Jump to content
SAU Community

Adding A Carputer To My '03 350gt Prem... Want To Solve The Nav/movie/music/internet Problem Once And For All!


Recommended Posts

Hi all, I've been reading through the forum but haven't seen much on the following mods. Anyone have any info on the plausibility of these mods:

I have a '03 350GT V35 Prem with bose stereo.

I want to install a computer (running windows) in the boot and run the video inputs into the in dash screen and running the audio into the Bose stereo. Here's what I'm planning to do.

1) I want to replace the OE screen with a touch screen to better interface with the computer, while maintaining the ability to hide away the screen in the dash when not using it. (Therefore must be the same size as the OE screen)

2) Run an IPod USB cable from the carputer to a docking station modified from the ashtray in the centre console.

3) Keep the OE computer connected to the new touch screen and still controlled by the OE buttons (I can read Japanese so I still want to see things like fuel consumption amount, trip counter etc.) I figure I could switch between input devices.

I figure this way I'll have full audio and video (dixv, xvid etc) capability through the in dash screen and has full Nav using the carputer's GPS card and off the shelf software. (Australian maps can be downloaded too) Then I can tether my Ipone via the USB dock and have internet access also.

Here are my questions:

1) Are there any touch screen's out there that 1) fit in place of the OE screen and 2) have the correct inputs to connect all the necessary connections etc.?

2) What sort of connectors do I need to connect my computer to the Bose stereo as an audio input source?

Any help would be appreciated.

  • Replies 83
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

did u search "carputer" and talk to this guy?

he's done something there perhaps he can expand to the rest of what u want.

http://www.skylinesaustralia.com/forums/Ca...10-t261099.html

i'm not sure about programming oem buttons - you'd better off chuck them in a bin!

have a read of this brainstorm... kind of gives something much similar to what you're doing but a lot less fiddly and ... to be honest what you're doing sounds VERY risky..

have a read of this brainstorm... kind of gives something much similar to what you're doing but a lot less fiddly and ... to be honest what you're doing sounds VERY risky..

Risky? no.. Rediculous... yes!

Kesium and I have brainstormed this for at least several seconds and have come up with no potential problems

The only tricky part to this (maybe it's not tricky.. i dunno) is figuring out what touchscreen to use, and how to connect the existing hardware to it... does anyone know how the dvd-rom etc is connected to the screen??

The car-puter touch screen solution with custom front end is by far the best way to go about things.

Positives

HDD for music/movies etc

Internet

Nav - usb/bluetooth gps reciever and whatever nav software you want (plus you don't need to use the gay remote like the garmin)

OBDII interface gives you all the info on what your engine is up to and can be displayed however you want it

TV via pci tv capture card

Negatives

nothing

As you can see, my logic and research is sound

All jokes aside, as long as we can replace the oem screen and connect audio to the bose system... this is a piece of piss.

Down the track, you could pull apart the redundant oem buttons and do some frankenstein magic to connect them to the guts of a keyboard to allow the oem controlls to control the front end. That may sound tricky but it isn't.

I've installed carputers to a few cars now and they are awesome, affordable, awesome, upgradable and awesome.

Thanks guys for the links, interesting. Only thing it seems as these other guy's aren’t leaving the OEM software and OEM computer connected (i.e. the DVD-ROM box). I want to keep these features, just in putting them into the new touch screen under a different source. (Therefore keeping the need for the OEM NAV buttons).

If anyone's got diagrams of the electrical system on the v35 especially as it pertains to connecting the audio to the BOSE and how the OE DVD-ROM box connects to the OEM screen, it'd be much appreciated! :banana:

I like the idea of connecting the immobilizer to my car-puter and uploading GPS co-ordinates. Sorta like a home version of the low jack. But since I plan on using my iphone for the I-net connection this probably isn't useful. Well unless both my car and iphone are stolen. Then that's just a bad day for everybody.

your studies are found unfalse because, as you'll see from my research

SocialPieChart.png

885911029858.jpg

gr2bargraph3d.jpg

statistics.jpg

whopper.jpg

ScaryClown.jpg

haha

nah the reason i say it's risky is cos v35 seems to have it's cpu and brains in those screens

it's not really something me, an amatuer, would really want to touch too much

Seriously guys,

The car pc is the way to go.

It offers a far cheaper alternative to modifying the existing stuff.

No translations disks (which are still apparently coming)

No expensive GPS mods

No band expanders

No replacement tv tuners

why not just ditch the existing system (apart from the volume knob)

there is nothing (as far as I can tell) that the standard set up can do that a carputer can't do.

A carputer will cost about $800

the screen about $400

GPS reciever about $80

OBD-II about $150

tv/radio tuner pci card about $50

Software... that's up to you! (read "eval" copies)

Obviously there will be more costs involved for installation etc but i think it's clear that we should concentrate our efforts on coming up with a solid plan for integrating a new system instead of trying to make the existing one work

Did a little digging on the interface side of things. Maybe instead of an after market touch screen which invites a whole range of combatility issues, I keep the OE screen and just input the car-puter into the exsisting display and stereo and use an airmouse for the interface. I'm looking at this product "http://www.mobileairmouse.com/". (The demo looks awesome.)

Airmouse basically turns my iphone into a wireless air mouse and keyboard. I could mount this just below the OE screen and used as a touch pad, or it can be used by holding it in my hand and using my iphone as a wand, offering the best of both worlds. This basically comes down to if it is possible to connect the car-puter to the bose stereo and the OE screen or not. hmmmm...

Hmmm... Well it is better than Mr Eps' freaky ass clown face.. Thanks Eps for such informative and terrifying research

Offtopic, Mjay I like your avatar...do u have a bigger version...and maybe like 2 mins after this one?

LOL - with carputer installed in your car, with wireless broadband a bit torrent client installed, you can d/l any 'fast forward' scenes as you want while cruising 4 hours to GOR... :ph34r:

By the way, those pics come from a MAGAZINE media coverage here:

http://www.djgcue.com/AccessMagazine.html

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • When you crank your car, and hit it with a timing light, can you see a steady crank timing?
    • Oh, forgot to add, A few months ago I was getting mixture codes and the car was using crap loads of fuel. You could smell the unburned fuel in the exhaust, it was crazy strong. Economy was over 17.5 l/100 and usually around 19. I smoked the engine and found a leaky CCV hose which I replaced and then I replaced my two pre cat O2 sensors, I also replaced the MAF. This fixed my mixture codes and improved my exonomy but I'm still 14 - 15 l/100 when pottering about town so something is still amiss. Throttle response is much better and it has more pep but I'd like to know why it's still so thirsty (and I'm hoping that whatever it is gives me a bit more poke).    
    • Car is on factory injectors/z32 maf/ q45 throttle body/ z32 ecu with nistune 
    • Hello all, currently finishing up a rb25 swap into my s14. Having issues with starting, car has spark (confirmed by pulling a plug and watching it spark), has fuel(confirmed by checking pulse/voltage at injectors all spark plugs are soaked in fuel). Car cranks over and pops into the exhaust with a heavy fuel smell but no attempt to start or run, I have torn the timing cover off and triple confirmed timing, turned the CAS in multiple spots both directions, attempted to start with coolant temp and maf unplugged, checked my fuel lines and made sure they weren’t backwards, checked voltage at cas/injectors/coilpacks, made sure all the grounds in the harness are connected and added a few grounding straps (1 from chassis to block, 1 from chassis to head, and 1 from chassis to igniter chip) I am getting stumped here. As a last ditch effort I made a full grounding harness tonight that’s going to run from the battery and add an extra ground from the battery onto the coil pack harness/igniter chip/ intake manifold/ Wiring specialties harness ground/ and alternator. I’m hoping maybe the grounding harness will fix it here but posting here to see if anyone has any other ideas on what else I can check. My fuel pressure is unknown right gauge will be here tomorrow.  IMG_3206.mov
    • yeah I was shocked when I checked my spare OEM on and as below that's how they come from Nissan. (side interesting note new NEO gearbox and replacement park lack the brass bush on the tips and its just all alloy) unsure about damage to the box currently back at 1110 to be pulled down/inspected and selector fork replaced as he built it previously and given the never before seen failure on his billet forks he is replacing it under warranty. He said he has used always OEM the keyway tab without issue for years so it could be an unlucky coincidence. I did talk to him about the sharp corners and stress concentration too. Re: hard shifts i got 7+ years out of the OEM one and the fork itself failed not the keyway. so could be bad luck as I said or an age thing + heat cycles in box and during fabrication of billet?
×
×
  • Create New...