Jump to content
SAU Community

Recommended Posts

Hi guys and girls!

I have a Metal Cat installed more than 24 months ago. Recently i have been having whitish/grey smoke coming out of my exhaust. Mechanic says it might be some engine oil going into my engine after a session at AHG skidpad(i do not have a oil catch can before was told the reservior on the rocker cover should be sufficient enough). There shouldnt be a problem with the turbo seals as it is a Brand new unit from HKS. The car has been backfiring once in a while.

Whitish/grey smoke was also thought to be condensation but i dont think so cause the car has been driven for more than an hour on the road.

This only happen when i hit full boost! On idle it doenst happen. SO please do help me. I am having tons of problems with the car, all i have done is put good parts and proper mantainance into the car.

SO my question is: Are this the symptoms of a failing CAT?? Does it cause greyish/ whitish smoke to come out of your exhaust?

Link to comment
https://www.sau.com.au/forums/topic/263107-metal-cat/
Share on other sites

Whitish smoke normally due to Condensation in the exhaust but how can this be happening after an hour of driving in a 28 degrees day? Shouldnt all the "water" in the exhaust be gone by now :blink: ?

WHitish smoke can also be cause by engine oil or coolant if i am not mistaken. The tuner and mechanic isnt worried about it because the still reckon its condensation in the exhaust. They have taken the car for a drive and there was another car folowing from behind, all they say was ITS MORE GREY THAN WHITE :D . I am putting all my trust in them as they are one of the most reputable tuner/shop in Perth :D .

The whitish/greyish smoke only blows out when i hit 16psi on most gears!

Link to comment
https://www.sau.com.au/forums/topic/263107-metal-cat/#findComment-4504860
Share on other sites

white smoke on boost means there is a seal that is not working properly - the 3 usual suspects are turbo (water or oil seal), head gasket (oil into the combustion chamber), or leaking from the plenum water galley into the head.

Link to comment
https://www.sau.com.au/forums/topic/263107-metal-cat/#findComment-4504915
Share on other sites

Whitish smoke normally due to Condensation in the exhaust but how can this be happening after an hour of driving in a 28 degrees day? Shouldnt all the "water" in the exhaust be gone by now :( ?

Correct - its not water/condensation. That will all boil off even before you cars fully up to temp.

WHitish smoke can also be cause by engine oil or coolant if i am not mistaken. The tuner and mechanic isnt worried about it because the still reckon its condensation in the exhaust. They have taken the car for a drive and there was another car folowing from behind, all they say was ITS MORE GREY THAN WHITE :ermm: . I am putting all my trust in them as they are one of the most reputable tuner/shop in Perth :happy: .

The whitish/greyish smoke only blows out when i hit 16psi on most gears!

My guess is oil - what does the dipstick say?

Dead cat = black smoke.

Link to comment
https://www.sau.com.au/forums/topic/263107-metal-cat/#findComment-4505170
Share on other sites

i just re-read my post. its usually water in the combustion chamber that causes white smoke. burnt oil is usually blue.

What causes the water to go into the combustion chamber??

And why doesnt the whitish/greyish smoke comes out during idling. If theres water shouldnt there be constant smoke coming out :O ?? DOenst the water recirculated when it is idling?

The oil level was check regularly, it seems fine.... and the oil pressure on the dash all seems normal.

Just came back from a drive, got my missus to drive it while i follow her around.

The smoke smells more like something is burning.... Smells like weed :D .... Nah just joking. IT smells like something is burning. Doesnt smell like running too rich (petrol smell)

Link to comment
https://www.sau.com.au/forums/topic/263107-metal-cat/#findComment-4505647
Share on other sites

What causes the water to go into the combustion chamber??

And why doesnt the whitish/greyish smoke comes out during idling. If theres water shouldnt there be constant smoke coming out ;) ?? DOenst the water recirculated when it is idling?

The oil level was check regularly, it seems fine.... and the oil pressure on the dash all seems normal.

Just came back from a drive, got my missus to drive it while i follow her around.

The smoke smells more like something is burning.... Smells like weed :( .... Nah just joking. IT smells like something is burning. Doesnt smell like running too rich (petrol smell)

i covered that.

white smoke on boost means there is a seal that is not working properly - the 3 usual suspects are turbo (water or oil seal), head gasket (oil into the combustion chamber), or leaking from the plenum water galley into the head.

from what i can gather it sounds like you're smelling burnt oil. find out where its coming from. check the following:

- the lowest point on the hot side of your cooler piping,

- radiator for milky residue under the cap and

- your intake pipe.

if it is actually oil then there will be traces there. if not then at least we can rule that out.

Link to comment
https://www.sau.com.au/forums/topic/263107-metal-cat/#findComment-4512821
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah good luck out there! Will be good to see a mighty GTST going harder than the GTRs
    • i will be there 😁
    • Hello!  i just finished manual swaping my r34 skyline with a r33 rb20de box(RB71C)box  When the car is running it squeaks crazy loud and it was smoking from the gearbox area. The gearbox is fine it was tested. The clutch slave cylinder seems like it doesn't fully releases the clutch. I want to ask if this noise is from the throw out bearing or could it be the clutch assembly or disk att.xFliq87Gzw6kImKBVqDebXkj0fBqymk0JaYeP3_3SlM.mp4
    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
×
×
  • Create New...