Jump to content
SAU Community

Recommended Posts

Alright guys, I've got a '94 Series 1 M-Spec R33 GTST Manual 4 door sedan. Its only got very basic mods which include:

Jasma 3inch cat back exhaust

KNN Pod Filter

Cusco Strut Brace

Tein Super Street Coilvers

17 inch Volks TE 37

Navan Spoiler

Reclinable Race Seats

Everything else is pretty much stock and mechanically A1. I heard from some guys that the 4door turbo/manual is pretty rare nowadays. I don't know how true that is, but I seldom see R33 sedans on the road. Yea I know that now is a pretty shit time to sell a car with all the prices going down compared to a few years back.

Anyway, I was wondering how much I would be able to get if I were to sell my car now. So I hope you guys out there can give me an estimate.

Link to comment
https://www.sau.com.au/forums/topic/263991-value-of-my-33/
Share on other sites

how many km? but id say you'd prob be lucky to get 10k for it, have been seeing a fair few more moded manual coupes going for round the 8k mark lately which is sad 2 say but true, ive got an r33 gtst coupe in auto, has had over 5k spent in mods i reckon id be lucky to get more than 8k for it

Link to comment
https://www.sau.com.au/forums/topic/263991-value-of-my-33/#findComment-4515363
Share on other sites

Rare because not many people want them..... :D

Id day 8 - 10k

I still can't sell mine for 13.8k and I have 254rwkw....

Damn.....doesn't look good for a few years from now when I may want to get rid of my 32.. I have 260+rwkw, rb25 etc etc.

Link to comment
https://www.sau.com.au/forums/topic/263991-value-of-my-33/#findComment-4517292
Share on other sites

i sometimes think that its better and less time consuming to just trade the car in.

My old car I could've probably sold for $9k if I could be bothered waiting for the right buyer.

Trade in value was $3k.

I sold it within 24hrs of it going on carsales for 7.5k (without RWC).

If you really want to sell your car, dump the price and get rid of it. You'll still get far more than you would from a dealer.

To the original poster: IF you find the right buyer, you could probably get $10k, but like someone else mentioned, no one wants 4 door Skylines. Even if they did want one, 4 door 33's may be rare, but 4 door 34's are nearly as common as the Coupe's, and still only $12,000-14,000.

Link to comment
https://www.sau.com.au/forums/topic/263991-value-of-my-33/#findComment-4517767
Share on other sites

My old car I could've probably sold for $9k if I could be bothered waiting for the right buyer.

Trade in value was $3k.

I sold it within 24hrs of it going on carsales for 7.5k (without RWC).

If you really want to sell your car, dump the price and get rid of it. You'll still get far more than you would from a dealer.

To the original poster: IF you find the right buyer, you could probably get $10k, but like someone else mentioned, no one wants 4 door Skylines. Even if they did want one, 4 door 33's may be rare, but 4 door 34's are nearly as common as the Coupe's, and still only $12,000-14,000.

Aight got it. Thanks for your insight!

Link to comment
https://www.sau.com.au/forums/topic/263991-value-of-my-33/#findComment-4517799
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm normally copping my own abuse from neglecting my daily drivers. "Those suspension bushes will last a bit more", "Don't worry about the oil leak, just keep topping it up". The project cars I'm always doing things slowly on them as I'm wanting them to be done better, and neater, and nicer. Luckily I don't have to deal with 18 year old Matt's "Learning to wire" stuff in the project cars. And there's only one piece of wiring I'm displeased about in the Landcruiser, and it's about to be cut out... However, the box loads of parts that have been going through this place lately for the Landcruiser... Brake pads Brake Rotors Full handbrake overhaul Wheel Bearings Seals Swivel hubs Steering Boxes Half the suspension joints Shocks Air bags (Ones to go in the rear springs for towing) Water pump Timing kit Lower timing case Harmonic Balancer Radiator Lots of other little seals and shits Gas struts for the bonnet New power window switches And god knows what else I've forgotten... Ha ha ha I have my fingers crossed the pinion seals don't start leaking on the diffs, that the transfer case doesn't leak, and the gearbox input shaft doesn't leak, nor the rear main seal. As they're about the only seals I haven't replaced in the driveline! I'm seriously eyeing off buying new caliper rebuild kits front and rear brake calipers... I'll probably recheck all the valve clearances soon too, and hopefully, it should be all good and sweet to haul some long distance trips again!
    • Every time I pull my 3x gauges out of the console and see the crack-addict way that I did the wiring, and I just can't bring myself to tear it all apart and "make it nice", because it is currently working. In fact, the last time I was in there I probably made it worse.
    • The best part is when you own the car long enough that you look back and find your OWN ham fisted amateur shit!
    • The annoying part about neglect, is when you start to replace one thing, and find ten more broken things. Ham fisted monkey repairs you normally only find out about when trying to do something unrelated! Ha ha   Neglect you can kind of anticipate the huge costs to fix it all. Ham fistedness is normally a shock the first time your work on a new old car, as everything "looked" good before.
    • For DBA, check out their guide table here. https://dba.com.au/wp-content/uploads/2023/01/Direct_Replacement-Guide-2021.2.pdf   Additionally they have some other guides and info on how to make sure you choose the right pad.
×
×
  • Create New...