Jump to content
SAU Community

Recommended Posts

Hello once again :nyaanyaa:

I went on a hills run yesterday through Chittering with some mates. After a good 1.5 hours of revving the car hard constantly and speeds above 100km/h, we all stopped for about 30mins for a breather/etc.

My car was running right on song, engine temp was perfect, oil pressure was normal, boost all good, etc etc. I opened up the bonnet to check the engine for any other problems and saw that oil had splattered everywhere over the right hand side of the engine bay (where the turbo is). I had a quick look and could not see any leaks. I let the car cool off a bit, then we kept going.

After seeing that the car had been leaking oil i wasn't pushing as hard, although the engine kept singing, not a single thing was out of place.

I came home last night, degreased the engine bay, cleaned everything up, jumped in the pit and hand a look underneath after removing the stone guard/cover. I could not see any leak/s at all, so i'm not too sure what is happening.

My suggestion is that it is an oil leak only appearing under high pressure, i.e. driving it hard like i was yesterday.

Any of you guys got any suggestions?

As always, any help is always appreciated! :(

Link to comment
https://www.sau.com.au/forums/topic/264371-oil-leak/
Share on other sites

where was the majority of the oil gathered around? Maybe have a pic with the area circled in might help.

might just be you simply driving it hard. An oil catch can perhaps might solve the problem if you dont have any noticible leaks normally.

Link to comment
https://www.sau.com.au/forums/topic/264371-oil-leak/#findComment-4520269
Share on other sites

sure its oil leak? When i do driftday and motorkhana, i get a lot of powersteering fluid on the right hand side. They are known to leak when you are cornering hard etc. Chuck on a sock on the power steering reservoir and it should stop the spills

Link to comment
https://www.sau.com.au/forums/topic/264371-oil-leak/#findComment-4521242
Share on other sites

Would be checking your breather hoses, i would be investing in a catch can!

Yeah i've got a mate coming around in about 20min and im going to check everything under the bonnet.

How much can i pick up an oil catch can for?

Link to comment
https://www.sau.com.au/forums/topic/264371-oil-leak/#findComment-4521588
Share on other sites

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...