Jump to content
SAU Community

Recommended Posts

Hi guys;

I have recently pulled down a running RB26 motor out of a 32 due to some parts being sold. So I am offering the SAU guys firts dibs at getting their hands on the goods. The parts are good if not in excellent condition and the motor was a runner with no problems.

If you are interested in the parts you can email me at [email protected] or call 0400262578 for more info or pics. Can organise delivery at buyers expense.

PARTS LIST

-stock fuel rail/regulator + injectors $150

-intake manifold collector $100

-throttle body chambers $300

-intake manifold assay $300

-R32 ECU $100

-rb26 head $1200

NOTE* contains valves,lifters,head bolts,stock cams+wheels and HKS spark plugs

-rb26 block $300

NOTE* contains oil and water pumps,idler pulleys and timing belt

-bare rb26 sump $200

NOTE* no gears

-rb26 stock cam wheel cover $50

-rb26 starter motor $50

-rb26 stock turbos $500 the pair

NOTE*there is no wheel play or oil leaks

contains exhaust manifold,dump pipes,O2 sensors and intake piping

-blitz dual stage boost controller $200

NOTE* has wiring and hoses + conections

-OS Giken twin plate clutch + flywheel $600

-32 crank, rods and pistons $500

you can view the picks on this link http://s621.photobucket.com/albums/tt298/h...mview=slideshow

Ps I am located in Adelaide, South Australia.

Link to comment
https://www.sau.com.au/forums/topic/265553-rb26-engine-parts-sale/
Share on other sites

  • Replies 58
  • Created
  • Last Reply

Top Posters In This Topic

Once again guys I have a N1 replica front bar for a R33 that has been preped and has a base coat ready for final wet rub and paint going for $200. If anyone is keen pm me.

Once again guys I have a N1 replica front bar for a R33 that has been preped and has a base coat ready for final wet rub and paint going for $200. If anyone is keen pm me.

Pretty sure the prices are the cheapest compared to others for these quality parts. PM me if you are interested!!!

Starter motor SOLD.

Parts still available for those interested. pm me.

Intake manifold collector

throttle body chambers

intake manifold assay R32 GTR computer

Stock cams

Head(no covers)with cams and wheels

Block

4WD sump(no gears)

cam wheel cover(stock)

Turbo's includes all exhaust manifold piping and induction piping

OS Giken twin plate clutch

32GTR crank,rods and pistons

ALL ABOVE PARTS ARE FROM A LATE MODEL 32GTR

also on offer is a N1 lookalike front bar for gtst R33 $200

Centre grill for R33 gtst (silver in colour) $80

Edited by huli
Starter motor SOLD.

Parts still available for those interested. pm me.

Intake manifold collector

throttle body chambers

intake manifold assay R32 GTR computer

Stock cams

Head(no covers)with cams and wheels

Block

4WD sump(no gears)

cam wheel cover(stock)

Turbo's includes all exhaust manifold piping and induction piping

OS Giken twin plate clutch

32GTR crank,rods and pistons

ALL ABOVE PARTS ARE FROM A LATE MODEL 32GTR

also on offer is a N1 lookalike front bar for gtst R33 $200

Centre grill for R33 gtst (silver in colour) $80

You can view the picks on linked site http://s621.photobucket.com/albums/tt298/h...mview=slideshow

Edited by huli
interested in the turbos, manifolds, intake piping, dumps. how much for delivery to melbourne?

Due to the weight of the turbos(14-15Kg each) have to send separately for $60

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Put a fuel pressure gauge on it. Replace the turbos. Probably completely separate issues.
    • What copper washer do you guys use on the bleeder bolts? The existing one I have I had no idea where to find it in a local store, I did buy some online but that are only 1mm thick whereas my old one is 2mm+ thick and when I put the new washer out and squeeze the top radiator hose I can hear a bit of air but not with the old one. Does this matter? The new one doesn't leak, but the inner diameter is a bit loose whereas the old one threads on the bolt.
    • Howdy all, after being out a few weeks ago on a spirited drive in my GTR I have 2 issues that oddly have appeared at the same time. Whilst accelerating quickly through the gears all of a sudden i’ve lost power at the top of third gear (below redline around 6000rpm) for no obvious reason.    From that point onwards the car has been running rich on idle, won’t really rev under load without a ton of black smoke and the odd backfire, and dying as a pull up to a set of lights unless I keep the revs up around 1500rpm. In addition when shutting down the car that same night (I was 10 minutes from home) I noticed one of the turbos was significantly noisy on wind down when shutting off the engine. After letting the car cool down overnight it starts up fine, although once it gets to temp the revs start to creep up and down, the exhaust is darker than it should be and it also sounds like it’s running rich (fat note) I’ve put a new set of plugs in it - no change, the old plugs all seemed OK with two of them being somewhat richer/fueled up than the other 3 with 1 being borderline. I’ve smoked tested the intake system via the front of the Turbos, found a split vacuum hose going to the factory boost gauge sender, which I have since replaced.  Also found another leak on the gasket coming off the rear turbo outlet, have also replaced this. After fixing both of these leaks - still have the running rich issue. I’ve also tried another pair of AFM’s - no change here After pulling off the front turbo intake pipes, there is obvious shaft play in the front turbo, which now hisses loudly on light revvs although I can’t see why this would make the car run funny even under idle. I’m curious to know why it’s running rich before I potentially replace/rebuild turbos. The car is completely stock <50,000kms  other than an exhaust. Oil and coolant are all clear. I haven’t bothered with coil packs as it looks like they won’t be the issue due to condition of the plugs. Any help appreciated as I cry myself to sleep!
    • No probs at all. I used to love trying to dig up obscure info for those in need where possible going back 20+ years on SAU.  I did have another look and couldn't come up with any closer match. I'm leaning towards those skirts in your first pic are custom fitments, cut down/extended or from another car entirely and modded to fit an R34 sedan. I would've thought someone in Japan had them and taken a photo at some stage over the last 2 decades but there's nothing. Someone out there must know surely.
×
×
  • Create New...