Jump to content
SAU Community

Recommended Posts

Hey guys,

New to the club but here is my history.

Bought R32 GTR in 2006, came with:

HKS 2530s, Seller didnt know and i didnt notice til 3 months later lol

Upgraded injectors

Twin plate ATS clutch

Trust front mount

ARC airbox.

HKS Boost controller

HKS Turbo Timer

Since then have added:

80mm AFM with pod filters

Apexi Power FC with hand controller

Aluminium radiator

Oil cooler and filter relocation kit

Relocated battery to back floor.( Dont have friends that are game enough to get in the car with me lol)

Alcon 4 piston front brakes

New head with Type B cams and stronger valve springs

HICAS locked up, and all plumbing etc removed

A/C removed and all pipework

N1 Water pump

Have had a run of bad luck though, Water pump died and cooked head, new head installed and 3 weeks later threw rod out side of block at the hairpin at Symmons.

Bought long motor to put in, decided to do a monstor build on that motor, ran out of time before the start of my car club season so purchased a complete but wrote off car, put the motor in with my brand new head and fully rebuilt turbos only to find a had an idle problem. Spent some time chasing that problem and now the oil pressure has dropped. Havent even pulled the motor out as im that annoyed lol.

Will continue building my monstor motor and will put that in bout xmas time, fingers crossed.

So yeah, atm i am twiddling my thumbs and getting some other projects out of the way, finishing my car trailers( Which i dont need anymore as i dont have a car to

tow around lol and gathering up some money to finish off the new motor.

So far for the new motor i have:

Chemically cleaned and bored block 87mm

Venolia pistons

Eagle rods with ARP Bolts

ARP main stud kit

ARP head stud kit

Sump baffle( Am thinking bout getting an enlarged sump though, something around 8 litres or so)

ACL bearings

Brand new 33 crank

Rebuilt head with stainless valves and Type B cams

Ross Tuffbond balancer

Adjustable Cam gears

Only need to get a bigger oil pump and get my turbos checked and get the whole lot balanced and screw the thing together and im laughing.

Anyways, will keep you all posted

Pointa

First motor= 11.84 1/4mile, 328 RWKW, 1min 3 at symmons

Guesty, drive harder lol

Link to comment
https://www.sau.com.au/forums/topic/265163-whats-been-happeing/
Share on other sites

Hey Michael, Damo here with the white gtr. good to see you took my advice anfd joined up, lot of info here and advice if you look, from seasoned drivers and builders. hope for ure sake you get things sorted with the gtr, see ya round. p.s mods should move this into the Tas introductions area for you.

Edited by madaz R33

Hey Michael, Damo here with the white gtr. good to see you took my advice anfd joined up, lot of info here and advice if you look, from seasoned drivers and builders. hope for ure sake you get things sorted with the gtr, see ya round. p.s mods should move this into the Tas introductions area for you.

Yeah cheers mate, still trying to work out how to put posts and stuff in the areas i want lol, will work it out eventually i spose

post-61423-1239573135_thumb.jpg

Dont let this happen to you, buy a sump baffle at the least, i shouldve built a decent motor the first time

Good to see you got two real cars

The 32 and a two door Torana.

Pity its not a Hatch is all... :)

You heading down to the kart track in Smithton this weekend for a look??

Taking my GTR out for its maiden Australian track day. (The harness mounts etc kinda give away that it was raced in Japan ;) )

Alex with the grey gtr on 20s here, whos not game enough to come for a drive haha!?

HAHAHAHAHA, very funny mate, just you wait til i have it back on the road, i will be game then, especially if we put a decent wager on it ha ha ha

Good to see you got two real cars

The 32 and a two door Torana.

Pity its not a Hatch is all... :P

You heading down to the kart track in Smithton this weekend for a look??

Taking my GTR out for its maiden Australian track day. (The harness mounts etc kinda give away that it was raced in Japan :cool: )

Yeah got 2 real cars, the 2 door torana is my baby, the 32 is just my bitch hahaha.

There is something a bit sentimental about 2 door LJ's, i think its got something to do with them beating GT falcons at bathurst, call them the underdog if you like :P

What day is the kart track day? Wouldnt mind going for a look but i got a fair bit on my plate atm, if i do go it will only be for a few hours,

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • As far as I can tell I have everything properly set in the Haltech software for engine size, injector data, all sensors seem to be reporting proper numbers.  If I change any injector details it doesnt run right.    Changing the base map is having the biggest change in response, im not sure how people are saying it doesnt really matter.  I'm guessing under normal conditions the ECU is able to self adjust and keep everything smooth.   Right now my best performance is happening by lowering the base map just enough to where the ECU us doing short term cut of about 45% to reach the target Lambda of 14.7.  That way when I start putting load on it still has high enough fuel map to not be so lean.  After 2500 rpm I raised the base map to what would be really rich at no load, but still helps with the lean spots on load.  I figure I don't have much reason to be above 2500rpm with no load.  When watching other videos it seems their target is reached much faster than mine.  Mine takes forever to adjust and reach the target. My next few days will be spent making sure timing is good, it was running fine before doing the ECU and DBW swap, but want to verify.  I'll also probably swap in the new injectors I bought as well as a walbro 255 pump.  
    • It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
    • Probably not. A workshop grade scantool is my go to for proper Consult interrogation. Any workshop grade tool should do it. Just go to a workshop.
    • In my head it does make sense to be a fuel problem since that is what I touched when cleaning the system. When I was testing with the fuel pressure gauge, the pressure was constantly 2.5 bar with the FPR vacuum removed. When stalling, the pressure was going up to 3.0 bar (which is how it should be on ignition).
    • ECUtalk pages don't mention they support the ABS computer (consult port has more than one CAN), so you might just need a different scan tool. But, I would expect ABS is a different light to the brake warning/handbrake light, do you see an ABS light come on for a few seconds when you turn the key from ACC to IGN? But since you said: I'd have a look at the ABS sensors in the rear hubs to make sure they are not damaged, disconnected etc.
×
×
  • Create New...