Jump to content
SAU Community

Recommended Posts

there's an apexi unit in the car atm, so no troubles with the main harness and plugging that in as its a direct replacement..

just cant find the two wires i need to splice onto from the handbrake..

can someone tell me how to get to these two wires and what they look like ?

any help is appreciated, cheers

Link to comment
https://www.sau.com.au/forums/topic/265278-greddy-turbo-timer/
Share on other sites

If you do not connect these wires to the handbrake then turbo timer will not turn the engine off if the handbrake is disengage thus if some1 breaks into your car while the car is running by the turbo timer they can still drive the car(although the steering lock would engage)

if the turbo timer is set up with the alarm this step can be skipped

some alarm will automatically turn off the turbo timer if someone puts their foot on the acclerator or any other pedals for that matter.

But either way the steer lock will engage like it was mentioned above.

so i hooked it all up, aside from the park brake wire because i still cant find it, will try in daylight 2moro.

question for anyone using these, does yours beep every second it counts down? at the moment mine is, and inbetween displaying every second of the countdown, it shows [ S i D ] is this all just because its not recognising the brake as being applied and a warning?

Same.. i have a greddy turbo timer... no SiD here..

Sound can be turned off... show me a pic of your turbo timer and ill let you know if its the same as mine... As i have the manual for my turbo timer..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...