Jump to content
SAU Community

Recommended Posts

had a bit of an accident and from what i can tell i need these parts:

R33 S2 headlights

s2 front bar support

aircon fan

s2 radiator support

s2 radiator (maybe)

s2 radiator shroud

s2 clutch fan

s2 bonnet

s2 aircon radiator (maybe)

cheers

Justin

Link to comment
https://www.sau.com.au/forums/topic/26184-help-parts-needed-immediately/
Share on other sites

Justin,

Not good :P I hope your car is OK.

I can help out with the clutch fan and radiator shroud if you can't get one closer to home.

They are both off a series 1, but I'm sure they would be the same.

J

Justin,

Sorry to hear about your car, hope your alright. I have some of these parts:

R33 S2 headlights (WIll have in a couple of weeks)

s2 front bar support (will have in a couple of weeks)

aircon fan (I have, series 1 and series II are different)

s2 radiator support (I have)

s2 radiator (I will have in a couple of weeks)

s2 radiator shroud (I have)

s2 clutch fan (I have)

s2 bonnet (I have)

s2 aircon radiator (I have)

Ahmed, yeah im ok buddy

ill get some quotes early next week and ill let u know exactly what i need

but i know the parts without the maybe after it i do need

if u could give me a price on each of the parts that would be fantastic

Jayson, that would be awsome, but im sure next time im up ill try and organise another cruise so ill get to c it for sure

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...