Jump to content
SAU Community

Recommended Posts

Guest RedLineGTR

u can do it i know about 3 people that have done it one car came from jap like it..personally i dont think ya want to traction is really a BIG issue..mates got 400rwkw and he runs it back on stock boost cos its not driveable thoe this is a high powered example but still in a rwd car its a handfull...get a gtr the u will have some traction at least...high power gtrs loose traction trust me.

Originally posted by paulr33

Speak to Jet-33 has an rb26dett r33 gtst in melbourne

he brought the car like that.

And i agree.

For the price of a GTR motor... you could re-build your own and KNOW whee it's come from.

Getting a motor from a wreaker might be flogged and only last you 12 months.

You usually only get a 3 month warranty with the motors from wreakers.

Also, if you make more power, either way you gotta spend money on, suspension, brakes etc etc.

Not worth it. Slap a 3ltr bottom end on it, bit turbo, more power and reliablity that a stock RB26.

Provided you have all the supporting elements

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That looks good, but I think you're going to need much beefier side skirts now.
    • They are daft and there's a reason it never caught on. Steering feel? We don't need no stinking steering feel!
    • I gotta pull you up on this. It's driving me crazy. A shutter is something that closes, like over a window or in a cmera. The word you want is shudder. That LSD is clearly f**ked. Take it to a diff shop and get it disassembled and examined by an expert. YOu might have plates welded together or something equally crazy.
    • Define "starting to fail". Wy not just rebuild them?
    • Check the Nistune doco. There are a few assumptions being made here that might not be valid. I will list the things that occur to me: Base map. Base map for what? Base map for Z32? Then the cranking pulse width is probably wrong for an RB25. The extra 500cc of capacity might well be enough to prevent it from catching. Base map for RB25? I don't think you can load one of those into a Z32. You have to just make the settings correct for an RB25 in the Z32 base map. That is either K or the TIM to get the pulsewidth right. Loom. You bought a loom for an RB. And you plugged it into a Z32 ECU. Did you make sure that any iwre differences were swapped. From memory, there's at least a couple. And as per the others, I would suggest making sure that the fuel pressure is correct while cranking and that the injectors are actually flowing as expected. They really must come out and go on the bench, unless you do find that you have messed up as per above points. I would also suggest watching in Nistune to make sure that everything is reading correctly. That the correct binary flags are raised at the right time (like the crank signal), that there's no stupid values in K or TIM. That you have not got mismatched firmware for the ECU and/or a wrong image loaded.
×
×
  • Create New...