Jump to content
SAU Community

Recommended Posts

Just came across this during a google search, thought somepeople may find it interesting :)

http://www.nissan-global.com/EN/NEWS/2001/.../011016-01.html

Gives information on the model and what is different with the ARX, i.e. ride height etc.

Link to comment
https://www.sau.com.au/forums/topic/266533-m35-press-release/
Share on other sites

yes that would be right, its also possible the gearbox is 'programmed' to output a different signal

or it would get the speed from the ABS computer via its sensors which are already programmed with the rolling diametre of the relevant car.

Edited by zei20l

it's nothing really

just thinking of changing my cluster to a RX or RS model so i can run lower profile tyres when i lower the car

You could probably get the Nismo cluster in there. I believe that was designed with the RS/RX in mind.

Vaguely recall reading that it is calibrated for 18/7.5/45... ie the LMX5's

wait for the dollar to get better, IF it ever does

Yeah man, me too.

S l o w l y getting there.

Can have a Nismo suspension kit sent over for a bit less than $2k atm. No good for ARX though.

HKS Hipermax maybe Danny?

just like i said :blink:

would be good to find a written off ARX we could part up.... i know where andy lives!

Ok, I've been thinking about it, let's go borrow Andy's diff centre lol ;)

I'll have to keep my eye on the wrecker's incase one comes in, I might check if NissWreck will bring one in for me :) Their next container isn't due for a few months however :wub:

I'm sure between us all including the ARX owner's we could buy nearly the whole car up :)

i wouldnt mind the nismo, add some sway bars and it will handle nicely!

i dont think you want hypermax, get the HKS superwagon R+ (i think R+)

mmm, Nismo suspension with SK's sway bars... Anyone know where I can get some by any chance seeing as SK as gone walkabouts?

TIEN Super Wagon

HKS Hipermax LS+ (adjustable)

Ok, I've been thinking about it, let's go borrow Andy's diff centre lol :wub:

I'll have to keep my eye on the wrecker's incase one comes in, I might check if NissWreck will bring one in for me ;) Their next container isn't due for a few months however :blink:

I'm sure between us all including the ARX owner's we could buy nearly the whole car up :)

that sounds like a good idea..

i wanna replace some stuff on my car..

ahhh apologies! i knew something was wrong in my head! thanks haha

Ahhhh if only that was the case, sorry to break it to you, there are lots of things wrong in your head :blink:

xoxoxo

dont make me whip your M35 with my Fiat again!!!

... and when your Fiat is tired, run down and defeated, I'll pop it in the back of the Stagea and drop you and the Fiat home :blink:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
×
×
  • Create New...