Jump to content
SAU Community

Recommended Posts

The workshop redsuns88 was talking about was Chapman and Chapman (Simon Chapman), in Deshon St where ABS is now. I am not sure if has the same owners. They prepared John Teulan's GTP racer plus cars for Targa.

I have also used Gavin Wood. He is my favorite and charges about $70 for an inspection. He has the diagnostic equiptment to interrogate the ECU. If you don't have this done, its hard to find faults. He has been good to me.

A couple of points to note ( and following on from 45ULT):

DON'T TRUST THE ODOMETER READING These are easily "haircut". If I could have a dollar for every import with 70k on the clock! Jap speedo's have 185km limits so any car with a Nismo, Mines or whatever instrument cluster is also low.

BOOSTED ENGINES OVERHEAT A big radiator is an essential on modified cars. Japan is a cold place so its ok there but when you see pictures of big turbos and fancy KW claims without a nice fat radiator, you expect to replace the head gasket or block.Most GTR's are in need of major work. They are complex mechanically so any repair job has a lot of dissasembly and re-assembly of other parts to get at the faulty part. This is expensive.

Just about every seller claims the engine was rebuilt in Japan. This is an urban myth like "cheques in the mail".

mate you're way off the mark there.. also if it was me buying a 32 gtr i'd be looking for one with a fresh engine with receipts of work done. gives u a good base for modifying

all the replies are certainly helping. keep them coming.

but it really seems like getting a 32 gtr is like buying a time bomb.

it is even possible to get a 32 gtr that is in good condition?

i'm not looking at a high power gtr. i'm looking at one just to drive around and have fun when i want to.

it will just be a weekend drive.

Mate there are plenty of 32GTR's for sale on carsales.com for under $18000 and they look pretty clean :/ .

Mate there are plenty of 32GTR's for sale on carsales.com for under $18000 and they look pretty clean :/ .

car to point out which are worthy for me to go down and have a look?

http://www.carsales.com.au/all-cars/privat...id=11F84283A649

anyone seen this car? comments?

vspec II for less than 20k?

it is even possible to get a 32 gtr that is in good condition?

i'm not looking at a high power gtr. i'm looking at one just to drive around and have fun when i want to.

it will just be a weekend drive.

Sure it is.. but you have to know that on a high power car, with 20 years or so on the clock, things are starting to wear out. The odds are pretty high unless things have already been attended to.

They can be great cars, but you need a fairly heavy buffer in reserve for major problems.. And by that I mean about $10k, which may cover an engine rebuild. If that seems like a scary proposition, then maybe it's not the sort of car for you.

mine runs pretty well with the stock radiator, been cleaned and everything though, actually did a a fair few dyno runs with the dyno fan off to test temps.

Sure it is.. but you have to know that on a high power car, with 20 years or so on the clock, things are starting to wear out. The odds are pretty high unless things have already been attended to.

They can be great cars, but you need a fairly heavy buffer in reserve for major problems.. And by that I mean about $10k, which may cover an engine rebuild. If that seems like a scary proposition, then maybe it's not the sort of car for you.

after recently going through a rebuild, i agree with this. or look to one with a built motor.

Sure it is.. but you have to know that on a high power car, with 20 years or so on the clock, things are starting to wear out. The odds are pretty high unless things have already been attended to.

They can be great cars, but you need a fairly heavy buffer in reserve for major problems.. And by that I mean about $10k, which may cover an engine rebuild. If that seems like a scary proposition, then maybe it's not the sort of car for you.

perhaps it will make more sense to get a 33 gtr ?

all the replies are certainly helping. keep them coming.

but it really seems like getting a 32 gtr is like buying a time bomb.

it is even possible to get a 32 gtr that is in good condition?

i'm not looking at a high power gtr. i'm looking at one just to drive around and have fun when i want to.

it will just be a weekend drive.

don't loose heart, there are good examples of the R32 out there. but they are not cheap, owners who maintain their vehicles [ie, those that fix/repair problems as they occur] are generally not going to sell out cheaply [apart from the odd desperado] because of monies spent keeping the car in good shape. also, over the last couple of years, good R32 GTR have held there value better than the other GTR models.

point is if you find a good/well maintained one, and only drive it, as opposed to 'thrash' it on weekends you should not hear the 'time bomb' ticking!!.

there are plenty of people who own GTR's that can't afford to maintain them, that's why there are some out there on the market that fall into the 'time bomb' category.

I'll add my 2c here since I was in a similar position to you not long ago.

When I first started looking at GTRs I wanted to buy a car that had a recent engine rebuild or at the very least turbos replaced with all receipts for work to make sure it was done correctly. The problem I found with this is that its difficult to find somebody who has rebuilt an engine without cutting corners. Its an expensive thing to do properly and things do get neglected. The other trouble with a modified motor is that it puts more stress on the rest of the standard components and you get other things failing. Clutches etc.

So after looking at a lot of modified GTRs that didn't really cut it I decided to start looking for something that was as close to stock as possible. My reasoning for this was that stock GTRs are a great piece of kit and are fairly reliable in stock form. Most of the reliability issues come from poor maintenance or modifcations. If you get a decent stock GTR and treat it right it will last a decent amount of time.

Make sure you service it properly and keep an eye on your oil and you should be right.

If your only looking for something as a daily driver then a stock GTR is fine. I use mine as a daily and its a great car to drive everyday. Buy it, maintain it and love it you won't regret it.

PS. That black v spec looks worth a look.

car to point out which are worthy for me to go down and have a look?

http://www.carsales.com.au/all-cars/privat...id=11F84283A649

anyone seen this car? comments?

vspec II for less than 20k?

this model is one of a limited number; [1200+ I think, GTR buffs may correct my numbers here] and I know that good/lowkm examples of this model were bringing/asking over $30k and up $37k [through importers] last year when I was looking to buy. so I'd be wary at <$20k.

this model is one of a limited number; [1200+ I think, GTR buffs may correct my numbers here] and I know that good/lowkm examples of this model were bringing/asking over $30k and up $37k [through importers] last year when I was looking to buy. so I'd be wary at <$20k.

Most people just assume that because its a 94 model is a V spec so thats probably the case here. As you said there was only about 1200 v spec IIs made but there always seems to be a plentiful supply :P

Don't worry about buying a V spec or anything for its resale value because the only 32 GTRs that are going to go up in value are the genuine low km fully log booked V Specs, N1s and Aussie delivered ones.

Just try and find the best condition one you can afford and buy it.

That black GTR looks tired mate you can tell by the interior, its just got that freshly imported look to it and ive been a bush basher all my life in Japan. There is definately better out there. With some good mods and rebuilt motors.

Edited by subzeroR33

hey dude

for starters not all 94 gtrs are vspec cause my gtr was built 09/94 the best thing about 94 gtrs are they have had the soft older model gremlins eliminated like the push type clutch the 94s have an r33 pull type clutch set up and r33 cranks with a bigger collar for the oil pump.i dont know why every one has bagged old r32 gtrs as they are the original godzilla and are an amazing car to own and drive.so just do a normal car check high ks clutch and brake pedal wear handbrake wear will tell you alot about ks versus truth check oil leaks and usual underbody checks alot of cars look mint on the serface put them on a hoist and things become alot clearer.dont believe the hype get a clean low k 94 if poss and enjoy modifying it your self so then you will know what youve got 4 your self

good luck

hey dude

for starters not all 94 gtrs are vspec cause my gtr was built 09/94 the best thing about 94 gtrs are they have had the soft older model gremlins eliminated like the push type clutch the 94s have an r33 pull type clutch set up and r33 cranks with a bigger collar for the oil pump.i dont know why every one has bagged old r32 gtrs as they are the original godzilla and are an amazing car to own and drive.so just do a normal car check high ks clutch and brake pedal wear handbrake wear will tell you alot about ks versus truth check oil leaks and usual underbody checks alot of cars look mint on the serface put them on a hoist and things become alot clearer.dont believe the hype get a clean low k 94 if poss and enjoy modifying it your self so then you will know what youve got 4 your self

good luck

sure the R32 GTR is a great car, no argument there; but to advise Merceid to just do a "normal car check", is not good advice. to be sure he is not buying a lemon/money pit, he needs to spend the money to get a thorough GTR specific inspection.

RACQ???????? :( Come on mate you cant be serious. I would rather have my grandmother check over my car than those useless pricks.

I was actually - dad used them for a few cars he bought and checks and report were very thorough (granted that was years and years ago)

sure the R32 GTR is a great car, no argument there; but to advise Merceid to just do a "normal car check", is not good advice. to be sure he is not buying a lemon/money pit, he needs to spend the money to get a thorough GTR specific inspection.

true that

not everyone knows wot they are looking at when they look at a car do they...suppose thats not fair of me too say that to a r32 gtr newbie.

im a mechanic and have had three r32gtrs and have seen alot of r32s. the most obvious things can tell you alot about any cars history, age, condition, ect.

if i could tell you anyone to take a gtr to in qld.if they have got the time to inspect it that is, would be mark at godzilla motorsport. who else would you wanna take your gtr too than the guys with the fastest and most powerful gtrs in aus...

.

fair call thou mate

the silver gtr looks nice too :laugh:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Did this end up working? Did you take some pictures?
    • And finally, the front lower mount. It was doubly weird. Firstly, the lower mount is held in with a bracket that has 3 bolts (it also acts as the steering lock stop), and then a nut on the shock lower mount itself. So, remove the 3x 14mm head bolts , then the 17mm nut that holds the shock in. From there, you can't actually remove the shock from the lower mount bolt (took me a while to work that out....) Sadly I don't have a pic of the other side, but the swaybar mounts to the same bolt that holds the shock in. You need to push that swaybar mount/bolt back so the shock can be pulled out past the lower control arm.  In this pic you can see the bolt partly pushed back, but it had to go further than that to release the shock. Once the shock is out, putting the new one in is "reverse of disassembly". Put the top of the shock through at least one hole and put a nut on loosely to hold it in place. Put the lower end in place and push the swaybar mount / shock bolt back in place, then loosely attach the other 2 top nuts. Bolt the bracket back in place with the 14mm head bolts and finally put the nut onto the lower bolt. Done....you have new suspension on your v37!
    • And now to the front.  No pics of the 3 nuts holding the front struts on, they are easy to spot. Undo 2 and leave the closest one on loosely. Underneath we have to deal with the wiring again, but this time its worse because the plug is behind the guard liner. You'll have to decide how much of the guard liner to remove, I undid the lower liner's top, inside and lower clips, but didn't pull it full off the guard. Same issue undoing the plug as at the rear, you need to firmly push the release clip from below while equally firmly gripping the plug body and pulling it out of  the socket. I used my fancy electrical disconnect pliers to get in there There is also one clip for the wiring, unlike at the rear I could not get behind it so just had to lever it up and out.....not in great condition to re-use in future.
    • Onto the rear lower shock mount. It's worth starting with a decent degrease to remove 10+ years of road grime, and perhaps also spray a penetrating oil on the shock lower nut. Don't forget to include the shock wiring and plug in the clean.... Deal with the wiring first; you need to release 2 clips where the wiring goes into the bracket (use long nose pliers behind the bracket to compress the clip so you can reuse it), and the rubber mount slides out, then release the plug.  I found it very hard to unplug, from underneath you can compress the tab with a screwdriver or similar, and gently but firmly pull the plug out of the socket (regular pliers may help but don't put too much pressure on the plastic. The lower mount is straightforward, 17mm nut and you can pull the shock out. As I wasn't putting a standard shock back in, I gave the car side wiring socket a generous gob of dialectric grease to keep crap out in the future. Putting the new shock in is straightforward, feed it into at least 1 of the bolt holes at the top and reach around to put a nut on it to hold it up. Then put on the other 2 top nuts loosely and put the shock onto the lower mounting bolt (you may need to lift the hub a little if the new shock is shorter). Tighten the lower nut and 3 upper nuts and you are done. In my case the BC Racing shocks came assembled for the fronts, but the rears needed to re-use the factory strut tops. For that you need spring compressors to take the pressure off the top nut (they are compressed enough when the spring can move between the top and bottom spring seats. Then a 17mm ring spanner to undo the nut while using an 8mm open spanner to stop the shaft turning (or, if you are really lucky you might get it off with a rattle gun).
    • You will now be able to lift the parcel shelf trim enough to get to the shock cover bolts; if you need to full remove the parcel shelf trim for some reason you also remove the escutcheons around the rear seat release and you will have to unplug the high stop light wiring from the boot. Next up is removal of the bracket; 6 nuts and a bolt Good news, you've finally got to the strut top! Remove the dust cover and the 3 shock mount nuts (perhaps leave 1 on lightly for now....) Same on the other side, but easier now you've done it all before
×
×
  • Create New...