Jump to content
SAU Community

Recommended Posts

Hi guys, need some advice. Actually..this question is for a mate of mine. He got pulled over by two cops a few nights ago in his car. The cops asked him "Do you know how fast u were doing?" *classic question*

:)

He wasn't sure and didn't know what to say. So they gave him a ticket and said something like Oh you were doing 80. And he was quite baffled. Throughout this whole time, they didn't show any proof of a radar gun trap speed, nor was there a radar gun in sight. Now...what they next said was something to the effect that 'we're going to be nice and write it as going at 70' and promptly issued him a fine. I think the road speed was 60 if I'm not mistaken. But I'm guessing they must've tailed him for some distance before pulling him over. And if there was no radar gun shown, that means there's no proof! What's irritating is that they gave this "we're so nice we'll just fine you for a lower speed" thing. Of course..being gracious for their 'mercy' is one thing..but there's still no trap speed, hence no proof. Is there a possibility of disputing this in court? Or via a letter to the civic centre? Advice?

Thanks!

Link to comment
https://www.sau.com.au/forums/topic/26664-another-stupid-police-question/
Share on other sites

probably a good idea not saying anything at the time, as that is used as evidence against you later.

I'd say it could be disputed in court with a reasonable lawyer. Anyhow, 10km/hr or over (e..g right on 70) is still 3points and $200 or something, so doesn't matter whether they wrote down he was "only" 10km/hr over. Unless he only had 1 point left or something, than no point fighting it.

legal fees?

fight it yourself.

i just went through it all and got a 6 month suspension down to one month.

It's worth fighting. doesnt cost you anything

the police man followed me and estimated my speed.

And in the courts eyes thats open to debate.

It was alleged i was doing 100 in a 60 zone.

I said nothing on the night at all... and when it got to court i said i was doing 92 in the 60 zone.

I had spoken to the Police prosecutor in weeks prior and discussed it with him and he said that seeing as though the informant (the officer in question that has charged you) had no speed camera and was only going on what he 'thought' i was doing by looking at his speedo, which has an element of error.

So he sayus 100 - i say 92, the coppers have no proof that i was doing 100, and hence no proof to say i wasnt doing what i said of 92.

So the fine/charge was all lessened a great extent.

Also seeing as though your only down for 70 in a 60, if you were in traffic you could quite easily argue the point.

Especially if you have a witness.

1) You can say that speedo was on 60 and a car next to you went past and maybe the officer was confused.

2) you can say that there was no way it was 70, but it was more like 64 or something. that allows for a margin of error on the coppers behalf, but at the same time they still get you.

i'd go option 2 (only if the fine/demerits are less)

hope that helps ya's decide.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well, this is probably where a wiring diagram and a multimeter come into play.
    • I can say to anyone thats doing this; having done a number of R clusters; just be careful if its an unknown cluster.  It takes a bit of force to pull up; but if it feels excessive then its probably stuck. I've had this and pulled the entire hair spring out; and I can tell you; its not easy getting the correct spring replacement with the correct inner diameter and winding. In my case someone had used some sort of adhesive to stick it to the spindle and it pulled the whole spindle out; which the force seperated the hairspring from the spindal and caused it to deform.  You may have to clean it (IPA); or in my case if i'd known i should have used some sort of solvent on it.  Also check out Cruizin Central on eBay. He does all sorts of dials; and you can email him with any custom designs you want. So if you want like certain logos etc...he'll send you a mock of what it will look like then you accept the order and he'll take care of the rest. Fantastic dials and he can do basically any design you want. 
    • Have you confirmed its the actual axles? Also the wheel bearings that mount on the hubs to hold the axles wear out. I replaced mine as they got play in them. It sorted my play issue. 
    • Ive converted a few clusters for the R33 with 320km/h dials. On the back there are some pads which can be bridged or unbridged (using solder or wick braid) to calibrate it. There is one bridge which is for MPH <> KPH; and there are combinations of bridges to offset it. There is probably a diagram  For example; this is my conversion for a 180km/h dial to a 320km/h dial (I put custom GT-R dials on it with the GTS25t layout) If you have J2 soldered (assuming the S clusters have a similar config to the R clusters); you may need to remove that solder
    • Back on topic 😉, these are some of the notable pages from the booklets that are supplied with each weekly parts update. I never knew the BNR32 test mule car had an S13 Silvia front end... *Edit: On closer inspection the test car still had the R32 body, but only the front end had Silvia panels etc.
×
×
  • Create New...