Jump to content
SAU Community

Recommended Posts

Hi,

I thought I'd give everyone a look at what I've been working on for the last 8 weeks, don't judge just quite yet as it's not quite completed and there is still a few final touch-ups and modifications that need to be done before sending the car off to paint. :blink:

The story starts with me having a little front end accident. I couldn't find a replacement Bomex front bar that suited or would work with the S2 Conversion that I had already purchased parts for. The project got a little out of hand with me finding a R34 Bomex kit and deciding I wanted it on my R33. Next was the decision that I wanted a S2 Vented bonnet (which until today did not exist in Blits's product range) and a set of Vented Guards.

The body repair work has already been done by Mark McHugh Bodyworks in Bundall and tomorrow they will receive the car back for paint. The body kit and bonnet fabrication was done by one of the best body kit and bonnet fabrication businesses in Australia Blits Body kits. These guys have worked tirelessly over the last month on this project making sure this car was exactly what I wanted. I have to give them a big thank you as what was initially a little project turned into a nightmare. :D .

Below are some pictures of the build.

s5fiqg.jpg

The front bar bar had to be chopped and lengthened and the top remade out of body clay and a fiberglass mould be fabricated over the top.

2eztwdh.jpg

149ulck.jpg

This was chopped in many placed to get it sitting square with the top, sides corners and many other parts needing to be modified.

op4mr5.jpg

28l9wfa.jpg

The side of the front bar needed to be chopped off and remade down that black line as did not line up with gaurd.

11i2yxx.jpg

Part of the leftovers :) .

2gvj60n.jpg

This was fun. The sides for the rear bar needed to be remade, the sideskirts had to be lengthened the ends remade and the top vent brought foward.

2ex4qo4.jpg

:) My bonnet..

1yx2qg.jpg

Will have mesh put in place shortly.

2zg6hd2.jpg

Bomex Bar with S2 Fiberglass grill being moulded to the bar for some reason it looks a bit funny in this pic.

nnmwps.jpg

Sideskirts ready to fit.

w1dwuw.jpg

All the parts ready to go on the car ;) .. Apart from the gaurds ovbiously.

2ytpjbq.jpg

im767m.jpg

ixeedy.jpg

And finally the gaurds straight out of the mould prefitted to the car.

I'll get some pics up once its been painted!.

Edited by SLYDA
Link to comment
https://www.sau.com.au/forums/topic/264333-my-r33-s1-to-s2-r34-bodykit-project/
Share on other sites

  • Replies 40
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

and itll look just like my old car... lol

I dont think they look alike at all. The fronts look completley different. This has R34 Bomex Sideskirts where as yours I believe are the R33 Bomex ones, The R34 Bomex grilldidnt look right on my R33 Especially a it having a S2 conversion so was removed and replaced with a standard S2 Grill whcih has been made one peice with the front bar, it has S2 Lights and also has a full ADR Approved vented fiberglass bonnet and gaurds, also the rear bar on mine has kept the R34 Bomex Shape and has the full side pieces with both vents.

I saw yours initially after some googling and I liked the idea of getting a bodykit on it that wasnt made for that series. I originally had a R33 Bomex kit for the S1 however it also was a 1 off and I could not find an exact replacement which made me decide to build a 1 off.

Edited by SLYDA

meh. all in all i recon its a riced out kit for a r33 i was 16 wen i did that to my car.. learnt a lot along the ways.. but each to their own i guess. godluck with it

Edited by gtrkiet

Funnily enough this was the kit that has been on it for the previous four years that was damaged also same style as whats on my car now? I dont believe myself it looks anything like it used too, let alone your car.

tan6u9.jpg

Below is the R33 S1 Bomex Kit from Monkey Warehouse, as you can see the front of my old bar is completely different and does not just drop away so suddenly. Trying to do a S2 Conversion and modifying that bar would have been stupid and would have looked dumb and I dont think it looks much better than the veilside. The kit in that picture is why Bomex is so hated on R33's, having that front bar on my car alone was enough to make me do this conversion.

ibyz3p.jpg

Edited by SLYDA

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I'm back from the dyno - again! I went looking for someone who knew LS's and had a roller dyno, to see how it shaped up compared to everything else and confirm the powerband really is peaking where Mr Mamo says it should. TLDR: The dyno result I got this time definitely had the shape of how it feels on the road and finally 'makes sense'. Also we had a bit more time to play with timing on the dyno, it turns out the common practice in LS is to lower the timing around peak torque and restore it to max after. So given a car was on the dyno and mostly dialled in already, it was time for tweaking. Luis at APS is definitely knowledgable when it came to this and had overlays ready to go and was happy to share. If you map out your cylinder airmass you start seeing graphs that look a LOT like the engine's torque curve. The good thing also is if you map out your timing curve when you're avoiding knock... this curve very much looks like the inverse of the airmass curve. The result? Well it's another 10.7kw/14hp kw from where I drove it in at. Pretty much everywhere, too. As to how much this car actually makes in Hub Dyno numbers, American Dyno numbers, or Mainline dyno numbers, I say I don't know and it's gone up ~25kw since I started tinkering lol. It IS interesting how the shorter ratio gears I have aren't scaled right on this dyno - 6840RPM is 199KMH, not 175KMH. I have also seen other printouts here with cars with less mods at much higher "kmh" for their RPM due Commodores having 3.45's or longer (!) rear diff ratios maxing out 4th gear which is the 1:1 gear on the T56. Does this matter? No, not really. The real answer is go to the strip and see what it traps, but: I guess I should have gone last Sunday...
    • 310mm rotors will be avilable from Australia, Japan, and probably a few other places. Nothing for the front can be put on the back.
    • The filter only filters down to a specific size. Add to that, the filter is AFTER the pump. So it means everything starts breaking your pump even if its being filtered out.
    • Just like in being 14mm too small (296mm) makes it not fit, being 14mm too big (324mm) it also won't fit. You want to find the correct rotor.
    • @GTSBoy Ok so that was the shops problem...they showed R33 rotors on R34 page and i did not know 296 do not fit(and are for R33) Yes i bought "kit" with rotors and pads. Pads are ok(i have GTT calipers front and rear). They have some 324mm but no 310mm. So i dont know if they would fit. I have 17inch LMGT4s So another question. Can i fit those in the rear or they are just "too" big for that?
×
×
  • Create New...