Jump to content
SAU Community

Fs: R32 Parts, S13 Exhaust, R33 Wheels, 16" And 14" Tyres

jakez88
 Share

Recommended Posts

jakez88 Veteran

jakez88

Posted
Posted (edited)

hey guys i have the following for sale as i have no use for it anymore and its just cluttering up the back yard:

1. R32 GTST stock catback exhaust. not perfect but in good working order: $70

dsc00249b.jpg

2. R32 GTST standard tie rod end with new boot. not sure on the size but all i remember was taht the size was 14mm. good working order: $15

dsc00259.jpg

3. R32 GTST radiator. leaking pretty bad at top in fins so would suit rebuild: $10

dsc00256o.jpg

4. R32 GTST radiator shroud. good condition: $10

dsc00253j.jpg

5. R32 GTST standard front rotors. were taken off for rwc because 1 of them was 1mm below minimum depth otherwise were working good. the other one was roadworthy: $30

dsc00255caf.jpg

6. R32 GTST stock shocks and springs. were taken off for rwc a while back because 1 front shock was leaking. others are all good: $60

dsc00254p.jpg

7. R32/33 series 1 GTST coilpacks. had them as spare for my r32 but never used them. pretty sure the yare in good working order. 2 are high temp siliconed: $50

dsc00252g.jpg

8. R33 stock wheels with brand new Diamondback 225/50r16. came with my 33 for rwc and have only driven on them for 250kms so far. they are on the car now and i need them to roll around so not really keen on dropping the price drastically so this is more of a EOI to see if anyone will buy them as i will be buying new wheels soon. awesome condition: $500

dsc00260t.jpg

9. S13 stock catback exhaust. from a rb20 silvia so should probably suit sr20s. good condition with abit of surface rust: $70

dsc00257e.jpg

10. Kakimoto muffler with 3" inlet. to suit anything. don't know what it was on. $40

dsc00258w.jpg

11. Pirelli P6000 205/55r16. low on tread but just 1mm above wear indicators. more wear on shoulders. would be good to use for stockies or drifting. $15

dsc00251t.jpg

12. have assorted 14" tyres some are new and never used but have been stored in my garage for years and others are used. sizes are 195/65r14-205/60/14. chuck them on the hachi,ke,s13 to drift on. tyres will cost $5-$20 each enquire for exact prices and brands.

13. Kenwood 12" subwoofer box. its a small one too so would be good for our car's boots. good condition. $15

some items i'm looking to swap is my metal finish bullet style razo gear knob with a good condition r33 series II gear knob and a clean standard white r33 series II spoiler for the drift lip spoilers also in white.

big items will need to be picked up in western suburbs or melbourne. smaller items can be posted.

contact me on 0432454387.

jake.

Edited by jakez88
jakez88 Veteran

jakez88

Posted
  • Author
Posted

sorry mate don't really want to go across to the city just for a $10 part.

everything is still for sale!

jakez88 Veteran

jakez88

Posted
  • Author
Posted (edited)

i can post em man but it'll be a extra 40 bucks to get em down to tassie. i'll ask what the exact postage will be. let me know if you wanna do it. can't really be bothered disassembling it sorry man lol.

Edited by jakez88
jakez88 Veteran

jakez88

Posted
  • Author
Posted

coilpacks are sold!

R32 front rotors $20

R32 shocks and springs $60

S13 standard exhaust $60

pirelli drift 16" tyres $10

kakimoto muffler $40

still for sale!

  • 2 weeks later...
jakez88 Veteran

jakez88

Posted
  • Author
Posted (edited)

kakimoto muffler is gone.

r32 stock suspension, r32 front rotors, s13 stock exhaust, 16" + 14" tyres are still for sale..get them out of my house now!!

Edited by jakez88

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • The Bogan
      NC MX5

      By The Bogan · Posted

      Kittens in first to claim dominance of the residence, then puppies later From past experience, the other way around can be problematic to say the least  Those weird "Dobby looking"  little kittens are not cheap....LOL
    • MBS206
      NC MX5

      By MBS206 · Posted

      At least yours have parkour down pat. One of mine will still trip over his own shadow and fall over... He's a special type of cat... Ha ha ha
    • MBS206
      NC MX5

      By MBS206 · Posted

    • SteveL
      Leak from Tokico BM50 Brake Master Cylinder

      By SteveL · Posted

      The question then becomes - was there any fluid coming from that hole before you did the rebuild ?    You may not have noticed, of course.   Depending on how you did the rebuild, the possibility has to be considered that somehow (cleaning ?)  fluid entered that hole and is now being 'forced'  out by small movements of the proportioning valve.   From the factory, there's actually a small rubber plug in that hole but with age and under-bonnet heat it's quite common for it to 'go missing'.  That rubber plug is designed to allow the venting process but also to prevent 'stuff' getting to the area (prevent corrosion, etc).   The plug is also not available as a spare part AFAIA. Personally I wouldn't race and buy a new master just yet but keep an eye on the area to see if the 'leak' continues.   If you're concerned about brake fluid damaging nearby paintwork, cable tie a piece of suitable absorbant material over the hole and remove/monitor occasionally.    Operation of the proportioning valve and the brake master itself won't be affected, but also keep an eye on brake fluid level, of course. In terms of a new master, the genuine part is getting expensive, unfortunately.  Amayama is showing AUD900+.   I was searching recently and there's an aftermarket part available from Japan made by 'Parts Assist': https://zenmarket.jp/en/yahoo.aspx?q=BNR32%2bBM50&p=1 Whether it's any good I have no idea, although in my experience Japanese aftermarket stuff is pretty good quality-wise.   The above site allows overseas buyers to purchase stuff more easily from Japan but there are fees and shipping costs, of course.   The original Japanese seller page is here: https://auctions.yahoo.co.jp/jp/auction/p1197401228 Copper/Nickel is fine but I still prefer bundy tube and it's also cheaper.
    • Duncan
      NC MX5

      By Duncan · Posted

      Your chihuahuas look weird!
×
×
  • Create New...