Jump to content
SAU Community

Recommended Posts

Item: used HKS Hipermax II Coilovers To Suit R33 GTS-t, complete with C spanners, height adjustable with 30 rebound/bump settings

Condition: great condition - no leaks

Price: $950 - can post at buyers expense

To Fit: R33 GTS-t

Location: Qld, Brisbane

Contact: post/pm

Comments: I've done approx 10k km with them, they were in the car when I got it so total km is unknown

I'm not 100% certain on spring rates, but I think they are 7kg/mm Front and 5kg/mm Rear as per these two links.

Link 1

Link 2

I can not find any other spring rate options for ECR33.

Please note - dog is not included in sale :)

p3150106.th.jpg

Edited by sloazr33
would this fit a r34 gtt???

no, R34 GT-T have a yoke type connection on the rear shocks same as R33 GT-R and R34 GT-R.

why u selling them and what did they ride like mate

I'm selling them because I have changed my suspension setup and no longer need them. The ride is firmer than standard.

mate if u were in melbourne i woulda taken them straight away!! unless we can organize something!!!!!!!

pm sent

Item: used HKS Hipermax II Coilovers To Suit R33 GTS-t, complete with C spanners, height adjustable with 30 rebound/bump settings

Condition: great condition - no leaks

Price: $950 - can post at buyers expense

To Fit: R33 GTS-t

Location: Qld, Brisbane

Contact: post/pm

Comments: I've done approx 10k km with them, they were in the car when I got it so total km is unknown

I'm not 100% certain on spring rates, but I think they are 7kg/mm Front and 5kg/mm Rear as per these two links.

Link 1

Link 2

I can not find any other spring rate options for ECR33.

Please note - dog is not included in sale :D

p3150106.th.jpg

Is that a picture of the actual coilovers you are selling mate?Were they too stiff a ride for you on the street? They look brand spankers

if you have these in like 2 weeks to a month they are mine..

if I still have them in 2 weeks they can be yours...

Is that a picture of the actual coilovers you are selling mate?Were they too stiff a ride for you on the street? They look brand spankers

That is a picture of the actual coilovers; as per the description they are in great condition with only a few little marks and no leaks.

Interested if you can ship them to Melb but you seem to be dodging the question about how hard they are. Surely you can give us punters a reasonable idea other that "firmer than standard.

Cheers

I can post to Melbourne.

They are firmer than standard but they are not rock hard "rattle the fillings out of your teeth" type stuff.

To give you and idea, if standard is a 1 and rock hard is a 10, I would rate these as a 6.

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • 9" wheels are a little too wide for a RWD 32. They can fit. People have put R33 GTR wheels on 32s for years and years. But they are a very tight squeeze. This has been known for about 30 years. As I said - there is no difference between a 17 and an 18 in terms of what will fit. The rolling diameter needs to stay about the same as stock - not very much larger. If you increase that, you will start to have problems. If you increae rolling diamater at the same time as yo increase width, you will have problems earlier. as 9" wheels are pushing the boundaries already, you would need to be careful with tyre choice. I would put 8.5s on the front of mine, but would expect problems with 9s.
    • post up screen shots of your injector tables
    • Diagnostic flow for a code 21 says check signal at the ECU pins, on a voltmeter of some kind it should read 0.1V at idle, 0.12V cranking, 0.15-0.25V at 2000 rpm. Check each coil such that +1, -3 is infinite or very high resistance, -3, +2 should do the same. (-1, +3), (+3, -2), (+1, -2), and (-1, +2) should all be somewhere between 0 ohms and high resistance. If you trace the path from the coil pin all the way back to the ECU in the diagram the resistance you measure at the coil vs connected to the harness should be pretty much the same. 
    • I have an elite 2500 running an adapter harness on an rb25de neo r34. I took the butterfly out and removed all that junk. But I also went Plus+t at the same time. The butterfly thing works in reverse to the boost solenoid on the Gtt if that makes sense
    • yeh they are 235/45/17 up front and 255/40/17 in the rears. I still didn't get my answer if i can fit a 18x9 up front. I want to get 4 of this and see if they will fit before committing as they didn't see an 18x8 as an option but there is a 18x9.5 also.   Enkei RS05-RR 18x9 35mm ET 5x114.3 75.0 Bore Matte Gunmetal Wheel
×
×
  • Create New...