Jump to content
SAU Community

Question About Apexi Power Fc

quick 33

By quick 33,
in Queensland

 Share

Recommended Posts

quick 33 Apprentice

quick 33

Posted
Posted

hey people i just got a quick question ? , iv got a r33 series 1 and iv had the chance to buy a apexi power fc that is coming out of a series 2 and i was wondering if it can be remaped to suit my series 1 and if so can it also be set back to defalt for a retune ?

can someone help me please ;-)

Link to comment
https://www.sau.com.au/forums/topic/265389-question-about-apexi-power-fc/
Share on other sites
sunnycoast Experienced

sunnycoast

Posted
Posted

It will work with no problems at all. As long as its for the same make "R33" (and the same engine) e.g. RB25DET and the car is Manual.

Also, you can reset the tune easily from the menu. Will need a tuner to retune for your mods down the track if you require.

Chris

Parag0n Mentor

Parag0n

Posted
Posted
^^^^

what he said. the instal is as simple as unplugging your ecu and plugging the power fc in. then would recommend taking it to a workshop and getting it tuned for your car

Disconnect the negative terminal on your battery before you f**k around with the ECU.

blur Proficient

blur

Posted
Posted

Im pretty sure s1 and s2 computers are different, got to do with ignitor and coilpacks being different. Check with an online parts supplier like nengun ect and see if theres different part number for the PFC ecus.

Col-GTSX Grand Master

Col-GTSX

Posted
Posted

Actually Mark Apexi used to have two different model numbers for the Apexi PFC for the S1 & S2...

However on closer inspection they were infact the same unit...

They made two different model numbers on their list to reduce the number of enquires from people asking if there were specific ecu's for the S1 & S2...

Hence the cause of this common question or assumption that there are two units in the standard pfc for the R33 (rb25det models)...

They would have been better off just changing the product description to say "suits S1 & S2" which is what they did in the end...

Bit of usless knowledge for ya...!

quick 33 Apprentice

quick 33

Posted
  • Author
Posted
Haha..was getting a little worried. Allot of noise about nothing!!! Happy i was still correct! :P

ok nice so i found out that it is coming out of an r33 rb25det 5 speed manual ( the same as mine ) but i also found out the that the car its comming out of is heavly moded ( he used to race it )

so will the tune thats in the pfc @ the moment get me to the tuner without breaking anything cause even though my cars moded its nothing like the car its comming out of ?????

thanks.

sunnycoast Experienced

sunnycoast

Posted
Posted
ok nice so i found out that it is coming out of an r33 rb25det 5 speed manual ( the same as mine ) but i also found out the that the car its comming out of is heavly moded ( he used to race it )

so will the tune thats in the pfc @ the moment get me to the tuner without breaking anything cause even though my cars moded its nothing like the car its comming out of ?????

thanks.

Thanks for your question. Happy to help.

When the PFC comes out of the "heavily modified" car, I would suggest you don't install this, as it would be using the same tune. (which could be dangerous if he's got increased timing, cam adjustments, injector duty etc).

Your best idea would be to take the PFC with you to your tuner and get him to install it...Takes around 5 minutes max. Very easy.

He (or she), will be able to do this for you.

Also, for my info....where are you looking to tune? My money is on Matty Spry.

Cheers and good luck.

Chris

quick 33 Apprentice

quick 33

Posted
  • Author
Posted
Thanks for your question. Happy to help.

When the PFC comes out of the "heavily modified" car, I would suggest you don't install this, as it would be using the same tune. (which could be dangerous if he's got increased timing, cam adjustments, injector duty etc).

Your best idea would be to take the PFC with you to your tuner and get him to install it...Takes around 5 minutes max. Very easy.

He (or she), will be able to do this for you.

Also, for my info....where are you looking to tune? My money is on Matty Spry.

Cheers and good luck.

Chris

im actually in maryborough QLD ( so just down the road for you) and i was thinking of taking it to Brad Smith in hervey bay , he tuned my first r33 i had and it was moded to the hilt and he did a pretty good job of it unless you no of some one in my area that is better ?

45ULT Rising Star

45ULT

Posted
Posted
ok nice so i found out that it is coming out of an r33 rb25det 5 speed manual ( the same as mine ) but i also found out the that the car its comming out of is heavly moded ( he used to race it )

so will the tune thats in the pfc @ the moment get me to the tuner without breaking anything cause even though my cars moded its nothing like the car its comming out of ?????

thanks.

it depends on how different the set up on the other car is to yours? mainly injector sizing.. as your only planning on driving to the tuner and not racing it lol. however if it was my car or one i was working on i'd reset the power fc to the base map just to be safe. depending on if your running bigger injectors u'll need to trim that down then it should run fine.

PWND Grand Master

PWND

Posted
Posted

the far safe option is to just drive the car to the shop and install the pfc there. it only takes about 30 seconds. remove kick pannel, unplug computer, plug pfc in. done. why drive it untuned when it's far simpler just to drive the car with the stock computer and do it at the workshop

45ULT Rising Star

45ULT

Posted
Posted
the far safe option is to just drive the car to the shop and install the pfc there. it only takes about 30 seconds. remove kick pannel, unplug computer, plug pfc in. done. why drive it untuned when it's far simpler just to drive the car with the stock computer and do it at the workshop

might have larger than standard injectors, z32 afm?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • sunsetR33
      Blue/grey smoke after idle

      By sunsetR33 · Posted

      Can't you put the pistons to TDC and then do the valve seals? Or will the drop down too far to pull them back up?
    • sunsetR33
      Replacing turbo water line - any recommendations or advice?

      By sunsetR33 · Posted

      One thing I can tell you is, do it properly the first time. If you encounter unexpected problems just let the car sit for a week or two if you have to get some other parts or figure stuff out.  I'd have said go and use as many OEM parts as possible but since you want to change the turbo later on a custom kit is probably the better choice. Since I have no experience with RB25 just compare parts diagrams and images before buying a line kit and it should be easy to see if it has everything you need. Amayama has very good parts diagrams and part number lists, that is what I used a bunch to figure out what I might need. And don't forget to plan ahead and possibly renew other stuff that's easy to get to while you're in there doing the turbo lines. Happy wrenching
    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      Update 4:   Hi all, good news. Engine is running and all the gaskets and seals seem to be working as intended. No leaks so far, even the JB Weld seems to hold. I flushed out the old coolant a few times and put in fresh coolant, not Nissan stuff, I decided to try the Ravenol Protect FL22, they claim it works for a wide variety of JDM cars and the opinions on it by some people were pretty good. And it has the nice poison green color! And man am I glad I bought a coolant system tester earlier this year, vacuum filling works wonders on this engine. I can definitely recommend this to anyone still doing it the old school way. All you need is compressed air supply. Will have to do a small test drive as soon as I can, I removed the gauge cluster again as the tacho needle was still bouncing around a bit but it was much better than before already.  I also found some cracks on all 4 tires inner and outer sidewalls. Apparently these tires should 't be parked on for extended periods or be kept under 0 degrees during storage, which I did not know. Clearly the previous owner didn't look into those details either, he probably bought them just cause they are cool semi-slicks. I'm just wondering how tf I am supposed to reach 30-80 degree tire temperatures on the public road consistenly, these tires were never going to work for my use case. I'll probably order Continental SportContact7 ones as these are the best allround summer tire available right now and I don't think I'll need anything crazier for now. Do let me know if you have experience with various tires and which ones you recommend.
    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      You have no idea how many goddamn boxes I received these past three months haha Most have been put to use by now though, luckily
    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      Not going to pretend I didn't do a bit of junky work this time around, but mostly due to the fact that some things I am not willing to spend days fixing right now, like wiring. I try to do most things properly the first time around.
×
×
  • Create New...