Jump to content
SAU Community

Electronic Boost Controller

sky88
 Share

Recommended Posts

sky88 Rising Star

sky88

Posted
Posted

Hi,

I have this Electronic boost Controller, which I bought 3 weeks ago and have decided to sell it looks very good $300 delivered anywhere in Aus.

Here is the description.

Electronic Turbo Digital Boost Controller Black JDM

Brand New!

Features:

* Built-in turbo timer & voltage meter

* Adjustable High/Low boost setting

* Two 12V channel outputs (for nitrous, intercooler sprayer, cry02 sensor, electronic exhaust diverter)

* High performance boost controller solenoid for internal/external wastegate.

* Preset boost settings.

* Digital display screen.

* Comes with all proper accessories for a successful installation.

Applications:

* Universal Application

The electronic boost controller (BCU+) is the first boost controller to feature multiple stages of boost, an in-built turbo timer, boost gauge, voltmeter, and two 12 Volt outputs. It comes complete with a solenoid valve. This boost controller uses the latest technology to give the user multiple ways of controlling and monitoring boost levels. Providing High and Low stages of boost and adjustable gain, the boost can be tuned to switch depending on track or road conditions.

The BCU+ also incorporates an Automatic and Manual Turbo Timer to let your engine cool down after a run. By using the electrical Outputs, you can use the BCU+ to control any 12V DC source, like a nitrous kit and/or intercooler spray. Know exactly what's going on with your engine by using the Last Boost and Voltmeter settings on the easy to read LCD screen.

Multiple stages of boost (two stages)

Built in turbo timer (auto and manual)

Boost Gauge

Voltmeter

Two 12 Volt outputs

BCU+ uses the latest technology to give the user multiple ways of controlling and monitoring boost levels. With High and Low stages of boost and adjustable gain, you can tune the boost to switch depending on track or road conditions. The BCU+ also incorporates an Automatic and Manual Turbo Timer to let your engine cool down after a runb by using two electrical Outputs, you can use the BCU+ to control any 12V DC source, like a nitrous kit and/or intercooler spray. Know exactly what's going on with your engine by using the Last Boost and Voltmeter settings on the easy to read LCD screen.

The Turbo Timer has both Automatic and Manual settings. This allows the user to manually set how long the vehicle should continue to run after the key is removed from the system. Or, for an even easier setting, allow the BCU+ to calculate exactly how long your engine should run based on how much boost the engine has seen.

The Switching System is a great feature for drag racers! The BCU+ has the ability of controlling any 12v accessory based on the following criteria: Boost Level

Boost Level

Manual Timer

Automatic Timer

Limit Feature

Warn Feature

Start Boost Setting

This means you can control a nitrous system based on boost levels! This, however, is not the only option. Any electrical component, from LEDs to intercooler sprayers can be controlled by the BCU+. Please see the Optional Wiring Section of this installation manual for detailed information.

Compact Design

The BCU+ comes in a 4.17" x 4.65" x 1.1" compact design and uses on the the smallest solenoids around for an easier installation both inside the car and under the bonnet.

Information Display

The BCU+ has an LCD screen so that all the functions and settings can be viewed.

Boost Setup

Two different boost levels can be easily setup by turning the Hi and Lo knobs

Safety

The BCU+ has multiple safety features. Over boost - The LCD background display will turn red and an audible alarm will both warn the driver if over boost occurs. Limiter - The BCU+ has limiter which will limit the amount of overboost by modifying the opening of the solenoid based on the preset limited % and preset boost.

Turbo Timer

The BCU+ has a manual and automatic turbo timer. The manual timer allows the engine to run for a specified time adter the key has been removed from the ignition; and the automatic timer allows the engine to run for a certain amount of using voltage variation once the key has been removed from the ignition.

Channel Outputs

The BCU+ boost controller can be programmed to activate and deactivate electrical components when certain specified criteria are met.

Complete Kit

Vacum tube, cables and solenoid valve are all included.

The electronic boost controller (BCU+) is the first boost controller to feature multiple stages of boost, an in-built turbo timer, boost gauge, voltmeter, and two 12 Volt outputs. It comes complete with a solenoid valve. This boost controller uses the latest technology to give the user multiple ways of controlling and monitoring boost levels. Providing High and Low stages of boost and adjustable gain, the boost can be tuned to switch depending on track or road conditions.

The BCU+ also incorporates an Automatic and Manual Turbo Timer to let your engine cool down after a run. By using the electrical Outputs, you can use the BCU+ to control any 12V DC source, like a nitrous kit and/or intercooler spray. Know exactly what's going on with your engine by using the Last Boost and Voltmeter settings on the easy to read LCD screen.

Multiple stages of boost (two stages)

Built in turbo timer (auto and manual)

Boost Gauge

Voltmeter

Two 12 Volt outputs

BCU+ uses the latest technology to give the user multiple ways of controlling and monitoring boost levels. With High and Low stages of boost and adjustable gain, you can tune the boost to switch depending on track or road conditions. The BCU+ also incorporates an Automatic and Manual Turbo Timer to let your engine cool down after a runb by using two electrical Outputs, you can use the BCU+ to control any 12V DC source, like a nitrous kit and/or intercooler spray. Know exactly what's going on with your engine by using the Last Boost and Voltmeter settings on the easy to read LCD screen.

The Turbo Timer has both Automatic and Manual settings. This allows the user to manually set how long the vehicle should continue to run after the key is removed from the system. Or, for an even easier setting, allow the BCU+ to calculate exactly how long your engine should run based on how much boost the engine has seen.

The Switching System is a great feature for drag racers! The BCU+ has the ability of controlling any 12v accessory based on the following criteria: Boost Level

Boost Level

Manual Timer

Automatic Timer

Limit Feature

Warn Feature

Start Boost Setting

This means you can control a nitrous system based on boost levels! This, however, is not the only option. Any electrical component, from LEDs to intercooler sprayers can be controlled by the BCU+. Please see the Optional Wiring Section of this installation manual for detailed information.

Compact Design

The BCU+ comes in a 4.17" x 4.65" x 1.1" compact design and uses on the the smallest solenoids around for an easier installation both inside the car and under the bonnet.

Information Display

The BCU+ has an LCD screen so that all the functions and settings can be viewed.

Boost Setup

Two different boost levels can be easily setup by turning the Hi and Lo knobs

Safety

The BCU+ has multiple safety features. Over boost - The LCD background display will turn red and an audible alarm will both warn the driver if over boost occurs. Limiter - The BCU+ has limiter which will limit the amount of overboost by modifying the opening of the solenoid based on the preset limited % and preset boost.

Turbo Timer

The BCU+ has a manual and automatic turbo timer. The manual timer allows the engine to run for a specified time adter the key has been removed from the ignition; and the automatic timer allows the engine to run for a certain amount of using voltage variation once the key has been removed from the ignition.

Channel Outputs

The BCU+ boost controller can be programmed to activate and deactivate electrical components when certain specified criteria are met.

Complete Kit

Vacum tube, cables and solenoid valve are all included

post-26114-1240531616_thumb.jpg

post-26114-1240531624_thumb.png

post-26114-1240531634_thumb.jpg

post-26114-1240531641_thumb.jpg

post-26114-1240531649_thumb.jpg

post-26114-1240531656_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/266827-electronic-boost-controller/
Share on other sites
  • 2 weeks later...
  • 3 weeks later...
r33 parts Enthusiast

r33 parts

Posted
Posted
still for sale can sell for only $185.00 delivered.

hey mate if you still have it ill take it today $150????? 0430540512. save you the hastle ill give u cASH TODAY LIKE AS SOON AZ U RING ME CHEERS

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • QB6SAGR
      Tein Circuit Master- rebuild worth it?

      By QB6SAGR · Posted

      Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • funkymonkey
      Howdy Y'all

      By funkymonkey · Posted

      Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Dose Pipe Sutututu
      Starting again

      By Dose Pipe Sutututu · Posted

      Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • R33_Guy
      Speed Sensor replacement

      By R33_Guy · Posted

      Thank you so much for the help
    • GTSBoy
      Speed Sensor replacement

      By GTSBoy · Posted

      Yes it is ATF. I quote @Duncan "it takes a good synthentic auto trans fluid like Castrol Transmax Z" It's not a diff. It's a transfer case. Totally different thing. Yes, fluid will come out the sender hole. No you do not really need to drain it. Just pull the old, quickly poke the new, clean up and top up. But realistically, you should probably take the opportunity to change it anyway.
×
×
  • Create New...