Jump to content
SAU Community

Recommended Posts

So I'm offering you 15$( this is a small case of beer guys. CHEERS!) to the member who will be able to resolve my problem.

1) So, I had a hard time to wire my STRI gauges because they were blowing fuses( tried on the radio, it blow my audio fuse( 10A), So I tried on my cig ligther, it blow too ( 15A).) My problem ? The ignition wire ask too much current. So I decided to wire it with my turbo timer harness which is directly connected to the ignition keys. So, I did that: No blow fuse, everything work well.

2) So I take my gtr for a spin: No Power Windows, can't lower my windows. And all my cluster meter are down to ZERO excepting my speedo cable because it's mechanic. But after 15 minutes of driving, my speedometer went down too. So I was back with no power steering.

3) So I took my dash apart( for the 5th times this week) to realise that everything was plugged perfectly and my speedo cable wasn't broken.

I saw in the BNR32 Manual that the ENGINE COMP RELAY BOX have a 25A power Windows and a IGN SW 30A. Could it be that? how do I change it?

I wired the 4 gauges together.Should I wire 2 gauges at one place and 2 other at another place?

Sounds like you have blown the main 75A fuse in the engine bay (near the battery). These are $15 from Autobahn. Not sure what these STRI gauges you are talking about but it sounds to me like you have a short circuit in your wiring. I am a little surprised the gauges power supply doesn't come with its own inline fuse? I would highly recommend installing a fuse in the power supply. Make sure you are using a good earth and again I always recommend running the earth wire directly to ground. Don't try and find a nearby black wire which appears to be an earth wire for something else. Go directly to earth.

Hope this helps.

Cheers

Ben

So I'm offering you 15$( this is a small case of beer guys. CHEERS!) to the member who will be able to resolve my problem.

1) So, I had a hard time to wire my STRI gauges because they were blowing fuses( tried on the radio, it blow my audio fuse( 10A), So I tried on my cig ligther, it blow too ( 15A).) My problem ? The ignition wire ask too much current. So I decided to wire it with my turbo timer harness which is directly connected to the ignition keys. So, I did that: No blow fuse, everything work well.

2) So I take my gtr for a spin: No Power Windows, can't lower my windows. And all my cluster meter are down to ZERO excepting my speedo cable because it's mechanic. But after 15 minutes of driving, my speedometer went down too. So I was back with no power steering.

3) So I took my dash apart( for the 5th times this week) to realise that everything was plugged perfectly and my speedo cable wasn't broken.

I saw in the BNR32 Manual that the ENGINE COMP RELAY BOX have a 25A power Windows and a IGN SW 30A. Could it be that? how do I change it?

I wired the 4 gauges together.Should I wire 2 gauges at one place and 2 other at another place?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...