Jump to content
SAU Community

Swapping 17inch Bronze Te37s With Tyres

bin
 Share

Recommended Posts

bin Community Regular

bin

Posted
Posted (edited)

Item:VOLKS TE37 17Inch Bronze

Condition: All 4 wheels have gutter rash. (came like that with the car)

Front Tyres: Gemstone 215/45/17 with 90%tread

Rear Tyres: Federal 595 RS semi slicks 235/45/17 with 80% tread

Rears are wider than the front by 1 inch.

Offset fits R33 GTST perfect. Not sure about the widths though.

Ok so heres the deal, I'm looking to swap for a decent looking set of 18s WITH decent amount tread on tyres.

The 18s must fit an R33 GTST. Would prefer to swap in person in Sydney.

Post up pics of the rims you wanna swap me or just pm me. Pics of the rims on my car are attached below.

Feel free to give me a call at 0433 712 092.

post-55566-1240018688_thumb.jpg

Edited by bin
~Hypnotik~ Rising Star

~Hypnotik~

Posted
Posted

You won't have any luck unless you post up the widths and offsets. Look inside the wheel, there should be a sticker on the inner rim with the size and offset, otherwise it will be stamped onto the back of the hub

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      R32 gtr transmission strength, billet plate

      By GTSBoy · Posted

      Just put skinny tyres on it.
    • cosline
      R32 gtr transmission strength, billet plate

      By cosline · Posted

      Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • Piggaz
      R32 gtr transmission strength, billet plate

      By Piggaz · Posted

      You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • MBS206
      R32 GTS (RB20DE) Injectors Replacement

      By MBS206 · Posted

      Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • The Bogan
      NC MX5

      By The Bogan · Posted

      So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...