Jump to content
SAU Community

Recommended Posts

Yup. I've put a couple of these in R32's.

Haven't had any issues to date and the drivers are very happy with the results.

I did the work myself as I've had electronics experience, but I would be surprised if you got it done for the $40 that the advertiser is claiming.

I solder cradles into the PC boards so the chips can be easily removed for future EPROM programming when sent away for reprogramming.

Just don't expect 1000hp results or try to push too much power through them.

There are limits to what you can program into the IC, but they are a very cheap bang for buck item.

Link to comment
https://www.sau.com.au/forums/topic/262505-marobi-chip/#findComment-4496157
Share on other sites

so you'd recommend them for the price? and what am i expecting to pay for soldering etc?

Yes I recommend them for the price, but like I said - Don't try to milk too much out of them.

As far as soldering, expect to pay around $100. You may need to take it to a specialty electronics shop as most TV repair mobs will not cover the ECU if they fry it.

Link to comment
https://www.sau.com.au/forums/topic/262505-marobi-chip/#findComment-4496726
Share on other sites

Im sus about pre-programmed chips from ebay/trademe...majority of them just copy one person's custom tune and spam it out as a generic map for anyone who buys. We all know every car is different so how could one generic tune work for all...

Save your money and get a proper ecu remap with either nistune ( www.nistune.com ) or contact CEF11E ( http://www.skylinesaustralia.com/forums/CEF11E-m12633.html ) who programs ecu chips.

Both options will provide you a more reliable tune as opposed to plugging in some 18psi unknown chip...

TV repair shops will charge about $50 to replace the chip if they have a desolder station.

Link to comment
https://www.sau.com.au/forums/topic/262505-marobi-chip/#findComment-4496752
Share on other sites

  • 6 months later...
hey there

im just wondering wether or not any body here has had any experience with these chips as the supplier is in australia?

any info would be great thanks.

marobi chip

I am also curious about this as I am considering the option for the RB20DET swap into my S13. I dont need a lot of power and dont plan on a turbocharger bigger then an RB25 unit. But ive never heard anything about this company as I am located in Chicago, USA.

Link to comment
https://www.sau.com.au/forums/topic/262505-marobi-chip/#findComment-4860732
Share on other sites

Im sus about pre-programmed chips from ebay/trademe...majority of them just copy one person's custom tune and spam it out as a generic map for anyone who buys. We all know every car is different so how could one generic tune work for all...

True, but a standard computer will also run, its just that it will hit all the overboost protections. A generic chip done well will be super conservative like a stock ECU but without the overboost extreme timing cut/richening. So it certainly wont be as good as a custom tune, but a lot better than a stock ECU. So not necessarily a bad choice for a streeter done on the cheap.

Link to comment
https://www.sau.com.au/forums/topic/262505-marobi-chip/#findComment-4860904
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
    • BTW I measured the jack I have, it is 70mm at the saddle but you only have about 700 until it returns to 150mm high at the cylinder so it is good but no magic bullet.
    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
×
×
  • Create New...