Jump to content
SAU Community

Recommended Posts

Hi guys;

I have recently pulled down a running RB26 motor out of a 32 due to some parts being sold. So I am offering the SAU guys firts dibs at getting their hands on the goods. The parts are good if not in excellent condition and the motor was a runner with no problems.

If you are interested in the parts you can email me at [email protected] or call 0400262578 for more info or pics. Can organise delivery at buyers expense.

PARTS LIST

-stock fuel rail/regulator + injectors $150

-intake manifold collector $100

-throttle body chambers $300

-intake manifold assay $300

-R32 ECU $100

-rb26 head $1200

NOTE* contains valves,lifters,head bolts,stock cams+wheels and HKS spark plugs

-rb26 block $300

NOTE* contains oil and water pumps,idler pulleys and timing belt

-bare rb26 sump $200

NOTE* no gears

-rb26 stock cam wheel cover $50

-rb26 starter motor $50

-rb26 stock turbos $500 the pair

NOTE*there is no wheel play or oil leaks

contains exhaust manifold,dump pipes,O2 sensors and intake piping

-blitz dual stage boost controller $200

NOTE* has wiring and hoses + conections

-OS Giken twin plate clutch + flywheel $600

-32 crank, rods and pistons $500

you can view the picks on this link http://s621.photobucket.com/albums/tt298/h...mview=slideshow

Ps I am located in Adelaide, South Australia.

Link to comment
https://www.sau.com.au/forums/topic/265553-rb26-engine-parts-sale/
Share on other sites

  • Replies 58
  • Created
  • Last Reply

Top Posters In This Topic

Once again guys I have a N1 replica front bar for a R33 that has been preped and has a base coat ready for final wet rub and paint going for $200. If anyone is keen pm me.

Once again guys I have a N1 replica front bar for a R33 that has been preped and has a base coat ready for final wet rub and paint going for $200. If anyone is keen pm me.

Pretty sure the prices are the cheapest compared to others for these quality parts. PM me if you are interested!!!

Starter motor SOLD.

Parts still available for those interested. pm me.

Intake manifold collector

throttle body chambers

intake manifold assay R32 GTR computer

Stock cams

Head(no covers)with cams and wheels

Block

4WD sump(no gears)

cam wheel cover(stock)

Turbo's includes all exhaust manifold piping and induction piping

OS Giken twin plate clutch

32GTR crank,rods and pistons

ALL ABOVE PARTS ARE FROM A LATE MODEL 32GTR

also on offer is a N1 lookalike front bar for gtst R33 $200

Centre grill for R33 gtst (silver in colour) $80

Edited by huli
Starter motor SOLD.

Parts still available for those interested. pm me.

Intake manifold collector

throttle body chambers

intake manifold assay R32 GTR computer

Stock cams

Head(no covers)with cams and wheels

Block

4WD sump(no gears)

cam wheel cover(stock)

Turbo's includes all exhaust manifold piping and induction piping

OS Giken twin plate clutch

32GTR crank,rods and pistons

ALL ABOVE PARTS ARE FROM A LATE MODEL 32GTR

also on offer is a N1 lookalike front bar for gtst R33 $200

Centre grill for R33 gtst (silver in colour) $80

You can view the picks on linked site http://s621.photobucket.com/albums/tt298/h...mview=slideshow

Edited by huli
interested in the turbos, manifolds, intake piping, dumps. how much for delivery to melbourne?

Due to the weight of the turbos(14-15Kg each) have to send separately for $60

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So stock ECU does not like anything above 10 psi?  That Nistune one is just for "try" if it will be any different, I know it need to be tune for that. I know but YOU may know about these problem but i/we dont. They few little Skylines here let alone people who know anything about tham so that is why iam asking here  
    • So now we have a radiator with no attachments whatsoever. It lifts up with a particularly tight spot between the drivers side air box mount and the lower radiator outlet, but if you've got this far you will sort that too. This is the lower mounts with the rad out so you can see where the rubber bushes go, it is a straight shot upwards Done! Assembly is the reverse of disassembly, with blood less likely to be shed.
    • Right, onto the second last trick. The Air Con condenser is mounted to the front of the radiator and stays in the car when the radiator is removed. There are 2x 10mm headed self tappers holding the top of the condenser to the radiator, remove those The bottom of the condenser is attached to the radiator with clips. You need to lift the condenser out of those clips and clear (up, then forward). f**ked if  could work out how to do that last bit with the front bumper on. I hope you can, and you share the trick.  Bumper removal probably deserves its own thread one day once I've recovered the will to live, but basically you need to remove the wheels, front inner guard liners (clips and 10mm headed bolts), the self tapper between the guard and the bumper at the rearmost point of the bumper (same as an R32 that bit), any remaining clips at the top/front of the grill, an absolute bastard design with a plate that holds the top of the bumper above the headlight each side (only 1 bolt which is tricky to get to, but the plate catches 2 places on the bumper and must be removed....carefully!) and push clips between the bumper and guard under the headlight. If you've done all that you will be faced with wiring for the fog lights on both sides and in ADM Q50 RS at least, 4 nasty tight plugs on the driver's side for the ADAS stuff. So, the clips at the bottom look like this on drivers side (looking from the front) And on the passenger side (also from the front), you can see this one is already out Clearance on both of these are super tight; the condenser needs to move up but the upper rad support mount prevents that, and the radiator can't move down far because it is (rubber) mounted. Once you achieve the impossible and drop the condenser off those mounts so it does not stop the rad moving, you are good to go
    • OK, next the shroud needs to come off and there are a couple of tricks. Firstly, there is a loom from near the passenger side headlight to the fans, coolant temp sensor etc and there is no plug to undo.  In my case I was OK to leave the shroud on top of the engine so I just undid the passenger side fan plug and about 10 of the clips which gave enough free wire to put it aside. The fan plugs were super tight, the trick I used was a small falt screwdriver to push down on the release tab, then a larger flat screwdriver to lever the plug out of the fan unit....be careful with how much force you apply! If you need to remove the shroud altogether for some reason you will have to deal with all the plugs (tight) and clips (brittle)....good luck. I removed all of the clips and replaced them with cable ties that I will just cut next time. Also, in the Red Sport / 400R at least, the intake heat exchanger reservoir hose is bolted to the shroud in 2 places with 10mm headed bolts; so remove them (the hose stays in the car; no need to undo it at the t fittings down at the radiator lower mount. Once you've dealt with the HX hose and the wiring loom, there are 3x 10mm headed self tappers holding the top of the shroud to the radiator; remove those.   The shroud then lifts out of the bottom mounts where it sits on the radiator, up and onto the engine out of the way. Simples
    • Ok, disregard my “rate them” comment, sorry for my unrealistic input
×
×
  • Create New...