Jump to content
SAU Community

Recommended Posts

So im in the market for a 24" or 26" monitor.

Can anyone recommend me anything? My old monitor and lcd tv are samsung and so im leaning towards the brand again.

will be mainly used for graphics work, modeling and video editing as a docking station for my laptop. One thing that is a must is not having stuff stretched out on all those wide screen monitors Ive been seeing lately. I just want a true increase in realestate for all my app menu's.

Any feedback much appreciated

Cheers.

Link to comment
https://www.sau.com.au/forums/topic/264225-monitorswhats-your-poison/
Share on other sites

BenQ 2400WD (24"), perfect and it was just over $300.

You can get a similar model (16:9 though, so widescreen, mine is 16:10) from www.pccasegear.com - $319, delivery is around $15-$20.

But then if your doing graphics and so on that depends on critial super monitors, a $300-$400 24" is not what you want, your looking @ near double.

But then if your doing graphics and so on that depends on critial super monitors, a $300-$400 24" is not what you want, your looking @ near double.

+1, if you are using your monitor to do serious graphic editing work, then you are looking for a LCD that has a 8bit panel instead of the mainstream 6bit TN panels. Basically the 8bit can display a lot more shades of different colour (I read somewhere the 8bit can do ~94% of the NTSC colour spectrum compared to the typical 75% of mainstream monitors).

So im in the market for a 24" or 26" monitor.

Can anyone recommend me anything? My old monitor and lcd tv are samsung and so im leaning towards the brand again.

will be mainly used for graphics work, modeling and video editing as a docking station for my laptop. One thing that is a must is not having stuff stretched out on all those wide screen monitors Ive been seeing lately. I just want a true increase in realestate for all my app menu's.

Any feedback much appreciated

Cheers.

Just to be sure, you want a monitor that can do 1:1 pixel mapping? I.E. if you throw a 4:3 image to the screen it won't stretch it out to itself default aspect ratio (16:10 or 16:9?) but will instead keep the image at 4:3 with black bars on both sides?

The high end Samsungs & high end Dells both have this feature & are both 8bit panels. But they cost like $700+ for the 24" models.

Man that links gonna take me a while to get through..ha. thanks That benq sounds like a bargain.

thanks fellas for the input. i did abit more research into montiors after i posted and S-IPS or H-IPS pannels are the top dogs but by the looks of it they cost an arm and a leg..lol the one that keeps on popping up is the NEC 2490 but I can't seem to get a price on it but im guessing $1500 which is still abit overkill for where I'm at. Isnt it always the case that you want the best but your wallet pimp slaps you back to reality.

I'm not doing any graphics for press or videos for production so I think i can get away with just a TN pannel for now i guess, its more the increase in screen realestate that I'm after cause all the menu's on these programs I use take up a fair bit of space.

Mayuri: yeah something like that. Pretty much what my 19" is displaying but with a couple more inches in space around for me to work with if that makes any sense so no black bars.

So what should I look out for in terms of "native resolution and scaling" courtesy of the link which would probably answer my question if i read further, in terms of getting a monitor that won't "stretch" the desktop and give me true or close to 1:1 images....just native resolution or is there a particular ratio?

Gonna have to read more into colour gamut me thinks. And here i thought buying a new monitor would be easy.

You mean running a resolution thats not the monitors native?

The BenQ 24" is 1900x1200 native. So running that wont 'stretch'. Even then most programs will scale ok.

If its not business critical, the BenQ (im using it now) is about the best bang for the dollar. Next step would be the IPS Panels but as you said, they are $$$.

Spending an extra $100-$200 on a 24" that at the end of the day is a TN panel, i dont think is worth it, as its only ever gonna be a TN

yeah ive now accepted that im not gonna get anything super crash hot for my budget..ah well. As long as its decent and reliable that'll do me. Your right about BenQ, those prices are pretty darn good.

Think ill drop by harvey normal some time and have a look at some in person to get a better idea.

Thanks for the input guys

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
    • BTW I measured the jack I have, it is 70mm at the saddle but you only have about 700 until it returns to 150mm high at the cylinder so it is good but no magic bullet.
    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
×
×
  • Create New...