Jump to content
SAU Community

Recommended Posts

Exedy Sports Organic single plate clutch for R32 GTR (push)

Brisbane.

New, still in box.

Just bought this, and it is not required.

Here's where it sits in the scheme of things.

Stock

HD Range

Sports Range

Then you're at twin plates... (which it turns out my car already has, hence the sale.)

$550 + freight from the cheap places online.

$500 posted from me.

0411 870 150

  • 3 weeks later...
how much kw is it meant to be able to handle?

There's blokes selling these sort of things saying 350kw, but if I had that power it'd be twin plate time for sure. I was going to have a crack at 300kw with it, had 230kw at the wheels and they said it had miles of headroom at that power level. Torque ratings here - http://www.kudosmotorsports.com/catalog/pr...;products_id=27

  • 2 weeks later...
  • 4 weeks later...

I just put one of these in My R33 GTST. I bought mine new and was told by whom i purchased it from (Kudos) the R32 GTR one is same as R33 GTST one. This might help you get a few more bites on selling it. Cheers. Any queries contact Andrew from Kudos he can confirm if needed.

Free BUMP.

+1 for these fitting straight into a R33 Gts-T. I as well bought this from Andrew from Kudos. He told me he has had many customers achieving over 270RWKW's with this clutch in R32 GTR's and said it could quite easily reach the 300rwkw mark on R33 Gts-T's. Good luck with the sale champ, Cheers :cheers:

Have one in my car. Awesome. Surprised it hasnt sold already. Hold steady you'll sell it. They are rated at around 260rwkw and are perfect for a 33Gtst

+1 for these fitting straight into a R33 Gts-T. I as well bought this from Andrew from Kudos. He told me he has had many customers achieving over 270RWKW's with this clutch in R32 GTR's and said it could quite easily reach the 300rwkw mark on R33 Gts-T's. Good luck with the sale champ, Cheers :cheers:
$450 guys! Cheap top of the range organic single brand new in the box.

Hi,

I'll call you or you can call Alex on 0433558872.450 freighted to Melb Vic. 3195 is ok by me.will send you deposit balance COD ??

cheers

Alex

Hi,

I'll call you or you can call Alex on 0433558872.450 freighted to Melb Vic. 3195 is ok by me.will send you deposit balance COD ??

cheers

Alex

Hi, all

Rang 0411 870 150. it is a wrong number. it belongs to a real estate agent !!!????

plz verify

Alex

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah I've had too many issues with knock off's on the BMW's. I don't want to do a job twice or more because the parts are shit.
    • I read this and thought "ah! I will do this scissor jack on the tow point thing!" I just use my floor/low profile/costco jack and lift the car up by the tow hook itself, then slide jack stands under. Never thought about using scissor into floor jack combo :p
    • Well, my new WMI system took much longer to finalize. I actually missed my dyno appointment last Friday and lost my 150$ deposit. I'll be going back in the next week or two.  To sum it up. I only kept the AEM tank from my old setup. I replaced the AEM pump with a higher flow/pressure ProMeth 30GPH pump. I also swapped over to a 6AN low pressure feed line to the pump from the tank. There's also a pressure switch you cannot see on the pump high pressure line.    This is feeding 6x 200CC direct port nozzles and 1x 500CC Pre Throttle body nozzle. All fittings are Swagelok, because well why not. I also have a 300PSI pressure sensor up front.    I now have my Haltech ECU controlling everything. I start my pump with a basic relay at 5PSI and deadhead it. I then PWM a 3000CC methanol Injector to control flow starting around 10psi. The pressure switch in the trunk, along with my tank level are safeties before I ever get to 10PSI, and then I use my pressure sensor upfront as a secondary safety to cut the WMI and corrections in case the injector blocks or a line ruptures.  Wish me luck on the dyno!    
    • So, I'm back with bad news. There's no jack long enough on this planet that will reach the front subframe. If by some chance there is, it would weigh 200lb's.  I purchased a long reach jack... The damn thing weighted 120lb's and was massive. Didn't even come close, was still short at least a foot. It was a pain, but I brought it back. Next I decided HA! No problem, I'll get an Extra long reach jack. Well, I couldn't lift the box... It must have weighed 160LB's and luckily there was an open box in store. I took measurement and was still nowhere close.  Sadly I've lost hope and have accepted defeat. 
    • Thanks for that tip, niZmO_Man. I think the battery is OK. It's quite a new one, but I'll check. Last time I needed a new battery, everything electronic was fine, except that there wasn't enough current to turn over the starter. I decided to order one of the partial AV system translation CDs from Car Audio Workshop in NZ. That might have some effect, or help me diagnose the date problem. 🤞
×
×
  • Create New...