Jump to content
SAU Community

Recommended Posts

Hi guys;

I have recently pulled down a running RB26 motor out of a 32 due to some parts being sold. So I am offering the SAU guys firts dibs at getting their hands on the goods. The parts are good if not in excellent condition and the motor was a runner with no problems.

If you are interested in the parts you can email me at [email protected] or call 0400262578 for more info or pics. Can organise delivery at buyers expense.

PARTS LIST

-stock fuel rail/regulator + injectors $150

-intake manifold collector $100

-throttle body chambers $300

-intake manifold assay $300

-R32 ECU $100

-rb26 head $1200

NOTE* contains valves,lifters,head bolts,stock cams+wheels and HKS spark plugs

-rb26 block $300

NOTE* contains oil and water pumps,idler pulleys and timing belt

-bare rb26 sump $200

NOTE* no gears

-rb26 stock cam wheel cover $50

-rb26 starter motor $50

-rb26 stock turbos $500 the pair

NOTE*there is no wheel play or oil leaks

contains exhaust manifold,dump pipes,O2 sensors and intake piping

-blitz dual stage boost controller $200

NOTE* has wiring and hoses + conections

-OS Giken twin plate clutch + flywheel $600

-32 crank, rods and pistons $500

you can view the picks on this link http://s621.photobucket.com/albums/tt298/h...mview=slideshow

Ps I am located in Adelaide, South Australia.

Link to comment
https://www.sau.com.au/forums/topic/265553-rb26-engine-parts-sale/
Share on other sites

  • Replies 58
  • Created
  • Last Reply

Top Posters In This Topic

Once again guys I have a N1 replica front bar for a R33 that has been preped and has a base coat ready for final wet rub and paint going for $200. If anyone is keen pm me.

Once again guys I have a N1 replica front bar for a R33 that has been preped and has a base coat ready for final wet rub and paint going for $200. If anyone is keen pm me.

Pretty sure the prices are the cheapest compared to others for these quality parts. PM me if you are interested!!!

Starter motor SOLD.

Parts still available for those interested. pm me.

Intake manifold collector

throttle body chambers

intake manifold assay R32 GTR computer

Stock cams

Head(no covers)with cams and wheels

Block

4WD sump(no gears)

cam wheel cover(stock)

Turbo's includes all exhaust manifold piping and induction piping

OS Giken twin plate clutch

32GTR crank,rods and pistons

ALL ABOVE PARTS ARE FROM A LATE MODEL 32GTR

also on offer is a N1 lookalike front bar for gtst R33 $200

Centre grill for R33 gtst (silver in colour) $80

Edited by huli
Starter motor SOLD.

Parts still available for those interested. pm me.

Intake manifold collector

throttle body chambers

intake manifold assay R32 GTR computer

Stock cams

Head(no covers)with cams and wheels

Block

4WD sump(no gears)

cam wheel cover(stock)

Turbo's includes all exhaust manifold piping and induction piping

OS Giken twin plate clutch

32GTR crank,rods and pistons

ALL ABOVE PARTS ARE FROM A LATE MODEL 32GTR

also on offer is a N1 lookalike front bar for gtst R33 $200

Centre grill for R33 gtst (silver in colour) $80

You can view the picks on linked site http://s621.photobucket.com/albums/tt298/h...mview=slideshow

Edited by huli
interested in the turbos, manifolds, intake piping, dumps. how much for delivery to melbourne?

Due to the weight of the turbos(14-15Kg each) have to send separately for $60

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Reading through the engine service manual their advice is do a cylinder balance test. Unplug one injector at a time and see if the idle drops a consistent RPM. You can also do this using a Consult cable which is easier. They also call for unplugging the power transistor, then with the engine off and the fuel rail unhooked from the manifold verifying that you have good fuel flow (even injection, no dripping/leaks, etc) when you twist the CAS by hand. Also verify the spark by pulling the spark plugs and allowing the plugs to ground and turning the CAS by hand. I would also start doing the sensor checks and idle valve checks in service manual. Make sure the MAF tests reasonably, the intake air regulator is sane, etc. You may have to get new spark plugs.
    • This sounds very old of me, however since buying the Tiguan shit box, my view on shit boxes have changed.
    • I've looked up the parts number (41011AL501). It's around $700 OEM. Usually our Infiniti G35 here in Canada have interchangeable parts with my Stagea but the parts number are not the same. I have looked around and it seems the JDM 2005 V35 Skyline (which is the same as our G35) has the same caliper but I cannot confirm. And I can't find a repair kit. The inner brake pads drags on the rotor, seems to be rusty piston. Thanks for the info by the way
    • This coupled with 6-9 speed autos with ridiculously short gearing is why these modern shitbox cars always seem so fast off the line. If it wasn't for those things, Raptors would not seem fast. The problem we have is there is a driveability gap between a more gentle take off and a wheelspinning sideways launch. The difference between ankle flex required to achieve one and ankle flex required to achieve the other is about 0.5°.
    • Yeah I think I'm also with the opposite here. It's 'hard to keep up with traffic' because in the real world I'm accelerating with 15% throttle and they are pinning it. It feels like I'm being an overt dickhead at anything above 15% throttle, so the car sounds like I'm being an overt dickhead to keep up with/get ahead of traffic when I'm really just trying to drive with traffic. There would be no issue 'keeping up with traffic' if we used the same level of throttle input/aggression to drive around. People really do just drive around with their foot nearly pinned in econoboxes.
×
×
  • Create New...