Jump to content
SAU Community

Recommended Posts

5 stud - Skyline offset ,

Don't really care what they look like as long as they are in good nick, no scratches, balanced.

Sydney sellers - so I can look first.

Don't care what sort of tyres are on them, prefer none actually.

Not looking for super duper expensive ones.....

Cheers,

Link to comment
https://www.sau.com.au/forums/topic/26334-wtb-2-x-16-x-8-or-9-alloy-wheels/
Share on other sites

Your going to need 17's to get something wider than 225's.

I've already looked into it (for track wheels) and even 16x8" will only give you 225's at the most (for semi-slicks if thats what your after). To get a 235-255 your going to need -atleast- a 17"

Hi Ben,

You are assuming that I want these for track wheels - I am looking for track wheels also - but I would go 18" or 19" for that purpose. (prolly new ones though)

These are for drags - you can get Nitto Nitto NT555R 245/50/16 which would fit nicely I think.

Cheers,

IMO:

* 16's with 225's (regardless of the tyre) is good for nothing but driving to work and back each day.

* Drags, a 16" would be ideal with -atleast- 245's on the rear (so the above mentioned 16" deep dish wheels would be ideal if you can get the rubber). I enquired about this at Gordon Levin Tyres and he basically shook his head at me when it came to find tyres to suit a 16x7-8. I didn't think of Nitto's so i guess it'll work.

* Track, a 17x7" would be bare minimum with a 17x8" being ideal so that some nice fat 255's can fit.

Over the next 3mths i'll be looking for some new 18x8's for my daily driven wheel/tyres and then some 17x8's for my track tyres. I'll be using the 17x7's for drags or possibly just using my standard r33 16x6's depending on rubber at the time.

Lemme know how you go Brendan coz it'll be interesting to see what combination you end up with.

A little off topic, but i recently sold my 17'' wheels and got some 16s, the reason being with 235 rwkw and more in the planning normal tyres FM901 at the time would spin up whenever i planted it, the only thing worth having is a semi slick tyre, now in a 17'' wheel these are well over $300, the 225/50/16 is $230, and i can garantee that my car with these tyres will out handle any 17/18 wheel with normal road tyres, the bigger the wheel in my opinion the worse the car handles(18''+) , the tyres are so tiny that they have no room to flex which they need to do.

No, but a 16'' wheel with a better tyre than that on a 17 wheels will handle better as there is more grip avaliable. I was refering to 35 series tyres in bigger wheels when handling suffferes.

Slightly off topic but thought i'd post it anyhow, this is an email i sent to TAKwheels.com.au regarding tyres sizes etc.

> Hi,

>

> In regards to:

>

> Product: Typhoon

> Brand: TAK

> Details: Silver

> Sizes: 17x7

> Off Set: 38

> Stud Patterns: 5/114.3

>

> I was wondering what the widest tyre is that could fit onto these rims? I

> currently have a 1995 R33 GTS-T which has stock 16x6" wheels which are

> running 225/50/16's.

>

> In looking on your website at the FAQ section I noticed that you only have

> 225's on 16x7.5" and above? I have seen 17x7's with 245/45/17 rubber on them

> without any problems.

>

> The reason I ask is because A) im a mechanical novice and B) I'm looking at

> purchasing these wheels purely for trackdays so the wider the tyre the better

> (want atleast 245+ for "Semi-Slick" track tyres). Not interested about daily

> driving on normal roads as these wheels+tyres would be fitted/removed on the

> day.

>

> Any help would be appreciated,

> thanks

>

> Ben.

>

In Reply:

Ben , Legally for road purposes a 225 tyre is maximum width on a 7 inch rim

accordimg to the australian tyre and wheel assimilation guide what you are

asking is for an 8.5 to 9 inch tyre to sqeeze its shoulders in to fit on a 7

inch rim this will negatively affect handling and steering the shoulders of a

tyre must sit square withh edges of rims as a minimum anyone who says

otherwise is misinformed also a 38 offset will narrow the wheel track of your

car by around 8 mm per side also negatively affecting handling on track street

is ok but track no way

regards

Michael

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
    • BTW I measured the jack I have, it is 70mm at the saddle but you only have about 700 until it returns to 150mm high at the cylinder so it is good but no magic bullet.
    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
×
×
  • Create New...