll put it on tomorrow then do another run on monday.

Here are my results of my best run

post-60315-1238755132_thumb.jpg

post-60315-1238755153_thumb.jpg

post-60315-1238755169_thumb.jpg

More problems with my Body kit. need clips for the side skirt. i'm going to try some plaster board cross screws. (When you screw them the back stars out and pulls tight) They are used to hold A/C up on plaster walls.

if it works i'll have my car back today looking super cool. (it was already cool before but now it's SUPER)

All done. Now i can stress less.

Body kit looks good, still need to put a badge on the grille, badges on the skirts and fog lights.

Tell me what you think, do you like it or should i have got something else?

pics with the phone

post-60315-1239334656_thumb.jpg

post-60315-1239334725_thumb.jpg

  • 1 month later...
Hey WA V35 owners.

Thought i would try and find out how many WA V35's there are.

Post a pic (if you got one) and count off.

(1)

hey im a new member from WA Ipost-63076-1243175761_thumb.jpgv had this ride for about 4 months and i love it its a 2003 v35 GT 6 speed manual hope ya all like

  • 1 year later...

its an old thread but seems to me that some have come and gone... can we do a count of who in wa actually uses this forum

1.xtc - please add along...this will give me an idea or indication to do the next cruise as i want as much members out there as possible, and a good notice.

  • 2 weeks later...

hey guys im ultra new..... just got my V last wednesday, hit the pits on friday and cleaned it up on the weekend

so yeah, i have been keeping an eye on this site for a while

Good to see that there are some V lovers in Perth

Im learning new things about my Beautiful car every day :P

Hope to see you on the streets some time, unfortunatly i work alot and get pretty busy doing ... well not doing much but

im glad that there are others in WA to help me out if ive got issues and..... i doubt it but if need be i may be able to assist you all :P

ill try and stay active

>.>

<.<

but im notoriously bad at using the internets

POST NO#1 COMPLETED! (bows)

now.. how do i send thisssss.......

Its a blue one xtc, not quite as sexy as yours (yet) haha, after polishing it up it seems to have a pearlieishie quality YAY !

doubt ill get to your lvl of mods but i will keep tinkering away at it who knows... thats what they all start saying next thing i know ive got a green car with fluro orange rims and a biplane wing on the back

errr... i think i just vomitted in my mouth. You can be assured i would never do that too my precious V.

oh and thanks for the warm welcome Crisp =D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yeah I've had too many issues with knock off's on the BMW's. I don't want to do a job twice or more because the parts are shit.
    • I read this and thought "ah! I will do this scissor jack on the tow point thing!" I just use my floor/low profile/costco jack and lift the car up by the tow hook itself, then slide jack stands under. Never thought about using scissor into floor jack combo :p
    • Well, my new WMI system took much longer to finalize. I actually missed my dyno appointment last Friday and lost my 150$ deposit. I'll be going back in the next week or two.  To sum it up. I only kept the AEM tank from my old setup. I replaced the AEM pump with a higher flow/pressure ProMeth 30GPH pump. I also swapped over to a 6AN low pressure feed line to the pump from the tank. There's also a pressure switch you cannot see on the pump high pressure line.    This is feeding 6x 200CC direct port nozzles and 1x 500CC Pre Throttle body nozzle. All fittings are Swagelok, because well why not. I also have a 300PSI pressure sensor up front.    I now have my Haltech ECU controlling everything. I start my pump with a basic relay at 5PSI and deadhead it. I then PWM a 3000CC methanol Injector to control flow starting around 10psi. The pressure switch in the trunk, along with my tank level are safeties before I ever get to 10PSI, and then I use my pressure sensor upfront as a secondary safety to cut the WMI and corrections in case the injector blocks or a line ruptures.  Wish me luck on the dyno!    
    • So, I'm back with bad news. There's no jack long enough on this planet that will reach the front subframe. If by some chance there is, it would weigh 200lb's.  I purchased a long reach jack... The damn thing weighted 120lb's and was massive. Didn't even come close, was still short at least a foot. It was a pain, but I brought it back. Next I decided HA! No problem, I'll get an Extra long reach jack. Well, I couldn't lift the box... It must have weighed 160LB's and luckily there was an open box in store. I took measurement and was still nowhere close.  Sadly I've lost hope and have accepted defeat. 
    • Thanks for that tip, niZmO_Man. I think the battery is OK. It's quite a new one, but I'll check. Last time I needed a new battery, everything electronic was fine, except that there wasn't enough current to turn over the starter. I decided to order one of the partial AV system translation CDs from Car Audio Workshop in NZ. That might have some effect, or help me diagnose the date problem. 🤞
×
×
  • Create New...