Jump to content
SAU Community

Recommended Posts

I imported this from japan thru a wrecker, it was a drivable car, they had to remove the motor and trans to allow importation. was rb20e and auto.

chassi has done 92000kms, i have had it dynoed twice since completing it and have used it at one practice day, getting over the whole car thing.

The rb25de i sourced was fitted to a torana and come with bellhousing to suit toyota and the haltech - that was still in box. I fitted twin turbos, manifolds and all supporting oil water lines from r32 gtr which had had r33 turbos fitted, i modded the manifolds to allow fitment to rb25 head. I fitted rb26 injectors and moddified in let plenum to forward facing item, also utilising velocity stacks on runners. It has toyota w58 box with custom 1 piece tail shaft. Welded diff. I had issues with valve float on dyno first time round, so i sourced a full set of rb26 valve springs from performance springs( which are 30% heavy seat pressure that standard rb26) and fitted these, fixed problem. I also had clutch slipping issues with brass button clutch that came with motor so this has just been replaced with extreme motorsport item, rated to 300rwkw. short description, will list all items fitted. power = 228rwkr@14psi. If any issues arise with rb25 short block it is very simple to add rb30 under head and associated hardware to make a rb30dett. This was my long term plan.

The body of laurel is overall good, no rust. The roof has some scraps and small dent on left side due to damage done while being loaded into container. small dent in boot caused by me rolling it into work bench, front bar is off another car and has been glassed up on inside. it is a dark green colour and car is grey in colour- see picture

Trailer: brand new trailer, built march. 11 months rego. solid axels to allow low as possible deck height, 2400mm long aluminium ramps covered in ply - low with long ramps allows easy loading of low vehicles. Hydraulic over rider brakes, jocky wheel, rear LED lights, s13 mag wheels with good tread. will come with 2 x 2ton ratchet tie downs.

Cheap tow away package

Located South of Adelaide CBD

Am chassing $12000 as a tow away package

Can call me on 0415153163 or pm me on here

whats fitted to c33:

custom plenum - velocity stacks used

r33 gtr turbos, manifolds etc

custom ali intercooler pipe work and intercooler in front of radiator - minimal cutting to fit and short pipe work

BOV

2l catch can

rb26 valve springs - new

32mm copper radiator - better cooling than cheap thick ali radiators

twin au falcon thermo and shroud setup with twin relay wiring

rb26 injectors

new spark plugs gapped to 0.7

new power steer belt

new battery

new walbro 255lb/h in tank pump

new twin air filters

haltech e6k comes with old acer laptop and serial cable for tunning as haltech is older model and uses DOS

new extreme motorsport clutch just purchased and fitted cost $930

turbosmart manual boost controller

toyota w58 gear box with rod shop belhousing

new clutch master and slave cylinders

r33 clutch pedal box and pedal

exhaust is twin 2 1/2" off std dumps then merge under passenger seat to 1 3" and exits infront of left rear wheel

boost gauge,water tep and oil pressure guages mounted in custom ali centre consol

custom hydro hand brake

sports steering wheel and boss

sparco fixed back seat mounted to super low r33 sliding rail - standard passengers seat.

fully stripped interior except for door skins and top half dash.

all windows operational ( wern't when i got it)

cusco front coil overs with camber adjustment

JIC rear coil overs

Adjustable front castor rods

adjustable rear camber, toe and traction rods

5 stud conversion- just jap front hubs, r33 rear hubs - std brakes retained

welded r200 diff

wheels are weds 17x8 17x9 +35 tyres are 70% on front and not too good on rear

spares:

2 pairs of wheels - 17x9 +38 work equips and 17x9 +38 mesh wheels - tyres fitted but arnt to flash

And a worn reclinable sports seat

post-28747-1240396941_thumb.jpg

post-28747-1240396949_thumb.jpg

post-28747-1240396964_thumb.jpg

post-28747-1240396974_thumb.jpg

post-28747-1240396987_thumb.jpg

post-28747-1240396993_thumb.jpg

post-28747-1240397000_thumb.jpg

post-28747-1240397012_thumb.jpg

post-28747-1240397023_thumb.jpg

post-28747-1240397046_thumb.jpg

post-28747-1240397068_thumb.jpg

post-28747-1240397076_thumb.jpg

post-28747-1240397082_thumb.jpg

post-28747-1240397088_thumb.jpg

post-28747-1240397098_thumb.jpg

post-28747-1240397115_thumb.jpg

post-28747-1240397121_thumb.jpg

post-28747-1240397128_thumb.jpg

post-28747-1240397139_thumb.jpg

post-28747-1240397149_thumb.jpg

post-28747-1240397170_thumb.jpg

post-28747-1240397180_thumb.jpg

post-28747-1240397196_thumb.jpg

post-28747-1240397207_thumb.jpg

post-28747-1240397223_thumb.jpg

post-28747-1240397240_thumb.jpg

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...