Jump to content
SAU Community

R34 Gt-t Triptronic

Akis
 Share

Recommended Posts

Dal34 Collaborator

Dal34

Posted
Posted

Gearbox

Gearbox cross member (As may be different to auto)

Tailshaft / Front yoke (As may be different to auto)

Speedo cable (As may be different to auto)

New clutch

Flywheel n bolts

Clutch Slave cylinder

Clutch Master cylinder

Clutch fork

Clutch hose (slave cylinder) and pipe from clutch to master cylinder

Pedals both clutch and brake ( auto pedal is to big to fit with clutch)

Manual ECU

Leather gear stick boot and plastic surround

Keep in mind I haven't done it yet...will go in once the VQ is ready.

john-e boi Mentor

john-e boi

Posted
Posted
Ok so i have 2 ways, 1 go manual and use a standalone, 2 install a shift kit and use standalone, i want to know the costs of those 2.. though the 2 requires a rebuilt in the transmition.. Ok i will search for these..

Thank you all!!

You are very quick and full of informations! :thumbsup:

manual conversion then you have to change your wiring. plugs to the ecu wont suit a powerfc or any other standalone. from what i know anyways

STATUS Grand Master

STATUS

Posted
Posted
Hi all,

I was searching the forum but found nothing that clears what standalone can be used as plug and play to a R34 GT-t with triptronic, can you please help me.. I want to select the right standalone..

Thank you

Akis.

best bet is to remap the std ecu, we do dozens and im sure someone could help you out.

www.nistune.com

  • 3 months later...
Fastrotor Proficient

Fastrotor

Posted
Posted

Speak to Satanic on here.... Pm him ..... he has a close to 400 rwkw AUTO R34 ...... it runs an F-con pro (i think) ...anyway, it knows when the auto is about to shift and softens up the power to make smoother shifts etc .... best to speak to him, but it works very well.... and you can't dispute close to 400 rwkw !

Gary

  • 2 months later...
sidewinder11 Contributor

sidewinder11

Posted
Posted
Speak to Satanic on here.... Pm him ..... he has a close to 400 rwkw AUTO R34 ...... it runs an F-con pro (i think) ...anyway, it knows when the auto is about to shift and softens up the power to make smoother shifts etc .... best to speak to him, but it works very well.... and you can't dispute close to 400 rwkw !

Gary

:blush:

Hank Scorpio Grand Master

Hank Scorpio

Posted
Posted

Bit of an old thread but....

Haltech and ViPec then work on an auto R34 GT-T? I'm looking at getting a new ECU, tune whatever and wanna keep my auto box. I don't wanna f*ck around with a manual gearbox conversion (not to mention I'll be paying ~$2000 to put R33 parts into my R34), I may aswell sell up and buy something thats manual (from my POV).

However if I build up the Auto box then I can run whatever the hell I want? Apexi, Motec, etc. Whats required in building up the auto and how much will that set me back?

So I believe my options are...

1) Haltech, ViPec, Nistune or E-manage.

2) Build the box up and run whatever ECU I like.

Is this correct? I've done so much searching on the subject my head is spinning!

666DAN Grand Master

666DAN

Posted
Posted
Bit of an old thread but....

Haltech and ViPec then work on an auto R34 GT-T? I'm looking at getting a new ECU, tune whatever and wanna keep my auto box. I don't wanna f*ck around with a manual gearbox conversion (not to mention I'll be paying ~$2000 to put R33 parts into my R34), I may aswell sell up and buy something thats manual (from my POV).

However if I build up the Auto box then I can run whatever the hell I want? Apexi, Motec, etc. Whats required in building up the auto and how much will that set me back?

So I believe my options are...

1) Haltech, ViPec, Nistune or E-manage.

2) Build the box up and run whatever ECU I like.

Is this correct? I've done so much searching on the subject my head is spinning!

As covered before, the Haltch and Vipec WON'T run the Auto box, the auto logic is inside the stock ECU. HOWEVER everyone that is saying it will work has probably seen it work on an R33 or similar where the auto logic is controlled externally to the factory ECU, so you can stick a standalone in those cars...NOT the R34 GTT (even the tiptronic R34 25GT will work with standalone, it had to be different)

Nistune is the most simple and effect option, the remaps really are good. I've got a different type of board, but I can play with ever facet of the tune adn retain the factory ECU and shift logic.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Dose Pipe Sutututu
      What brakes on R34 GTT(Europe)

      By Dose Pipe Sutututu · Posted

      Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • soviet_merlin
      WGNC34 - floor mats

      By soviet_merlin · Posted

      Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • joshuaho96
      Tomei gasket

      By joshuaho96 · Posted

      I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
×
×
  • Create New...